I used MicroTool partition manager to delete the extra partitions on an OS drive with win10 (leaving just the main C partition on the drive), and now the laptop will not recognize the SSD with the OS on it, and obviously cannot boot. I also tried using the bootable partition recovery tool from MicroTool, but restoring the partitions also does not work, it will only allow one of the two partitions to be restored.
View 9 RepliesWhen I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
View 9 RepliesSo, currently, we're trying to dual-boot Windows 10 Technical Preview on a Toshiba laptop with Windows 8.1. We already got the partitioning set up and everything, but when trying to install, it says we can't install to a GBT partition, or something along the lines of that.
We went to try to install it the same way that you do for Windows 7 and everything else, but upon setting the disk drive to the boot device, it still loaded into Windows 8. After a little Google work, I found that Secure Boot must be turned off, and that the BIOS option has to be changed from UEFI to CSM. After doing that, we could boot into the Windows 10 disk. However, when trying to install it, it says "Windows cannot be installed on this disk. The selected disk is of the GPT partition style"
We would like to fix it, and I found a way to do so on a Microsoft forum, and that's as follows:
1. Boot up to installation DVD/CD.
2. Click install but don't follow through.
3. Press SHIFT-F10 to bring up console.
4. Type "diskpart"
5. Once inside diskpart type:
-> list disk (find the one you want to convert)
-> select disk 0 (select the one you want from the list)
-> convert mbr (should take a second or two)
-> quit
6. Continue with install
But I need to know if it will format the entire hard drive, as I'd prefer not to lose the data on the primary partition. If we can do it while only formatting the partition for Windows 10, that would be fine (as that's empty already anyway).
I currently dual boot win10 and win7, first time I have ever done a dual boot, and I am wondering if there is any way to hide drives in explorer to clean it up. it shows the system reserved drive and the windows drive for my other OS on both systems and I just want to clean it up, having 7 drives listed just looks cluttered
View 1 RepliesI installed Win 10 Enterprise Tech next to my main play of Win 8.1 Pro w/ WMC in a simplistic Dual Boot by slpitting my Intel X-25M 160GB SSD into two equal Partitions, C and D. I do realize that W10 is gonna be a bit rough around the edges and I've noticed that I( have the same Wallpaper fixed to both Start Screens no matter what I do to indivualize them. It would seem as if both Partitions are linked together, perhaps because I'm using only one (1) SSD to split the Partitions apart. Certainly not a biggie, but it's gotta be one of the damndest things I've seen on my Dell inspiron 1545 in some time. My guess is that this is a simple glitch of some sort.
View 6 RepliesI recently updated from Win7 to Win10. Initially when updating I was encountering an error, which I resolved by splitting my SSD into 2 partitions using CMD (I found this information through other posts).
Now the SSD is in 2 partitions, one being the boot partition (C) and the other system partition (Y). Is it possible that these 2 partitions can be merged together?
I was messing around with partitions and created a test partition that was unfortunately the same size as my EFI partition. I went to delete my test partition, but deleted the EFI partition by mistake and now my computer won't start.
View 1 RepliesMy windows is not booting the m.2 ssd. I bought a new laptop with a hdd. Bought m.2 850 evo ssd and installed it.Installed windows 10 on it without removing the hdd. It was loading fine but i noticed that the boot loads the previous hdd before continuing to the ssd. Tried deleting the hdd from msconfig boot and that didnt work.
Still in the bios i only saw "windows boot manager HDD" under the uefi bbs boot priorities. But it recognized the ssd in storage information. All that and i even tried cleaning with diskpart the hdd ( the big mistake ).So i now got no boot manager now. And ssd is not loading. Is there a way to fix it without reinstalling windows ?
Okay, so the other week i received a new Clevo P650SE laptop. The laptop only had a 500GB 7200RPM HDD with Windows 10 to begin with, so yesterday i added my Samsung 840 EVO SSD. As i wanted this to now be the primary drive, i made another new installation of Windows onto here. After doing this, the system now displayed a boot selection at startup with the choice between the new Windows 10 installation on my SSD or the old one on the HDD.
As i no longer wanted to use the HDD for running Windows, i decided it would be best to delete Windows from this drive. So i booted onto an Ubuntu USB and wiped the entire drive of it's data in GParted, which included three different partitions. This seemed perfectly fine to me at the time, because i had a the new installation from the SSD showing up in the boot manager.
However, when i rebooted the machine and attempted to boot into the new installation on the SSD, it gives me this message:
"The boot configuration data from your PC is missing or contains errors.
File: /EFI/Microsoft/Boot/BC Error code: 0xc000000f"
I have tried everything to recover the system but nothing has worked. Startup repair from my Windows USB doesn't do anything, the system reset wouldn't operate because it stated that the partition was locked.
Nothing with the Command Prompt is working, I have done 'bootrec /fixmbr', 'bootrec /fixboot' and 'bootrec /rebuildbcd', but the last command returns the following error:
"The requested system drive cannot be found."
I also did 'bcdboot C:/Windows' but that also refused to work. I assumed the reason for this might be because the drive didn't have a letter, but when i attempted to add a letter is says:
"The specified drive letter is not free to be assigned."
Both drives in my laptop have now been completely wiped and converted to MBR, but even with the two drives empty the original message still appears when booting my Windows USB in UEFI.
I have only had this laptop a couple of weeks and it's already completely messed up. I can boot the Windows USB in Legacy and install Windows as normal, but of course i'm looking to have it back on UEFI as it was before.
I just upgraded to Win10. I am using the computer as a HTPC and need the PC to boot up automatically each day so it can runs some scripts. I have been doing this by enabling the computer to automatically boot up within the UEFI . This no longer works after the Win 10 upgrade.
View 3 RepliesI have just installed the free windows 10 upgrade from Windows 7 home premium. I have used the file history program to create a USB and a DVD recovery disk prior to creating a system image ( not done yet ) I tried to test the recovery but it does not boot the system. The system just continues to boot the Win 10 update. I have changed the boot order by using advanced options to get into the bios. I have put USB key in position 1 and USB cd/dvd in position 2. my System is a Samsung lap top RC530 with Legacy Bios. How can I check my recovery disks USB and DVD. The system just continues to boot as normal. The recovery disks completed ok with no error messages when creating.
when I press esc after pressing the power button all I see is the choice of the 2 internal devices CD/DVD and HDD.
I have set all my usb devices in boot order above these two but the USB is shown as NA.
I am using 64 GB USB 3.0 drive. Note though my computer only has USB 2 ports no USB 3.
I have also used Media Creation tool to create a Windows 10 installation media. It still failed to recognise the drive as a boot device. The Lap top can read the USB drive ok though just not boot from it.
I have a HP Pavilion g6 laptop that was factory supplied with Windows 8 and uses UEFI. I have now done a clean install of Windows 10 - 1511. If I create a System Repair Disk (CD) the laptop will boot from it, and in the boot menu it shows as UEFI. If I create a Recovery Drive (USB) the laptop won't enter the boot menu, and so can't boot from it, but my non UEFI desktop will boot from it. If I use Macrium Reflect to create a recovery USB drive the laptop will boot from that OK. So it seems that Windows is creating the wrong type of drive.
View 4 RepliesI have 4 partitions.
1 => System Reserved
2 => Win 10
3 => Win 8.1
4 => Storage
When I try to boot into the win 8.1 it gives me an error. Even after restoring the win 8.1. partition from a Macrium image.
What gives? Two days ago I decided I wanted to shrink the win 8.1 partition.
I made a macrium image of my Win 10 partition (because I'm not crazy) and I already had a macrium image of win 8.1. I started shrinking the 8.1 and the computer went unresponsive so I rebooted. I used EASEUS Partition Manager.
I found out later that the reason the computer halted was because the version of EASEUS I used was outdated.
I attempted to boot into 8.1 and was greeted with the error. (Will update this post presently with the picture.)
I updated EASEUS and successfully shrunk the 8.1 partition. I took that unallocated space and enlarged the WIN 10 partition. Still unable to boot into 8.1.
Used macrium to overwrite the 8.1 partition.
Computer refused to boot completely. No Win 10 or Win 8.
Macrium restored the Win 10 partition, and the Win 8.1 partition. Discovered something interesting. Macrium restored the partitions as if I had never shrunk the 8.1 partition and enlarged the Win 10 partition. Is it supposed to do that?
Still unable to boot into Win 8.
I created a dual boot system quite some time ago and all was well until.RTM partition was completely up-to-date. I had recently updated to Windows 10 Build 10251 on the Insider partition.I turned the machine off on Sunday January 31, left town, and returned Saturday February 6. All was well with the dual boot when I turned the system off before leaving. When I turned the system on last night, it booted directly into the Insider Partition. There seems to be no option to boot into the RTM partition.
View 9 RepliesI just upgraded to win10. at boot up, my raxco instant recovery app is supposed to initiate a progress bar that gives you 10 seconds to click f1 in case you are having a problem, and you can retreat to a different snapshot. The progress bar isn't materializing. How I can correct this. I didn't have this problem in win7.
View 4 RepliesI purchased a Dell Inspiron 15 7000 with a 120GB SSD and a 1TB hard disk. I have the OS on the SSD (C:) together with the programs. So far I have installed Office 365 and little else. I have moved the data directories from C:Users to the D: drive.
The laptop came with no CDs or OS disks and Dell tell me none are available so I have created a recovery USB disk. At the end of that process it informed me that I could now delete any recovery partitions on the boot drive to create extra disk space. On trying this the option failed "Unable to delete partition". The reason for doing this is to recover the drive space used by 3 of the 5 partitions on the SSD. They take up over 32GB of the 120GB I bought. I've never needed to use a recovery partition and would have no issue with having to do a full install from CD or USB in future.
Disk Management does not have a "Delete partition" option for any of the SSD partitions. Would a re-install from the recovery USB stick allow me to delete all partitions on the SSD before re-installing or would they just get created again?
Anyway, today I had to repartition a drive. So, I went into disk management and here is what I found:
My main system drive has 3 recovery partitions! This is after an in-place upgrade, refresh, and then reset.
After finishing the installation of the Threshold 2 update 10586.3, I seem to have grown an additional Recovery Partition.
How many of these do I need?
Will the excess one be deleted along with Windows.old after thirty days (or if I run Cleanmgr earlier)?
after performing an upgrade, I have 2 recovery partitions, the same size, one at the beginning of the disk and the new one at the end of the disk
I only need one, right?
Two ideas came to mind:
1 boot into linux, copy the contents of the second partition to the first partition, and then delete the second partition.
2 use EaseUs partition master to delete the first partition and then move the second partition to its place.
I have a Dell Venue 8 Pro with an upgraded Windows 10 installed. Always perform Windows Update but did not pay attention too closely. When the drive space was low and started looking a little bit closer, I found out that I have several Recovery Partitions. From Disk Management display, from left to right are the partitions:
500MB EFI | 40 MB OEM | 490 MB Recovery | C: OS 22.8 GB | 450 MB Recovery | 4.75 GB Recovery
The problem is I do not know which partition that Windows 10 actually created as its Recovery Partition. I do know that the 4.75 GB partition is my original Dell Venue 8 Pro Recovery Partition. Which one can I remove to allow the expansion of my C drive? What gives?
I have upgraded to Windows 10 a few months earlier from Windows 8.1, I have not checked my HDD arrangement after the upgrade. Now I can see that there are two partitions the "system reserved" and "recovery". Where these partitions came from? and Can I get red of them?
View 5 RepliesI have an HP laptop that shipped with Windows 8.1. I upgraded to Windows 10 weeks ago and tonight I accidentally reformatted my D: drive recovery partition.
I have recovery media on a USB pen drive that I made back when I first set up my computer.
Has Windows 10 changed the D: recovery partition during the upgrade or will it be the exact same image the computer shipped with?
how I can get the recovery files back on the D: partition?
I am running File Explorer in Windows 10 and it displays some files and folders In a portable (F) that I cannot delete. When I try it says "This is no longer located in F:. I have hit F5 to refresh, rebooted and even ran defrag to eliminate this problem. It does show a file size for the files located in these folders. I have also installed LockHunter software to delete these folders and files; it didn't work. It says "no processes locking this file have been found", and "Cannot delete file..." I have another program called Directory Lister that also finds these files. I also have tried accessing them using C Prompt, which will display the folders and files but cannot be used to delete them.
View 6 RepliesI read that a clean install rebuilds partitions and makes a recovery partition.
My question is does it allow you to pick the size of the partition that Windows 10 is installed to ?
I have a 1 terabyte drive but like to install in a 100gig partition.
I think I will delete the existing partitions before I start
I accidentally deleted google as my search engine from windows 10 no longer available for selection ..
View 1 Replies