Customization :: Any Way To Change Boot Logo?
Sep 28, 2015Is there currently any know way to change the windows 10 boot logo? I have searched around and found nothing.
View 9 RepliesIs there currently any know way to change the windows 10 boot logo? I have searched around and found nothing.
View 9 RepliesI would like to change the Windows white start up logo (see photo) to a more colorful one.
In an earlier Ten Forums post there was software that did this called "Windows 8.1 start button changer" which is no longer available. The replacement software is called "CustomizerGod" but when I tried downloading it I received several virus warnings. Is there other software available that is "safe" to use?
Solved How to change Start Menu icon?
How do I change this screen? Change in non Uefi Mode? My motherboard is 5 years old. Can this be done without switching to UEFI?
View 2 RepliesYesterday morning the PC worked fine. Last night it refused to load Windows (10) but rather froze on the logo, with the whirly loader. Forced shut down, tried again, same deal. Next time it said "Starting Windows repair", but froze. Next time it said it too, and the next time it didn't. It hasn't said it since. I left it sitting on the frozen screen for about a half an hour, and it gave an error message "Boot disk inaccessible". Unhooked everything, reset CMOS, checked BIOS, reseated memory, ran memory diagnostics, etc..
So I put in a brand spanking new SSD assuming the old one was to blame (as it had become a bit sluggish anyway, being a few years old and all) and went to install new Windows from an official USB stick. And up comes Windows logo and the whirly loading thingy.... and it freezes. I just don't know what to do anymore.
When i start the laptop it stops at the dell logo and does nothing till the time i dont press a key. After pressing a key it starts log in.
View 1 RepliesAll was good and well, until my Windows 7 on another drive gave me an NTOSKRNL.EXE error (fixed now). My Windows 10 booted fine at this point, but after entering my password, it was stuck on "logging in" for quite some time. I forced a reboot, and then I was stuck in the "Performing Automatic Repair" loop.
I eventually got out of this, only to be greeted by a "BAD_SYSTEM_CONFIG_INFO" BSOD. After replacing files from RegBack, I managed to get it to boot, but now I just see a black screen with no cursor. I've tried logging in and I had Chrome Remote Desktop but that didn't work either.
It's really not okay for Windows to just mess up randomly. The NTOSKRNL error from the other drive COULDN'T have caused this problem.
Samsung RC510 - Got stuck at windows 10 logo when trying to boot into USB.
BIOS Type:PhoenixBIOS Date:January 19th, 2011BIOS ID:03HU.M008.20110119.KSYBIOS OEM:03HU.M008.20110119.KSYChipset:Intel 044 rev 2SuperIO:UnknownManufacturer:SAMSUNG ELECTRONICS CO., LTD.Motherboard:RC410/RC510/RC710
New Dell XPS8700. Upgraded from Win 8.1 to Windows 10 and worked fine for about a month.
On start-up, it now hangs on the Dell logo or when trying boot options to start from USB or recovery DVD go to blank black screen. Dell phone support sucked but they sent me a recovery USB drive (to factory set Win 8.1), however start-up would still hang at the Dell logo. Tried all different boot combinations from CD/DVD, USB, OS/Boot partition but cannot proceed beyond Dell logo or black/blank screen. I do not have a original Windows 10 OS disc, however did a download from
HTML Code: [URL] .... to USB and PC does not boot up from that media either.
Used an original Windows 7 Ultimate installation CD to start and get to command prompt to recover files from C: drive and can browse through all folders and files. Copied user data to USB drive. So HDD appears OK.
Background: So, I have an ASUS R557LA-XO1543H laptop. That i supposedly only needed to reset totally and then install F-Secure Safe, well after the reset, on the Windows 10 installation, when came the step to create a Microsoft account(or skip it, which i wanted to do). So at this point i realized, the touchapd doesnt work, nor did anything happen when i plugged in a mouse.. keyboard nothing as well, so i decided to shut down and restart it, well, then it went to the "defaultuser0" screen, which i found a solution to (hold shift, restart, go through certain steps and create a new account), well after i restarted the laptop at the point i had created a new user, as the guide told to, the laptop would only go to black screen after the ASUS logo. So i tried mashing some buttons, and eventually i got to my current problem.
So upon boot the ASUS laptop, after the asus logo, goes to this state "moving to hibernation". Yet I havent found any solution to this, and to speed up the process of finding a solution im posting this here.
ASUS laptop goes to "moving to hibernation" after the asus logo on boot.
I have had this issue for a long fing time now. like at least 10 clean installations of windows and it still keeps on happening. you can only imaging the amount to frustration im going through right now. I just did another clean install and now im trying everything to avoid this. I even tried switching to enterprise version of windows
I get this issue where the boot logo (win logo with circle) shows up twice. like once and then the screen goes blank for a sec and then i see that shitty thing again but its laggy this time.... I think this is the problem that finally leads to the start menu disappear thingy..
I have a Lenovo laptop upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stucks in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files).
View 2 RepliesThe other day, I tried to do a factory reset on my laptop, but it failed, and I could only click cancel. Now, when I booted up my computer, it goes to the ASUS logo, then a black screen, still backlit, with an underscore flashing in the upper left corner of the screen. I can access the BIOS, and have been trying to do boot overrides. I don't have the ASUS Recovery partition installed on the laptop, and I don't have any possible ways to install an ISO. T
View 2 RepliesI have my desktop picture set to change every hour or so but despite trying various settings it only seems to change every month or two!
I have two monitors driven by a Nvidia Quadro 600. Neither display is changing.
Also, when I first setup the two monitors, the screens aver would alternate the images on the two monitors. i.e. Pjicture A on right then B on left with A still on right, then C on left with B still on right, and so on. Now A appears on right with left blank, then B on left with right blank. Not sure why it changed.
Not a vitally required fix but it would be nice if it behaved as it should!
I just upgrade windows 10 from windows 7 and I'm customizing some default folder to match my settings in my windows 7. I got a little problem and it's really annoying me. Here is the screenshot of my This PC
as you can see, I change the windows default folder for downloads to drive F:. How can I make it to show the drive name instead of drive letter? I used the same steps I do in windows 7 and it was working, but in windows 10, it change the download folder to drive letter.
So I want to make a new font to use on my computer instead of Arial but I can't figure out how to change the default font.
View 1 RepliesUnderstand that default Title Bar in Windows 10 is white, However when I click on themes (which shows various title bar/window borders colors (or Shades) my Title Bar stays completely white.
View 1 RepliesI installed windows 7 as a dual boot with windows 10 (as I was having some compatibility problems with some programs) but now the boot UI has gone back to the old black text based UI.
I was just wondering is there a way to get the modern blue boot UI back?
I am trying to have my computer boot Linux by default, from an external hard drive, while my internal drive has Windows 10 on it. Unfortunately I cannot get it to work: Windows 10 boots automatically at every restart and cold start.
Steps I've taken so far:
The boot order I want is set and saved in BIOS. There's no uEFI on my computer.
Windows 10 fast startup option is disabled. I also disabled the hibernation option just in case.
Still, I can only get Linux to boot by going into BIOS every time and selecting the (already selected) external hard drive again. When I then try to mount the internal (Win 10) disk from within Linux, I get an error saying it cannot be mounted because Windows 10 is still using it.
how to solve this and give full boot control back to BIOS?
There's no way, i can't change the taskbar color.No matter if i go to Settings - Colors and change the options, it keeps showing me a white ugly taskbar. i've found in my w10 installation.
View 5 RepliesI was wondering if there was a way to change the look of the window buttons to something like Windows 8.
Here's what that looks like: [URL] ....
I was wondering how you change the language in the start up? Like when the computer is shutting down/turning on, when you wake it up from sleep and enter a PIN, etc.
When I was picking the language in the initial start up, I accidentally chose French because the touchpad was really grippy. I've changed the language back to English for when I'm actually using the computer, but the start up and lock screens are still in French.
I am using Win X Pro. I just noticed that I could not change the desktop background. It says "Some settings are managed by your organisation". I am the only one using this PC and there is no other account. I can change the colours, lock screen and themes.
View 4 RepliesCannot change background image on Windows 10, and not because I don't know how. It simply is not working!
View 9 Repliesis it possible to change the color transparent of tiles windows 10 by one personalized Windows style 8.1 I leave a catch edited by Paint
View 1 RepliesWhen I go to Settings -> Personalisation -> Background and try to change my wallpaper to one of my own pictures nothing happens. When I choose one of the Windows pictures (that one of the guy running along the beach with those big rocks in the background for example) again, nothing happens. The only thing I can do is change it to another solid colour.
Bizarrely, on my wife's account (we're both Administrators) she can change the wallpaper to whatever she wants.
I am not liking the very thin black window borders, when I open a lot of windows it can be hard to tell where one ends and another begins.Is there any way that you can increase the thickness of the window outline?
View 9 Replies