Desktop Begins To Start Flashing To Black And Continuous Loop
Aug 7, 2015
About a minute after starting up, my desktop begins to start flashing to black and coming back in a continuous loop. The file explorer, however is completely unaffected. Using Google I have found that this occurred back in the technical previews of Windows 10 as well, but a new update from Windows fixed the issue. I can not get the explorer stable long enough to even check Windows Update. I have also run sfc /scannow and it said the integrity of my system is fine.
View 4 Replies
Similar Messages:
Aug 6, 2015
I installed windows 10 from 8.1 on my Vision E2 Gateway. When I sign in, the desktop keeps flashing a black screen every second. It doesn't allow me to open anything, I can't click on any icons visible, and this has been happening ever since I first signed in with windows 10. Is it a virus or something? It can't be that my computer isn't compatible, because it TOLD me it WAS.
View 1 Replies
Dec 1, 2015
So I have a bit of a problem where my screen flashes, I instantly thought it was display drivers so I uninstalled them only to worsen the problem, the computer restarted with a black screen which later turned into a desktop screen with no icons and a flashing screen (can't click anything or even load up the start menu with the windows key). I put it into safe mode but it does the same thing. Nothing works except task manager and i can't run task from it or it will exit out, system restore doesn't fix the issue either. Computer is a lenovo k450 i5-4440 8gb ram 1tb hdd with an evga gtx 760.
View 1 Replies
Sep 22, 2015
I know it's in Windows, because it appears in all three browsers(Firefox,Chrome, and Edge) and in Word, Open Office, etc. It's an ad, but Ad Block Plus, Ad-Aware won't remove it. It just shows up as a band about 4-6" across the bottom of the screen. I can type over it, but it blocks most of what's in back. It basically says Series 5, Hyper Real Engine with a Samsung logo inside. How can I get rid of it? It comes on, stays on for about 15 seconds, disappears for around 15 seconds and the continuous loop never stops. I've tried everything, including anti-virus programs, turning my PC on and off, but no success.
View 2 Replies
Nov 24, 2015
Blue screen and error 0xc000021a and the continuous repair loop
DESKTOP-9LUS32E-Mon_11_23_2015_225843_17.zip
systeminfo.txt
View 9 Replies
Nov 1, 2015
Earlier this afternoon I decided to reset Windows 10 as I had a problem with BSOD BAD_POOL_CALLING over and over again. I booted in Safe Mode, went to Advanced Options and so on. It wasn't a factory-new reset, just the one that removes all files, app data, etc. I left it for a while and came back to find it hadn't worked; there was an error message that read 'There was a problem whilst restarting your PC'. I tried again and the error message appeared again. Because of this, I decided to exit and continue to Windows 10 and see if it had done anything.
Now, when I try to boot my PC up, the circle that usually rotates on the 'Zoostorm' screen when loading doesn't appear. The PC then reboots and tries again, again and again, but with no success. I have tried turning off and on, and even unplugging everything, however nothing seems to work. My PC is now stuck in a continuous reboot loop and won't load. Unfortunately, I can't press F8 or Shift + F8 when booting to start Safe Mode. I have never made a recovery drive for Windows 10 and I don't think my computer came with a repair disk.
View 9 Replies
Oct 15, 2015
Today, I finally went through with the free Windows 10 upgrade. After the upgrade concluded, my laptop worked fine for about an hour, after which time it crashed to the new and improved Windows 10 BSOD, informing me that they would restart my computer for me. The problem is that, after the initial ACER screen, in which I can press F2 to enter setup, a Windows Automatic Repair screen comes up, and shortly thereafter, crashes right back to the BSOD. It will do this 5 or 6 times before giving up and staying shut down. I cannot press F8 or Shift+F8 to enter safe mode at any point.
Now, when I press F2 to enter the set up screen, I am given the following 5 screens, in order:
As far as I can tell, with an admitted lack of expertise, there does not appear to be any way for me to access the BIOS to at least get to safe mode, and perhaps go back to a restore point.
View 1 Replies
Jun 19, 2015
I chose the "fast" ring update on the windows insider app in order to get the preview for windows 10 on my lumia 1520. It updated fine but since the migrating data process began, it has been stuck in a continuous reboot loop. The screen shows the nokia logo and the windows logo briefly, then shows the at&t logo (since I bought the phone in the US) with "not for resale" written in the bottom left corner. How can I fix this? I don't mind losing all my data.
View 3 Replies
Jan 28, 2016
Yesterday i had noramal updates and since then i cannot play utube videos just a black screen with continuous buffering no sound nothing.
View 1 Replies
Oct 7, 2015
Today when I started my computer I logged in and after than I get a black screen with my cursor and desk bar flickering and can't do anything. When I press ctrl all delete and go to task manager it says nothing is running. I can't click anywhere or do anything except start up the task manager..
View 1 Replies
Jul 31, 2015
I have an Acer Aspire 5830TG-6642 Laptop, i upgraded to windows 10 last night and upon opening my laptop today and resuming i cannot proceed past a black screen with a flashing underscore in the top left corner.
View 1 Replies
Sep 13, 2015
This is weird. I rebooted and the windows logo showed up but then it went to a flashing black and white screen. I rebooted a few times and the same thing.
Then I tried F8 while booting (thinking that would get me to safe mode) and it booted fine. BUT, it didn't look like it went to safe mode (not sure if it is obvious in Win10 since I haven't booted to safe mode yet). I rebooted a few more times and all OK.
View 1 Replies
Aug 8, 2015
I have downloaded and successful installed Windows 10 on one of my two computers. When I downloaded to second computer it hung on the installation re-boot. Now machine will only display BIOS splash screen and then shows a black screen with a single fast flashing cursor.
I tried putting the original Windows 7 install disk in the DVD but could not boot that way either. I can not get in contact with Windows support in Australia and have not been able to find an email address.
View 17 Replies
Oct 18, 2015
PC froze and wouldn't ctrl-alt-del, so I turned it off from the power supply, and when I turned it back on, I get a black screen with flashing cursor just after the BIOS splash and just before the Windows symbol would normally appear. I've used a recovery usb - refresh, automatic repair, and system restore do not work, and I can't continue booting with the usb, can't get to safe mode.
I had a spare SSD, so installed 8.1 on it and used it to boot the PC, then attached the drive that wouldn't boot as a secondary drive. All of my files/programs appear to be there on the faulty drive, but for whatever reason the Windows 10 installed on it will not boot.
I'm sure the easiest option would be to wipe the trouble drive and reinstall Windows, but there are several work programs that would be a pain to go back and reinstall (would have to call in the vendor). Since the drive itself seems to be working, could I create a new partition and reinstall Windows to it, then uninstall the corrupted version?
View 12 Replies
Oct 13, 2015
Recently I've started to encounter an error when booting my computer, occasionally it would boot to a weird flashing white and black screen. An example of this can be seen here: [URL]....
This occurs just before the login screen. While this happens, my cursor is still visible, though larger than normal. After a while, the flashing stops and the screen stays black, usually before this I would force restart my PC then it would boot fine.
General specs:
GPU: Asus gtx 980 strix
CPU: i5 4690k
Motherboard: Gigabyte Gaming 7
Ram: G.Skill Trident 2x8gb
PSU: Thermaltake Gold 650watt
View 1 Replies
Nov 12, 2015
When I turn on my laptop, it shows a black screen with non-flashing dash on top left after Lenovo logo. I did the clean install but it didn't work. After that,I tried to clean install Windows 10 on my old HDD and it works! Why my SSD isn't work?
P.S. It can enter the BIOS menu
View 1 Replies
Aug 24, 2015
I upgraded to Win 10 on Friday, and since, despite several resetting PC attempts, Win 10 will not load to the login screen. Instead, it is stuck on a loop flashing between the lock screen and a gray loading screen quickly back to the lock screen -- instead of loading to the login screen. This only happens when I attempt to restart or update my PC. If I go to the lock screen because I locked my PC or it fell asleep, I can unlock it. I have also attempted to reset my PC to the previous build, to no avail. I have no restore points.
View 1 Replies
Aug 8, 2015
What does it mean when you see a black screen that has a grey flashing dash located at the top left-hand corner of the screen? It moves down a bit before finally moving onto the Windows 10 logo, where it sometimes gets stuck and reboots (and the grey dash screen appears again before moving on).
I noticed this issue both during upgrade (when it failed and tried to recover the installation) and after installation. This issue occurred on an Acer Aspire Z5801. It does not occur on Windows 7.
View 2 Replies
Aug 8, 2015
I'm unable to do anything. During the download, everything seemed fine. It started to install apps. It then said "This is taking longer then usual, it should finish soon". I stepped out for about 10 minutes, came back and desktop was flashing with no icons. I'm unable to do anything.
View 9 Replies
Aug 6, 2015
I just installed windows 10. No problems installing or logging on. However, after logging on, the desktop keeps flashing and I cant click on any icons. The only thing I can do is use CTRL + ALT + DEL.
I've noticed similar posts saying the same thing that they have NORTON INTERNET Security installed which I have.
View 13 Replies
Oct 22, 2015
I installed windows 10 and it seems great, except every now and again it restarts out of nowhere. Then it will go into this loop of restarts with this screen I've captured and then restart again. Today the computer was in sleep mode and I started using it for 10 minutes then bam, black screen of death restart loop. It will show these white boxes at the top of the black screen then restart again. I have a photo but I don't see how to upload here.
View 5 Replies
Jul 31, 2015
I just updated to Windows 10 from Windows 7, and now my computer starts flashing out of no where. The taskbar and the desktop starts flashing. When this happens I can not do anything. When it stops, I can not use the start button.
View 3 Replies
Feb 19, 2016
Just installed Windows 10 from Windows 7. Get a black screen without cursor after sign in. When boot up in safe mode, I get a WDF violation and automatic restart whenever I attempt to go to a recovery point or any other option. This creates an loop that I can't break. I am able to access my web browser (chrome) and Excel by pressing control/alt/delete and using the new file feature on the Task Manager.
View 1 Replies
Dec 16, 2015
builded 2 weeks ago my PC but having problems of BSOD or Black Screen with Sound Loop (no signal).
OS: Win 10 pro x64
CPU: i5 6500 3.2ghz
MOBO: Asus H170m-PLUS
RAM: Corsair 1x8GB DDR4 2133MHz (before 2x4)
GPU: Sapphire r9 380 4gb NITRO
SSD: Samsung 850 EVO 250GB
[code]....
Here it's my log. The last BSOD i had was KERNEL_SECURITY_CHECK_FAILURE after putting the 1x 4gb in the B2 ram module.Before i used the pc all the day without problems except 2 times i had a Black Screen with Sound Loop while Playing.I tested the last week an HD 5700 and i hadn't Black Screen but i had Blue Screens, now testing again the HD5700.
View 9 Replies
Sep 13, 2015
I have tried changing the boot order and using a disc and a USB drive to get Windows to reinstall but it isn't working.
View 1 Replies
Aug 6, 2015
I've seen lots of people posting about this all over the internet but as of yet not found a clear fix to my problem. I registered for the upgrade a while ago and the 'check' said that my system was fine. It's a HP TouchSmart 520 and is 2 to 3 years old.Today I got the message saying that I could do the upgrade and all seemed to go well, no errors throughout the installation. However, as soon as one of the users logs on the desktop just flashes and you can't access anything other than ctrl-alt-del and the task manager.
I've tried booting into safe mode and trying a windows update (boots in safe mode with no flashing) but it finds nothing, and I've looked on the HP website to see if there is a W10 driver. It gives you a file to download which should check for drivers but that doesn't run in safe mode so a non-starter. And if I use the HP website it basically says that you need to use the windows update; which just sits there doing nothing.
If I go into device manager and try to do an update it says that the graphics driver is up to date. I am a bit hacked off that the HP website suggests that it's a product that's not been tested with W10, but the Microsoft check said all ok.
View 1 Replies
