My laptop was recently broken beyond repair recently and I am looking to recover the data from the HD.
The laptop was an Acer Aspire S7-392 with a 256GB mSATA SSD by Kingston.
The operating system on the HD was Windows 10 (I upgraded from Windows 8.1 just before I broke the laptop).
I have removed the HD and put it in a mSATA to USB3 enclosure.
When I plugged the External enclosure with the hard drive into another PC running Windows 10 it said that the HD could not be recognised and offered me the option to format it.
This is where the extent of my knowledge runs out and I am at a loss with how to proceed with recovering my photos etc from the HD.
I used CLEAN in DISKPART and i delete all partitions of my only disk.
Now i dont have any OS on my laptop and i want recover partition by "Partition Wizard" or "Test Disk" that can boot from CD but i fear that this bootable program overwrite on my only disk to load itself and some part of my data will be lost.
Data Recovery ? I have a HDD which was used with Win10 and crashed . Boot sector went kaput, nothing to do with Win10. what do I need in terms of Hardware and Software to spin up this drive and recover data files or directories from this drive to an external device such as a thumb drive, DVD ,etc. ? Can I safely (safely) plug it into my working PC if there is provision for another HDD, slot and connector and try to access the drive etc. ?
When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
So I have a 120Gb SSD running Windows 7, and a 1Tb HDD with all my data such as programs and games. When Windows 10 is released, I want to be able to completely replace my Windows 7 with Windows 10, so basically just wipe the SSD and then install Windows 10 (or upgrade). My question, is will the data on my other hard drive just work like it does now?
Once I've upgraded to Windows 10, will it literally just still work? I don't want to have to reinstall all my programs, or start all my games again (the ones with locally installed data). Also, I do have a couple of programs stored on my SSD that would obviously need to be moved to my HDD to avoid being removed when I wipe it, so can I just move the whole install directory? Or is it more complicated?
What is the MapData folder which has recently appeared on my D drive? (This is the drive containing all my user folders with the exception of Pictures.) It contains subfolders diskcache, mapscache and files overrides.json, updater.nma
I have removed the hard drive and have in in a caddy, but the data files are not where I expect them to be. In the Users folder, all the folders (Documents, Desktop etc) are empty.
I want to prepare my desktop before selling it and wipe all personal data. I am aware of tools like DBAN which would wipe out the entire disk including Win 10. I would prefer not to do that.
On a related note - my desktop is HP - came with Windows 7 - has the disk partitioned to C: and Recovery Image D:. If I do wipe out the entire C: drive, how exactly will I be able to recover Win 7 from D: ? It won't boot, right?
IS hiding your Desktop app icons from Windows 7 along with pictures a hidden feature in 10? I have installed Windows 10 Pro thru my upgrade and all of my Desktop app icons and pictures/videos were all hidden. I just went into folder options and unhid everything. Wasn't sure if this was normal behavior after an upgrade?
The ProgramData folder is not displayed in Explorer. I can search for programs that currently exist in this directory but can't access it. how to proceed?
I was able to load Quicken 2009 on my Win10 sys and it seems to work but I can't migrate the data from my XP sys to my Win10 sys. I do a backup on the XP sys and try to restore it on the Win10 sys but it says the file is invalid.
I want to reinstall my windows 10 without losing all my data. Is there a program which can carry everything( including other programs) except the old os to the new install?
In Settings > Network & Internet > Data Usage : data usage is monitored this day to one month back , this is entirely useless since usually people try to monitor their usage since last bill , windows 8.1 allowed resetting of counter in any specific day so the counter can report useful data you can use , through researching and an earlier post I got the understanding that this is the new vision of Microsoft of how Data Usage should work..
Now the question , for sure Data usage must be using some registry key to constantly store data usage per day to achieve this trick of collecting data use over a month , so resetting should be as easy as deleting that key and allowing it rebuild from that point forward , so what is the path to that key or went the extra mile and did the reg file to delete it ?
How to disable Telemetry and Data Collection in Windows 10
Windows 10 now comes with the telemetry feature enabled by default which collects all sorts of user activity and sends it to Microsoft. Unfortunately, Microsoft has provided no way to disable it completely using the Settings app for Home and Pro editions of Windows 10. Only Enterprise users can turn it off. Here is a solution for editions other than Enterprise to disable Telemetry and Data Collection in Windows 10.
Read the full story at Winaero. How to disable Telemetry and Data Collection in Windows 10
Myself I went back to 8.1 which I only use rarely. My main OS is 7 Ultimate.
Somehow not sure if a update did it but cortana got turned off and so did my location stuff, so what the defaults are as i never played with it much, but want to reset it to default?
After suffering an HDD failure on my Lenovo Y500 Ideapad, I opted to replace the HDD with an SSD as the :C drive to run the OS and software applications and to install a new HDD in the ultrabay as the drive to hold all data. This was done at a shop which then did a clean install of Windows 10 onto the SSD for me.
All good so far, but the default pathway for data is still set to the SSD. I want to keep my data on the HDD and I don't want to drag and drop it from the SSD every time I need to save or import something; otherwise, I could just be using an external back-up drive. How do I set the default pathway for data (documents, music, photos, downloaded .pdfs, etc) to the HDD?
Seems like it should be straightforward but I'm a novice. Haven't found specific directions for this in Windows 10 and it looks to be somewhat different than those described for Windows 7. I want to make sure that downloaded applications and the like still go to the SSD. And I'm concerned about making changes that might mess up the registry.
Suddenly, the SSD/HDD configuration is seeming a little overly-complicated and maybe even out of date. Possibly I should have sprung for a bigger SSD and left it at that, but this is what I've got so I'd like to make it work.
I purchased a laptop a while ago and it came with windows 10 home. I'd like to upgrade to Windows 10 pro, but instead of paying for an upgrade in the windows store I'd rather use the unused copy of windows 7 ultimate that i already own since you get w10 pro when upgrading from w7 ultimate. All my data is on the C drive so how would I go about backing it up so I can restore it on the new OS? Also would I lose all the drivers and programs for the laptops features such as the webcam, keyboard backlight, etc?
