Customization :: Narrator Kept Popping Up At System Boots
Aug 19, 2015
since I couldn't find any way to stop this thing from constantly showing up at every boot , even after ALL settings for it were "OFF" I decided to go another route. It was really beginning to bug me. I had to close it manually each time to get rid of it.
I opened the system 32 folder in Windows, found the narrator.exe did a right click and took ownership of it and changed all security settings to full control, than re named the thing using a - in front of the name and saved it.
that did it and now its gone!
if I really ever wanted to use it I can always reverse the name back.
View 9 Replies
Similar Messages:
Feb 10, 2016
When i click on the icons located on the system tray (Battery, Wifi, sound volume, notification, and time). nothing happens.
View 6 Replies
Aug 2, 2015
I am having a problem booting up for my windows 10. Every time that i boot it up for the first time, it boots up with sounds but there is no display after windows 10 logo showed up. The only solution is i need to hard restart then it boots up properly.
View 1 Replies
Sep 6, 2015
Last evening as I was on my system like normal; all the sudden I got a popping sound and my system shut off. I then tried to turn it back on and it won't power back on even though I can see power is getting to the system board because there is a power and reset button on the board that are lit up. I just let it rest over night and tried again just now but it still will not power on. Does this sound like a power supply issue?
View 9 Replies
Feb 12, 2016
Hp Envy laptop with Windows 10. How do I turn on narrator.
View 2 Replies
Aug 12, 2015
My magnifier and narrator auto-start on the lock screen despite them both being switched off in the Ease of Use panel. The narrator turns off when the desktop loads and the magnifier stays on in the shape of the magnifying glass in the upper left area of the screen. It's not debilitating just annoying. How to fix it or maybe a regedit that can get rid of them completely?
View 1 Replies
Jun 26, 2015
PC specs(that seemed necessary to mention):
gtx 970
78lmt-usb3(because of windows 10 i cant update bios.drivers)
windows 10 preview
So I have finally built my first computer which is running windows 10 since Ididn't want to buy another os. I also ported my oem hard drive over which i used to do a fresh install of windows 10 on. Here's the problem my computer keeps booting with two screens:
1. says award modular bios v6.00pg...detecting ide drives...
2.usb storage device: san disk....verifying dmi pool data.....update success.
So my computer does boot up and seems fine however why does it boot up with these pages? Plus when i shut down a pop up says. the instruction at )x))))7FF99D88CC60 referenced memory at 0x0000000000000. tThe memory could not be read. Click OK to terminate the program.
View 1 Replies
Mar 9, 2016
since installing Windows 10 the computer boots up by itself, as I am not that much into computers the only way I can stop this happening is to unplug the main power cable after powering off.
View 11 Replies
Aug 14, 2015
No matter what application I open, whether it be a video in an internet browser or a game, I can't hear anything. I then have to reboot my computer, to which everything works fine. I do not have a sound card. I have an HDMI cable connected straight to my graphics card. The problem only started happening when I upgraded to Windows 10.
View 2 Replies
Dec 29, 2015
Upgraded from Windows 7 a couple of months ago with no issues. Then a few weeks ago computer wouldn't boot and needed several tries of using the reset button and also turning it off and on to get it going. No error messages at all. Tried a clean boot to no avail and yesterday used the Recovery/ Reset option. No issues with that, all went well and I re-installed a few programmes like Mailwasher, Avast, Malwarebytes, Firefox and Thunderbird. This morning it was back to the old issue of not booting for several tries. Then it came on.
So the Reset did nothing. I have never received any error messages. Once it gets going it works fine but it is becoming very tedious to have to wait so long for it to start.
View 17 Replies
Aug 10, 2015
Below is the current issue I am experiencing with Windows 10. My computer has been running normally for days after having installed the software, only while booting today have I been experiencing this issue. I have tried doing restarts and fully turning the computer off, nothing seems to work. Also the hidden files do not normally show up on my desktop.
View 9 Replies
Nov 12, 2015
It gets as far as the login screen, and after I enter my password the circle of little dots just spin, and spin and spin...
I bought this tablet a week ago, it is an Acer One 10 s1002-145A. Earlier today I checked for updates, and tried to download the update to the new build. It never got past 0% downloading.
There were a lot of other strange problems that just started happening today also, when I would try to access links from the Control Panel, the screen would just become inactive - I was unable to interact with or close that window. This happened when I attempted to System Restore also. Attempting to open a CMD prompt as an Administrator would yield no results, except eventually an error message would appear telling me that the CMD window "failed to execute in a timely manner" (or something close to that).
View 2 Replies
Jan 29, 2016
I got a custom built pc for christmas and it has been getting BSOD's since it was built and they have only been happening on cold boots, and the file that is having problems is ntoskrnl.
View 9 Replies
Nov 29, 2015
My PC is fully clean, defragmented and it has no viruses, but my PC boots up very slow... So I went to check whats making the boot so slow and I've seen that windows audio needs 77 seconds to boot up.
View 2 Replies
Aug 3, 2015
Prior to a couple days ago, my system was setup in a dual boot configuration, with Windows 8.1 (not set as Default, but technically my "primary"), and the Windows 10 Technical Preview (Default) which I used to play around with as a sort of clean work environment. OS's were installed on physically separate drives.
A couple days ago, I successfully updated my 8.1 installation to 10. Dual boot still functioned properly, although this upgrade reset the 8.1-now-10 to Default OS.
Shortly after, I decided to wipe the Technical Preview drive, and do a clean install of the now-released 10, and reset my whole little work environment. After installation was completed, I immediately noticed that no boot menu presented itself, even for a moment. Additionally, in the Advanced System Options/Startup & Recovery, no other OS choices appear.
For some odd reason, there was ONE thing I did differently during this installation though: Normally, on a clean install, I will delete ALL existing partitions on a given target drive, and allow the setup to recreate them. However, this time -- possibly because the new-ness of 10 had me slightly confused -- I deleted only the primary data partition that contained the Tech Preview install, but left the System Reserved and OEM Reserved partitions. I'm unsure if this is the source of my troubles or not.
Regardless, as of right now, I'm unable to access my original 10-upgraded installation, and getting this restored.
As I'm sitting on a clean install of my 2nd OS, I've no problems with wiping it and trying again.
View 5 Replies
Jan 9, 2016
I have 3 drives. A 60GB Intel SSD which my OS is installed on, a Samsung 120GB SSD which has just games, and a 1TB HDD for all my other media and documents. A while back my power cut out and when trying to reboot it would fail until I tried booting from my 120GB SSD, which didn't make much sense as my OS is my 60GB Intel SSD. After that I had no issues for a long time until recently where my computer (after updating overnight is my guess) wasn't booting until I tried booting from my 1TB HDD, which confused me even more as again my OS is not installed on my HDD. And now I'm basically in a situation where my PC will boot every once in a while FROM the 1TB, today it wasn't booting from any drive for a while until I unplugged and replugged the SATA cables from all of them then tried again. I have a backup of my OS on a hard drive and made a system repair disk for windows 10.
View 1 Replies
Feb 10, 2016
When I mouse over to the system icons, they usually show the description of the system icons.For example, when I mouse over to the Wi-Fi icon, the connected wifi name would pop-up in a description box. or if I mouse over to the speaker, it would show 'sound' pop-up box.It doesn't show any pop-up box now for every system icons except the notification icon.
View 1 Replies
Feb 10, 2016
Im New Member and New User for Windows 10. This is My 1st Thread..I Want This Icon as ICO to Use for Shortcut Icon and Pin to Taskbar (I Think Size is 128x128 ?) (Use for NirCmd)
View 3 Replies
Nov 6, 2015
How to take the system tab off the ribbon in File Explorer?
View 1 Replies
Oct 21, 2015
I upgraded my preview build of Windows 10 (10130) to the pro final version because the preview wasn't able to find additional builds and kept crapping out on standard updates. All went smoothly, but the first thing I noticed is that the next time I booted cold, Windows 10 would get past the "starting windows" screen and play the startup sound.
However, the logon interface never appeared, or the cursor. All that was displayed was a solid black screen. I hard reset by holding down the power button and tried it again, which gave me the same thing. Again, hard reset. This still commonly happens, along with my CMOS date/time settings apparently being wiped after such reset. Sometimes the cursor appears, but mostly it doesn't.
Usually after trying enough times it'll pull through or by starting it after selecting a recovery option from F8. "Enable low resolution video" I know worked before, but it didn't give me low res display. (Not that I'm complaining) It could likely be because I installed over the preview, and in-place installations typically have issues. I'm also running a program to provide titlebars with aero styled glass transparency, and my graphics driver is up to date.
View 9 Replies
Feb 10, 2016
I have an Asus AiO ET2221A upgraded from Win8.1 to 10 3 months ago, and today only boots into the EUFI BIOS screen. There are no errors reported on Boot, just the BIOS screen
I was able to run Memtest from a DVD - fine, but couldn't boot into Hirens on USB or DVD. The BIOS does list the hdd partitions, plus I can search the hdd partitions/folders from within BIOS(!!).
I did remove and run Chkldsk on anther PC which showed/replaced several errors (20 bad sectors). I also loaded the latest BIOS download onto the hdd which in theory I can access from within BIOS. However after replacing the hdd after the chkdsk repair, it still wouldn't boot into Windows.
I am surprised as I would expect the BIOS to report it can't find the Windows (if it is the disk), rather than stick in BIOS without any diagnostics.
So I am still in a quandary as to whether this is a BIOS issue and/or a HDD issue, plus by upgrading from 8.1 to 10 the latter usually corrupts the Windows (8.1) recovery partition.
I am no expert on EUFI BIOS, but I understand that the Windows License is stored within the BIOS. If I try and re-install the BIOS is the license retained? And from that could I also re-install WIndows 10 from a download?
Edit: since posting I have got the system to boot into Hirens, but as soon as XP starts to load it turns off the USB mouse/keyboard so becomes useless. All I did was to switch off secure boot, and specify the boot order, either optical or USB. Progress but not sure what it tells me, or how I can get the usb mouse to work in Hirens in a eufi system (not had this issue before with non-eufi systems).
View 9 Replies
Jul 30, 2015
When my computer boots up now, it is showing my email address and is asking me for my password.
I don't want that because others are going to be using it here at home.
I don't want any restrictions for accessing this pc.
How do I get rid of the requirement to enter my email password?
p.s. same thing happens when I restart or wake it up from sign out.... it asks for my password.
View 1 Replies
Jan 2, 2016
Is it normal for the Start Menu pane to appear as soon as the computer boots up or comes out of hibernate? This happens on mine every time and I see nothing in Settings to change it. As soon as Windows opens, I have to click to close the Start Menu pane. It would be nice to not have that happen. Is there a way to change this, or is it a normal thing now?
View 5 Replies
Aug 4, 2015
I just upgraded to Windows 10 a few days ago and ever since, I've been getting a random popping noise in my speakers. I have tried everything I can think of. I've updated my drivers and my Bios. (From HP site) I've uninstalled and reinstalled the audio (Realtek) driver. This problem never happened in Windows 8. I'm about to switch back to Windows 8.
View 3 Replies
Oct 21, 2015
Since I upgraded to Windows 10, many things have been problematic. However, my issue currently is that the Date and Time keep popping up and remain popped up. I am referring to the one which shows and entire month calendar, along with the time, day, etc. It would usually occur upon clicking on the time and date in the lower left hand corner. Whenever I click that to get rid of the expanded version, it shows up again a few seconds later as if I clicked on it.
View 3 Replies
Sep 7, 2015
my CD player keeps popping open ever since windows 10 install
View 4 Replies