downloaded 10 on two pc and a laptop. with the laptop the screen size was adjustable, for the pc the screen is too far to the left unable to see start button. display over sized screen on pc only
View 2 RepliesIs there a way to prevent the screen from turning off when the computer is locked? She likes her lock screen images but the screen turns off after 30 seconds or so when locked. (I tried telling her to use desktop wallpaper, but she likes the lock screen better.)
View 1 RepliesI set my live tiles up as wide or large, and none were live. Not even Calendar or Mail. I resized them to medium and they all woke up. Even Store and Maps went live.my live tiles are only live when sized medium, they are dead when sized larger.
View 6 RepliesFor some reason all of a sudden, everything on my screen is upside down.
View 3 RepliesI just updated to Windows 10 and now my slide show is displaying different slides - they used to display the same slide. Anyway I can display the same slide on both screens at the same time?
View 1 Repliesis there anyway i can display my details panel on the bottom ? like it used to on win 7?
because windows 10 shows it on right hand side, but it's just taking too much of the space on my screen, it's really inconvenient when you open 2 folders and snap to sides and modify files.
I had windows 8 on my toshiba laptop and due to having lost my glasses for a week I upsized the screen to make everything larger - I didnt think about this and then free upgraded to Windows 10. Now my display is stuck at the bigger size which causes issues with allsorts of programs for example I may not be able to see the OK box to click it as it is below edge of screen however if I go into screen settings to try and reduce the size it says I am set to the smallest size .....
View 3 RepliesI'm trying to get my small taskbar to display both time and date, like the regular big taskbar. By default, Windows displays time and date on the taskbar in bottom-right corner. But if you go into taskbar's properties and select the option to show smaller icons, the taskbar becomes a little bit smaller (which is great) and there's no room for date to be displayed (which is not great at all).
I found a few "solutions" for Windows 7, like using some third-party apps to override the default one (but there's all kinds of issues with them), or creating a new toolbar pointing to a folder that is being renamed everyday via schedule (ridiculous!) and so on.Back when I was using Windows 7, I found a dark theme that actually solved this problem (google "cryeR deviantart windows 7 basic black theme"). You had to take ownership and replace the Aero.msstyles file, and then patch some stuff with provided utility. Kinda complicated, but it worked.Now I'm on Windows 10, and I can't find anything that would work. I really like the smaller taskbar, but I would also like to see the date.
some programs display the filename before the program name in the taskbar eg notepad and MSword2013
some programs display the program name first eg powerISO + most others
because my taskbar space is limited i need only the program name displayed next to the program icon.
if i have several copies of the same program running at once and i can only see the program name in the taskbar
Today I have been using my PC as usual, I got info of Windows Updates (I'm using Windows 10) I opened up the updates and restarted my PC. As the PC was launching I got no display at all. Blank screen, nothing at all as if the PC was not detected. I tried restarting PC, removing graphics card / ram then replacing them but no use.
View 1 RepliesWhile using PowerPlanner7, I believe I may have accidentally turned off display or brightness to 0. I am unsure if I successfully made it back to the desktop after rebooting(my attempt to solve the problem). I have tried searching the Internet for shortcuts that re-enable screen or turn brightness up(my keyboard brightness buttons do not work since I am on Mac and the functions keys are all remapped- holding fn then function is same as just pressing function now too)
View 5 RepliesI every now and then, but lately too often, get a pop up and my screen goes black..that the intel graphics display was not working but has been restored..then after 20 seconds or so the screen comes back on...BUT, it mentions for Windows 8..I have a new PC with windows 10.
View 1 RepliesNow have two 1" black bars on monitor. Am not a computer wizard - just switch and use ...
View 2 RepliesSo the bottom of my monitor display is cut off. It is a Dell ST2010 monitor very old but still in working condition. It has nothing to do with screen resolution btw.
This is how it looks now, the problem started occurring like 3 months ago
This is how its suppose to look when i take a screen shot of it
Since installing windows 10 on my old dell, i am having major problems. The Computer is very slow, and is probably too old to properly run the new Windows, but the biggest issue is that after a restart, i am seeing a split screen display with a line through the centre of the screen, and i can find no way to get it back to a single display. After multiple more restarts it has gone back to one screen, but i am now getting two again. In case i am not being clear, here is a photo of what i am seeing.
View 2 RepliesMy mother has a HP Touchsmart 600 that I upgraded from Windows 7 to Windows 10. Windows 10 works fine on there, once it finally boots up. I've noticed this scenario. Power Button to turn on computerBIOS DisplaysWindows 10 logo displaysscreen goes completely black for a couple of seconds Screen comes back on, stays dark/gray and I can see my mouse pointer and it moves. The boot process hangs here for several minutes, usually and most of the time, the computer doesn't even go past this point.EVENTUALLY, after several minutes, Windows 10 finally gets to the login screen, if it is going to login.
View 6 RepliesMy monitor resolution is 2560x1080 and it's cut off on both the left and right sides of the screen. I can't figure out how to fix it. Here's a picture to show what I'm getting....
View 1 RepliesI just updated my display driver to the latest from Nvidia. Now the left half of the display is darker than the right half. I tried uninstalling the driver and reinstalling, but the problem remains.
The driver is Nvidia 355.60 WHQL , and yes my display card in on the list of supported cards. This is the driver for Windows 10 64 bit and my Nvidia GTS 450.
I have never seen this issue before and I don't know if it is Windows 10 or the Nvidia driver causing the problem.
I've been having this issue for almost a month now and nothing I have done has managed to fix the issue. Randomly I will get this error message:
After a few of these error messages it will eventually BSOD or freeze as seen here:
I will get both of these by doing pretty much any task on the computer, whether it be watching a video, browsing a site or even just sat at the desktop. However extremely interesting is the fact that this error will not appear in any form whilst playing games on the computer. It will not error or BSOD or anything. But doing any other task will do so, even if i have 1 program running on my entire PC.
Things I have tried so far:
Updating drivers
Uninstalling/reinstalling drivers
Installing beta drivers
Using 'Display Driver Uninstaller' to clear drivers
Cleaned out the PC of all dust present
Took out and reseated graphics card from motherboard
Put my 2 RAM sticks into different slots on the motherboard
Unplugging my 2nd monitor so I am only using one
Adding a TDR delay to my registry
Full virus scan
Updating my BIOS software
The only things I have not tried is swapping out hardware components as I am unsure if it is a hardware issue or a software issue as of yet.
I've noticed that the BSOD and errors become more common the longer the PC is left on. For example last night it was blue screening every 5 minutes of being active.
The error does not seem to continue whilst in safe mode as last night i spent a long time in 'Safe Mode Networking' in order to look up possible fixes. I am not sure if it does not continue because of drivers not being in use or because the quality is much lower than normal.
I just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. How to correct. The second display shows a black screen with the message "Cannot Display This Video Mode".
View 6 RepliesWhen i upgraded to windows 10 on my toshiba laptop the display changed from black printing on a white background to blue printing on a black background which i can"t read. my old eyes aren't working so well any more and i would like to switch back to the black on white.
View 1 RepliesI was just wondering if there was a way to customize the background of the screen where you are prompted to enter the background
View 1 RepliesOn startup, I have it set to display the Start Screen without the Start Menu. When I exit an app the Start Menu is displayed and I have to click the Windows icon to once again display only the Start Screen (tiles only).
View 5 RepliesHow do I set up a screen saver in windows 10
View 4 Replieshow Customize the Windows 10 Log-On and Log-Off Screen in Build 10240? i like a black color!
View 3 RepliesMy lock screen it always changing or making its own picture. Even though I set it with the picture I like.
View 1 Replies