Delete Partitions On Hard Drive
Mar 23, 2016
I have been trying out virtual box and running Linux distros. The computer started malfunctioning after updating a Linux distro running in virtual box needing to do a factory reset to my computer but all good now.
I plan to dual my computer with Linux and Windows 10 but when checking in Disk Management I noticed I have 6 partitions on the hard drive.
My question is could I delete the 490mb 45 mb 7.92gb partitions ready before I install a Linux distro.
View 2 Replies
Similar Messages:
Jul 30, 2015
I want to upgrade to Windows 10, and unfortunatly, the only way for me to do so is by doing a fresh installations and deleting everything, wich I don't want to. I want to back-up my current data on a hard drive partition, if I do a fresh installation of Windows 10, will it delete my partition alongside my data inside it?
View 1 Replies
Dec 3, 2015
What partitions I should have on my hard drive after I upgrade from Windows 7 to Windows Home Premium Build 10586. I have some new small partitions and I don't know if they belong to the OS or they got allocated from another source.
View 1 Replies
Mar 14, 2016
I'm just doing some spring cleaning on my laptop and I noticed a couple of partitions on my hard drive. Well, I'm mostly curious about two. Both of them are about half full. Neither one has a drive letter, and one of them has this label: System. They're allocated but are labeled as unused partitions. What do these partitions do and how careful do I have to be with them? I need to move partitions around and such to merge with and extend my C drive.
The Windows Central Universal Application for Windows 10 Mobile on a Nokia Lumia 830
View 19 Replies
Dec 8, 2015
Something is causing my C-drive to completely run out of space. I did some investigation and found a folder under AppDataLocalPackages. The folder was called windows_ie_ac_001 and it is about 36Gbs. I deleted it. The strange thing is that after I restart my computer, you can literally watch my hard drive fill up back to the 36Gbs. The folder I deleted is back too and if you go to its properties, it's increasing in size so I know it's the culprit.
Doing some more investigation I found out this problem folder is for a stupid programmed called AVG Web Tuneup. I tried to delete the program in Uninstall/Install and it won't work.
Attached Files : Example.jpg 106.29KB
View 6 Replies
Jan 11, 2016
My DELL Latitude laptop came with Windows 8.1 Pro x64 on it. I decided that I want to upgrade it to Windows 10 Pro x64.Before I did anything I used DELL Backup and Recovery to create a flash drive so I can always restore the PC back to factory if anything goes wrong during the upgrade process.
After creating the recovery media I used the Windows 10 upgrade wizard to upgrade to Windows 10 carrying over all of my existing files. I primarily did this so my Windows 8.1 Product Key which is injected into the motherboard would officially become a Windows 10 Product Key.Now I would like to do a 100% clean install of Windows 10 through a bootable Windows 10 USB flash drive that I just got done creating but have a few questions:I booted from the flash drive and went to Custom (Advanced) install and I am currently viewing all of the partitions:
Drive 0 Partition 1: "ESP" type: (System)
Drive 0 Partition 2: "DIAGS" type: (OEM)
Drive 0 Partition 3: "" type: MSR (Reserved)
Drive 0 Partition 4: "WINRETOOLS" (Recovery)
Drive 0 Partition 5: "OS" type: (Primary)
Drive 0 Partition 6: "" type: (Recovery)
Drive 0 Partition 7: "PBR Image" (Recovery)
Which of these are DELL related and which of these are just the additional partitions Windows automatically installs?Can I just delete them all and fresh install Windows 10 on Unpartitioned space?Is there any that are non operating system related and might be worth keeping like the DIAGS one?Will my DELL Backup and Recovery media rely on any of these if I delete them and then try to use it later on?Is there any use for any single one these anymore now that I have backup recovery media and will be going to Windows 10?
View 4 Replies
Dec 21, 2015
I have windows 10 build 1511 on a USB stick made by windows media creation tool now when install windows the drive has zero partitions.
When i install the copy from the USB stick i end up with 3 partitions one is 450MB (recovery partition) and another partition at 100MB called (EFI System partition) and last partition is windows 10.
Now if i delete all the partitions and install windows 10 from the USB drive again i get two partitions one at 500MB called (System Reserved) and the windows 10 partition.
Why if i install windows 10 multiple times i get different partitions being made?
I would like it to only make the two partitions every time.
View 5 Replies
Feb 28, 2016
So I recently bought a ssd to add to my pc so that I could add my OS and some other files on to the ssd and keep my old hdd as storage. After finally getting the OS onto the ssd and being able to boot from it I tried to transfer all of the files back to the original hdd from the backup I had made from the ssd after cloning the drive. Once completed the hdd was no longer showing up at all in my computer so I went into disk management and tried to set a path for it, but it was now split into two partitions (I am assuming because I took the backed up ssd and put it onto a hdd because the size of one of the partitions is the size of the ssd). I tried formatting both partitions and then extending it to combine them but whenever I do this it tells me there is not enough space on the disk to complete the operation.
View 1 Replies
Dec 18, 2015
While inslating Win10 i my new computer i made two partitions on the SSD, but this is giving me some problems of space, so i want to merge the C: disk with the F: disk (the D: disk is a hdd), in the C: disk i have the IOS and some other apps and the F: is empty. How to do this?
View 1 Replies
Sep 1, 2015
I have attached an image of my Disk Management screen. Disk 0 doesn't look right to me. Is there a problem here? if there is, how do I correct this? I am running W10 and the C drive is a Samsung SSD drive.
View 9 Replies
Feb 23, 2016
I am trying to delete a folder on an external hard disk that was created on another computer. First it tells me that I need administrator permissions to modify it, which I grant. Then it tells me that I need permission from dougal obert to do so, dougal obert being my own user account on the machine I am using. I have given full control in the security settings both to administrators and myself, but nothing will enable me to delete this folder.
View 3 Replies
Mar 5, 2016
I have a Dell Venue 8 Pro with an upgraded Windows 10 installed. Always perform Windows Update but did not pay attention too closely. When the drive space was low and started looking a little bit closer, I found out that I have several Recovery Partitions. From Disk Management display, from left to right are the partitions:
500MB EFI | 40 MB OEM | 490 MB Recovery | C: OS 22.8 GB | 450 MB Recovery | 4.75 GB Recovery
The problem is I do not know which partition that Windows 10 actually created as its Recovery Partition. I do know that the 4.75 GB partition is my original Dell Venue 8 Pro Recovery Partition. Which one can I remove to allow the expansion of my C drive? What gives?
View 9 Replies
Oct 19, 2015
I recently used a 16GB USB flash drive to create an installer for a new Linux distro. I noticed that the created partition is 8GB and the rest 8GB is unused. I want to create a second NTFS partition so I can use the USB as a recording medium for my PVR, but Disk Management doesn't give me this option. I then used MiniTool Partition Wizard Home Edition, which did create the partition but warned that it won't be recognized by Windows as it normally sees only the first partition on a USB Flash drive. I even went back to Disk Management and assigned a drive letter to the second partition, but in Explorer I see only the EFI partition (first, drive is formatted in GPT mode) with that drive letter. Is there any workaround? Of course I could just format the whole drive as NTFS, but I wouldn't like to do so until I don't need the installer anymore.
View 9 Replies
Jan 14, 2016
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
View 2 Replies
Jan 9, 2016
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 Replies
Oct 27, 2015
I clean installed Win 10 RTM version on my laptop a few weeks ago. I have a basic GPT setup.
Installation went fine, however the installer created a 'Recovery' drive (D with a size of 600 MB (262 MB free) & a 'Local Disk' drive (E with a size of 451 MB (128 MB free).
I am stumped as to why it assigned letters to them. If you see the attachment of a snapshot of Partition Wizard, you will be able to see the setup.
My question, besides why the assigned letters is the where the status is listed as 'None'. Is it safe to delete these?? I am assuming that the only partitions i need to keep are the 'ESP', which is 'Active & Boot' - so it is needed to be able to boot into Windows. How about the one listed as 'Other' - the capacity is 128 MB & all 128 MB are used - do i save this one as well?
I really wanted a less cluttered setup - so when all these partitions were created, particularly 'D' & 'E', i was perplexed as to why they were created.
View 9 Replies
Jul 30, 2015
Ever since doing a fresh install of Windows 10, in "This PC", my secondary hard drive is not in the list. I have already tried right clicking "This PC" and clicking Manage -> Disk Management, but there is nothing there except my SSD with Windows 10 installed.
I have tried changing SATA cables, SATA ports, but it still does not appear in This PC. I have also tried installing my hard drive on a another computer to see if the files were corrupted. They were not, all files were still the same before the installation of Windows 10. I did not leave the hard drive plugged in during the installation.
In the BIOS, my computer recognizes both my SSD and my hard drive, but in This PC, it's still missing.
View 3 Replies
Sep 16, 2015
I can't delete any folders from my system drive C: Keep getting error code "1 interrupted action" Invalid MS-DOS function. I have gone in and checked all my security settings and I have full permissions for everything. I get this error code no matter which folder I try to delete. It's as all files are locked. Can't even drag and drop to the desktop to try removing them that way.
View 3 Replies
Jul 29, 2015
Stupid question probably, however I cannot find an answer online and I'm not the most tech savvy.
I bought a HP laptop around Christmas last year. The laptop came with a recovery partition, which I still to date haven't got around to getting a 32gb drive to back it up to.
I stupidly left W10 installing this morning when my upgrade was offered, but am worried now that the partition with my recovery may be deleted and I may no longer be able to get that onto a drive in case I ever need to re-install the laptop.
View 1 Replies
Aug 27, 2015
I have had windows 10 since the beta and I recently bought a kingston 120gb ssd I want to do this by reinstalling but since I got windows 10 during the beta with no install disk I have no ability to simply reinstall but how to transfer my license.
View 1 Replies
Feb 18, 2016
O/S-windows10 v1511 ... following the update to version 1511,I discovered .mui files and L10n files(.dlls) in my program folder. Can these files be deleted without causing problems or do they have to be transferred to the system32 folder ?
View 2 Replies
Aug 15, 2015
I have a Lenovo laptop with a non-upgradeable SSD. I have installed the update from Win 7-64 to Win 10. All of that went smoothly. But now I have a 25gb directory named "Old Windows" on my C drive. Can I safely delete that directory to reclaim that precious SSD space?
View 1 Replies
Oct 24, 2015
I have two hard drive on my PC, as SSD for the OS and a HDD for all my storage.I seem to have a problem with search, that it will only find stuff that is stored on the SDD.To get it to look for other files on the HD, I have to click search my stuff, and even then it still doesn't work.Is there a way to fix this? As most of my stuff is on HD and click search my stuff is a bit annoying.Also when I click rebuild index, nothing happens. I get a dialogue box saying it will take a long time, but then it doest say its indexing
View 3 Replies
Feb 10, 2016
My old computer was a windows 8 that was upgraded to windows 10. I just ordered a new i5 6600 which comes with windows 10, a 250G SSD and 1 TB hard drive.. My old hard drive appears to be a Seagate Barracuda 1TB SATA which seems to be the same as the one in my new Vanquish. My old hard drive is 2/3 full and is backed up often. My question is can I move this old hard drive to my new computer as a separate drive without formatting it and use the data on it (or transfer my data) or does it need to be formatted (thus giving me roughly 2 TB of space with the 1 TB provided with the computer). It was my C: drive in the old computer.
View 8 Replies
Jan 18, 2016
Is it possible to do a defragmentation on my PC's hard drive?
View 2 Replies
Oct 30, 2015
I have an HP G42-154CA that I'm trying to get Windows 10 Pro installed on.
[URL]
I ran into an issue with the installation disc not detecting the hard drive (ie, no hard drive is listed when the screen appears to select the hard drive to install Windows on).
I've tried various drivers (latest from HP and Intel website, OEM OS installation discs etc) with no luck.. at the very least, the Windows 7 driver from HP's website for that laptop should work for installing Windows 7- same results, does not detect hard drive.
At this point I'm wondering if maybe it's a BIOS setting that's causing this? I don't recall changing anything in the BIOS when I last installed Windows (which was v8), but it was awhile ago, so can't be certain.
View 10 Replies
