I DO NOT have two OS's installed just one.
However after installing it says that both my HDD and SSD are both system, boot, hibernate.
I can not format or delete my HDD it says that it can not do so because the empty, blank HDD is a "Healthy, hibernate, boot, system drive"
How do I go about deleting this.
I just upgraded my laptop from windows 8 to win 10. The free upgrade of course did not delete my files from window 8 so I went ahead and installed windows 10 on to my USB and booted from it for a clean install. While installing win 10 however I managed to do it on my C drive. I believe my previous OS was on D drive as when I go into my system properties now, C drive = 373 GB free from 393 GB which has the windows icon over it to show that OS is inside it and the 'D' drive has only 43 GB free from 393 GB capacity.
I would like to free up my D drive and delete all previous files and maybe also remove partition and only have one storage which is C drive. How to do it? Do I just go into my D drive and delete all the files inside it? such program files x86 etc? while running window 8 I managed to get a lot of spyware, adware etc on my system and hence why I preferred a clean install of windows 10.
while trying to troubleshoot a lousy 1.5TB WD drive I had accidentally deleted and recreated the partition on a different USB drive without noticing.What are my options? I don't have a spare drive to restore to. The drive was only using 350GB of 900gb, but it has been filled and erased several times without defragmenting. I have it unplugged now.
It's not entirely a disaster; aside from my (dubiously obtained) movie collection there's nothing really that I need and can't redownload or have on my SSD.
So when I built my pc I didn't get an ssd, now I got one since windows 10 is out and I want to install the upgrade on an ssd, how could i go about putting the os on the ssd without deleting all of my files on my terabyte hdd?
View 1 RepliesAnyway, a while ago, I was playing with booting installations from a HDD, which worked, but now it seems I'm stuck with the partition I used to store the installation on.
So I have two questions:
1. To delete the H partition, I need to first set the C one to active, correct?
2. Is it even safe to delete the partition since it's a "system" partition?
The H partition is empty as far as general files go, but since it's bootale, it always shows up as a boot option, which is mildly annoying.
Image: [URL] ....
A file named customrefresh.wim remains on my C: drive. 9 Gb big. I believe it is a leftover from windows 8.1. I suspect the folder was created by windows 8.1 in connection with creating a USB recovery drive for the 8.1 system. I should have erased it then, but forgot. Can I do it now?
View 5 RepliesI have a fat32 100mb system partition in my windows disk management it's also showing in aomei partition assistant file system fat32, capacity 100mb, used space 28.75 mb free space 71.25 mb flag is gpt,efi status is system. Installed windows 10 from a usb flash drive and I could not convert from efi to gpt or something like that so I deleted the windows partition which is my c drive (ssd) and that's when I got this showing up in windows.
Can I copy the boot files to the c drive and just deleted this system partition and use the partition software to merge the space back to the c drive so I can use it. Or do I have to reformat and start all over again? I deleted the c drive partition that windows was on and created a new one and it created reserved space and recovery space which I have got ride of and deleted and merged the unallocated space for both back to the c drive.
I hesitate about doing anything with this partition until I'm sure of what I'm doing so that My computer will still boot up. I can only boot into windows 10 from the windows boot manager and not straight from the cdrive the primary (SSD).
Installed a Samsung SSD on my Asus CM6730-06 desktop running Win7. the Win7 OS was cloned from the Asus Pc to Samsung SSD. Windows 7 runs great off the SSD. Got a Windows 10 upgrade notice and received an automatic download of Win10 but when it tries to install I get the message "Windows 10 couldn't be installed". "We couldn't update the system reserved partition". I would like to upgrade to Win10 on this pc.
View 9 RepliesI have an SSD with WIN7 installed. It has no System Reserved Partition (SRP) and thus no boot files on that nonexistent partition.
I've read here that individuals with a SRP of only 100mb have had issues installing WIN 10 and that those issues were resolved by expanding the SRP from 100mb to 450mb.
Will WIN 10 install if I have no SRP? Will it merely alter the boot files on my C drive?
I know about increasing the partition size but i dont know where it is on my pre-built pc. I do have a 128mb partition but i cant increase the size on my third party manager
Disk management. URL...
I'm trying to update from 8.1 64-bit to 10 on my i7 24GB Toshiba laptop. I keep getting the message "Windows 10 couldn't be installed. We couldn't update the system reserved partition."
The very first try "failed" with an error Code C1900200. After that, every installation attempt shows "canceled" w/ an error Code 8024000B.
Note: "DISK 1" is my primary (boot) disk; "DISK 0" is my data disk. Both disks are 256Gb SSD drives. Other info is in my System Specs.
I do not see a "reserved partition" on Disk 1; could this be the problem? I'd rather not do a clean install, in order to keep existing programs/settings etc., but will do so if necessary.
Installed a Samsung SSD on my Asus CM6730-06 desktop running Win7. the Win7 OS was migrated from the Asus Pc to Samsung SSD. Windows 7 boots and runs great off the Samsung SSD. Got a Windows 10 upgrade notice and received an automatic download of Win10 but when it tries to install I get the message "Windows 10 couldn't be installed". "We couldn't update the system reserved partition". A friend used Aomei to create a System Reserved partition but Win10 still gives the same message about the system reserved partition.
View 2 RepliesHow do I create a system reserved partition on my SSD C: drive. I have 3 other drives installed and all have reserved system partitions.
View 5 RepliesEvery time I try to update and install windows 10 I get this error. It seems as if my reserve partition is too small to download windows 10. How would I go about fixing this issue. I have had a dual boot of linux in the past but got rid of it months ago.
View 6 RepliesWhen I try to upgrade my Dell XPS 15 running Win 8.1 to Win 10 I get a message "we couldn't update the system reserved partition", I only have an EFI system partition, not the 100MB DATA partition I've read about.
I've attached my disk management layout.
Win Ten boot Loader
Under 10240 I do believe it was 505Mb
Under 10586.29 mine is 430Mb
I really wanted to upgrade to windows 10 but I get an error saying that my system reserve partition could not be updated. Ive looked on tens and hundreds of threads and forums and they say to increase the partition size from 100 to 350. Except i dont have a system reserve at 100mb. This is my disk management. URL...
View 1 RepliesI just installed a Samsung Evo 850 SSD and then installed Windows 10 to it. I was previously duel booting Win10 and Win7 as I didn't want to fully commit to Win10 until I had some time with it. I decided I like it enough to have it as my sole OS so when I got my new SSD I've formatted the two old drives containing Win10 and Win7 and just did a clean install of Win10 on the new SSD.
After the installation I wanted to join the two old drives together using storage space because I have also ordered a 4TB HDD and wanted to consolidate my other ones into one drive. It was when i did this I noticed that the system reserve folder was still on the old drive and no matter what I do I can't deactivate it or delete the partition.
So how to remove the partition from that drive.
The problem is when i installed my OS the reserved partition of OS automatically get created in different drive. I want to remove that drive(Drive 0) from my pc but without reserved partition im unable to boot my OS.
i want to remove the 750HDD(Disk 0) drive and want a make a reserved partition on my Disk 2. So i can boot my OS without Disk 0.
I created a dual boot system quite some time ago and all was well until.RTM partition was completely up-to-date. I had recently updated to Windows 10 Build 10251 on the Insider partition.I turned the machine off on Sunday January 31, left town, and returned Saturday February 6. All was well with the dual boot when I turned the system off before leaving. When I turned the system on last night, it booted directly into the Insider Partition. There seems to be no option to boot into the RTM partition.
View 9 RepliesI am having Dual Boot PC XP and Windows 10 on different hard disk. Windows 10 have been upgraded from Windows 7 but the System Reserved Partition on Windows 10 remained 100 MB ( 30 MB is free space ), wherein if we clean install the Windows 10 then System Reserved Partition is 350 MB. Now the problem, if I create a backup then the minimum 50 MB free space is required in System Reserved Partition otherwise backup fails. I tried command fsutil usn deletejournal which was advised by someone but it increase the free size from 20 MB to 30 MB only. I am hesitant to use partition manager software because once I have used this on another PC on a simple partition and though it has increased the size of the partition but data of my other partition was deleted.
View 9 RepliesI am trying to make space on an empty partition as a temp backup before I install a fresh copy of 8.1 to upgrade to 10.
I'm using Mini Tools Partition Wizard 9 Free Edition. What I have looking at the partitions are, a C partition (700 gigs capacity), then a System Reserved partition (350 mb's) then a F drive with 100 gigs of unallocated space. Here is an illustration.
Disk 1 - { [700 gig C] [System Reserved] [100 gig F] }
I want to shrink my C drive by 100 gigs and then resize my 100 gig F partition so I will have 200 gigs of usable space for the backup - But I can't because somehow my System Reserved Partition is on the right side of the C partition between the C and the F. Normally this system reserved partition is on the left of the C partition.
I do not know how this partition got moved. I did have another partition set up after the C drive that I used to install the Win 10 preview on but I since have deleted that partition and edited the boot menu to reflect this in MsConfig. Perhaps Win 10 moved my System Reserved partition over?
Am trying to upgrade a windows 7 desktop to windows 10 but anytime I try to download windows 10 I get this:
"Windows 10 couldn't be installed. We couldn't update the system reserved partition."
What can I do get this fixed to get windows 10 on this computer?
I currently have one drive that contains a System Reserved partition (which includes the boot files). The status is System, Active, Primary Partition.I have another drive with the C: partition. The status is Boot, Page File, Active, Crash Dump, Primary Partition.I've been told that if I remove the disk (it's a bit flaky) with the System Reserved partition, I won't be able to boot up. If this is true, is it possible to transfer that partition to another drive? If so, does it have to be at the start of the drive? Alternatively, can I make the C: partition include System status?
View 7 RepliesI have a drive that I want to use as a backup drive for a Windows 10 machine. The problem is the old drive has a boot partition on it that is making Windows 10 go nuts every time I plug it in. If I wait until after the machine boots and then plug it in via USB adapter then I can get to the files but I want to install it inside the machine permanently.A photo of the Disk Manager is below. How do I (or should I) remove that EFI System Partition? The Disk Manager won't let me do it.
View 3 RepliesThis is the 2nd system (my wife's computer) we want to run Windows 10. Currently that system is running windows 7 Pro. The first system system went without a single hitch and it was running windows 7 Pro as well.. The download was complete so I was ready for the upgrade. I started the installation and the first thing I got the comment "We couldn't update The System Reserve Partition". I cannot find any documentation on this message.
View 3 Replies
