DISM Ends With Error 0x800f081f
Aug 10, 2015After Installing Windows 10, I encountered some problems. So, I tried to fix with dism.exe, but in vain.
Here's my SFC log : [URL] ....
After Installing Windows 10, I encountered some problems. So, I tried to fix with dism.exe, but in vain.
Here's my SFC log : [URL] ....
I just upgraded to Win 10 from Win 7.
I get Error 0x800f081f when run DISM.exe and it states the source file can't be found. When I run SFC scannow I get nine files that can't be repaired.
I can't run the command "dism /online /cleanup-image /restorehealth". Every time returns the error 0x800f081f.
View 4 RepliesI recently updated to Windows 10 (from Windows 7) and I feel there is something wrong with the performance of my ASUS Zenbook.
I run DISM and I got the following error message:
1. DISM /Online /Cleanup-Image /RestoreHealthDISM /Online /Cleanup-Image /RestoreHealth
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
So I run the check again with an ISO image of Windows mounted in E, but I got the same error message.
2. C:WINDOWSsystem32>DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:E:SourcesInstall.wim:1 /LimitAccess
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Here is the log file [URL] ....
I had upgrade to windows 10 from windows 7. I'm having problems with my directories. I have ran sfc & dism several times, below are the latest log files.
1. sfc /scannow - found file corruption, log file attached.
2. dism /online /cleanup-image /restorehealth - get 0x800f081f error, log file attached.
3. SFCFix.exe - no error found, log file attached.
cbslog.txt 3.79MB
dismlog.txt 447.82KB
SFCFix.txt 926bytes
I was trying to fix a problem with my laptop after upgrading to Windows 10 which caused updates to fail. I went and looked at Microsoft support and tried using sfc and dism. Sfc /scannow found corrupt file but couldn't fix them.
Dism /online /cleanup-image /restorehealth and dism /online /cleanup-image /restorehealth /Source:esd:E:SourcesInstall.esd:1 /limitaccess both came up with the error 0x800F081F.
Another issue is that my computer won't shut off completely. The screen goes blank and the hard drive light is blank after the computer turns off, but the fan and the power button is still on.
Trying to fix this error I am getting it says the procedure called failed everytime i try to open my file explorer on windows 10 so i ran some of these cmd prompts that someone suggested an this is what it is telling me the source file cannot be found error 0x800f081f. here is the log file that cmd saved for me. I even did a computer reset that did not work the error came back again.
Attached Files : dism.log 214.54KB
I ran "SFC /scannow" and got an error saying the System File Checker found errors but couldn't fix them. Afterwards I ran "DISM /Online /Cleanup-Image /RestoreHealth" and DISM threw the error 0x800f081f saying that the source files could not be found.
I then ran "DISM /Online /Cleanup-Image /RestoreHealth /Source:H:Sourcesinstall.wim" to direct DISM to my windows 10 disk, but this also didn't work.
I don't know what to do short of reinstalling Windows, I've attached my CBS and DISM logs in a .zip file below (the CBS log was too big).
I've been trying to use DISM /Online /Cleanup-Image /Restorehealth on my Windows 10 Home, but it keeps telling me that it does not support servicing Windows PE with the /Online option. Of course I'm not running WinPE 10.
View 9 RepliesI just completed a clean install of Windows 10 Pro...all was going fine, but I wanted to run both scf and DISM...
If SFC was not able to repair some or all of the files there are a few options including a repair install from the OS dvd, and DISM (win 8 & UP)
DISM
If you are on win 8 and up you can (and should) run DISM if SFC found errors it could not fix
From an DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:elevated command prompt*
Type DISM /Online /Cleanup-Image /RestoreHealth . (please note the space after "dism", & "online" & "image")
If the repair is successful you may want to re-run SFC just to check.
[URL]
Have never had this issue before...but I can't seem to be able to direct DISM elevated command to a .iso file:
To run a system file check (SFC)
Go to start
Type CMD
Right click and run as Administrator
(called an elevated command prompt)
If you want to verify and repair the OS type sfc /scannow (note the space between sfc and "/")
If you just want to check (verify only) the OS type sfc /verifyonly (no changes will be made using verify only)
If you get the error message "cannot find source files"you need to have an ISO file mounted and need to specify where it is located with the below command
DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:* Where "X" is the drive letter where the ISO is located.* SourcesInstall.wim:1 /LimitAccessSimply change the "X" to the correct drive letter
If you do not have an ISO you can make one.* The instructions are here
*You may have to run this up to 3 times to fix all the problems
When you have finished it will say one of three things
Windows did not find any integrity violations (a good thing)
Windows Resource Protection found corrupt files and repaired them (a good thing)
Windows Resource Protection found corrupt files but was unable to fix some (or all) of them (not a good thing)* If you get this message run DISM as described below..
I also have the DISM log file which I would be more then happy to upload:
I have a dual boot with Windows 10 and Insider preview. Upon restart, on the boot menu there are 2 Windows 10.
I need to rename them so that I know which is which.
I was given a program called BCD, or something like that, and it worked for changing the names.
I have related issue. Every time Windows 10 forces a critical update. The computer ends up on the lock screen instead of finishing loading as it does on normal restart. It's a problem becuase the computer is remote location. So every time critical update happens. I blocked regular updates. can't connect then to drive 40 mins to slide the screen. I created task that reboot:s it nighly but that doesn't work as its not fully loaded.
View 3 RepliesI tried everything that can be found on the internet, i tried to download from microsoft website, no luck, tried the offline install with the win 10 installer, nothing worked.
View 9 RepliesIf I run SFC it tells me I have corrupt files that it can not fix. When I tried to use DISM checking health says the files can be repaired yet if I run DISM with /online feature with out a source it says the same thing if I run it with a source which is it can not find the files needed. I have attached the CBS log and DISM log below in
View 4 RepliesI have an issue with my sfc and dism, as stated above. The issue started when i went to add windows features i get nothing but a blank box. Thinking there was some kind of corrupted file I ran a sfc scan only to get this, Beginning system scan. This process will take some time.
View 1 RepliesI have a very old laptop, but despite the age it has worked relatively fine for my needs with just an HDD change. I bought this at the very end of Vista lifespan with an almost immediate Win7 upgrade offered. I then skipped Win 8 totally, but rolled a Win 10 when it came, and it has been working well. But you get the picture. This machine is old.
Onto the point: I'm getting an occasional fan rev up, with the CPU at 100%. The process is Service Host: Local System (Network Restricted). Recently, I also lost all sound on the computer, which chkdsk /f /r was able to salvage. I have a feeling these might relate to a same problem.
I researched, and found out that sfc /scannow will work. OK. It starts the verification process, but fails at 18% saying corrupt files exist. When I export the sfcdetails.txt from the log, it does not really report which files are corrupt so as to replace them. 00000e22 [SR] Beginning Verify and Repair transaction and then the logfile ends.
Because I cannot complete SFC, I'm told to run DISM, and that is how I ended up here. When I run Dism /Online /Cleanup-Image /RestoreHealth
Image version 10.0.10240.16384
At 20% an error 1726 with remote procedure call failed.
So I go to dowload the ISO and mount it. It will then give me the .esd
So I'm having my fingers crossed while running Dism /Online /Cleanup-Image /RestoreHealth /Source:esd:F:SourcesInstall.esd:1 /limitaccess
I have a Lenovo W530 laptop, that started with Windows 7 Pro, then got upgraded to Windows 8, then 8.1, and now 10 Pro.
I have the factory setup disks for only 7 and 8.
I ran DISM and it says the source files could not be found. From a similar problem several months ago, I sort of know how to work with DISM, but if it is looking for Windows 10 files, where would I point DISM ?
My next step is to use the log files, and attempt to find which files are corrupted.
I ran sfc/scannow (trying to diagnose a sleep problem) and it found irreparable files, and I ran it again in safe mode, and again, irreparable.
I ran dism and it couldn't access the source files. (Afterwards, I checked windows update, and it says that the computer is up to date, and the last check was at the time I ran dism!)
Is this behavior normal for windows 10 pro x64?
I have managed to create a USB pen drive to apply WIM images using the DISM Apply-image command in 64bit so I know it can be done but how to create a pen to apply 32bit WIM images
View 6 Repliesa few days ago my windows 10 crashed so I had to format and reinstall windows 7 then upgrade to windows 10, a hard work to do. So I started to search about how to capture the image of C: where the windows 10 is running and I found Dism. Now I have a lot of questions about it, let me start with the capture of C: as an image.wim.
1- Does dism Capture-Image works for windows 10?
I used the following comand to capture a image:
Code:
dism.exe /Capture-Image /ImageFile:D:Image_of_Windows_10.wim /CaptureDir:C: /Name:Windows_10 /compress fast
It generated a .WIM file with 16 Gb.
2- Is FAST option better than MAXIMUM? Or should I use NONE instead?
3- Now with the image of the c: stored in hard drive, if my windows 10 crashes, is this how I should recover it? applying the image file .WIM or should I format the partition first?
Code:
dism /Apply-Image /ImageFile:D:Image_of_Windows_10.wim /Index:1 /ApplyDir:C:
4- After using DISM to apply will windows 10 boot and work like a charm?
5- Do I have to configure the boot with BCDBOOT?
Code:
C:WindowsSystem32bcdboot C:Windows
Experienced plenty of issues with win 10 installations after upgrades from say WIN 7. The issues are just about all related to the disappearance of MS Edge and the Start Menu.
One should run the SFC /scannow command , followed by the more complicated DISM command and then finally the very complicated powershell command.
Almost no replies are made after one runs the SFC command and even the DISM command and no errors are found.
What should one conclude if the SFC command and the DSIM command report no errors? Secondly what is the best next step in trying to recover from the issue at hand?
Using the Dism command in Windows ADK for Windows 10 v1511, it is possible to change the name and description of a volume image saved to a wim file?
If not, you can tell me the method more proper to do this avoiding the use of the old imageX command?
W10 (64 bit Home) has been working OK on this laptop but recently I have been able to open the settings screen for only a micro-second. Having found people having the same problem I have tried running SFC several times, as suggested, but it says it found an issue it could not resolve.
Again following instructions on the forum I tried running DISM with an iso loaded and this hung at 40% for hours (overnight).
I do not understand what to look for in the log file, but there are several lines that mention an error. I attach the log file (zipped)....
Recently updated to windows 10 I've tried a scannow to resolve another issue and I get a failure message with files being corrupted. I've tried a reset keeping my files but where to look next. Attached is my log file from the SFC and the DISM log really stuck currently.
DISM
Error: 0x800f081f
The source files could not be found.
Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see Configure a Windows Repair Source.
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
Scannow
Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.Log windirLogsCBSCBS.log. For example C:WindowsLogsCBSCBS.log.
Note that logging is currently not supported in offline servicing scenarios.
I have been trying to fix my windows 10 corrupted files but I have been unabled to recover it. I tried every possible way of recovering using DISM commands, but to no avail. I tried also the sfc /scannow but as usual this command hardly ever fixes issues regarding corrupted files. I have tried using dism in several ways by specifying the location and the install.esd file from my usb flashdrive windows copy and even tried the health commands on powershell..still wont work. The first command I tried and for all of them I get the same error message, which looks like this:
C:WINDOWSsystem32>DISM.exe /Online /Cleanup-image /Restorehealth
Deployment Image Servicing and Management tool
Version: 10.0.10240.16384
Image Version: 10.0.10240.16384
[==========================100.0%==========================]
Error: 0x800f081f
The source files could not be found. Use the "Source" option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see [URL] .....
The DISM log file can be found at C:WINDOWSLogsDISMdism.log
I have heard people saying that I need to refresh my pc as a last solution and I don't want that since I have all my settings and programs migrated from the upgrade...
I have been reading on the web that there is a way of specifying the packages missing via command and then download them manually..
[URL]
DISM command line utility won't work. I get an error 87. AND how do I change my user name?
View 1 Replies