Display On Main Monitor Was Out Of Bounds (1920x1080)
Aug 12, 2015
Today I upgraded to windows 10, and the first thing I noticed was that the display on my main monitor was out of bounds(1920x1080 btw). I know the task-bar and icons on the desktop are there, but they aren't in the frame of the monitor. My other display is flawless, but the main one isn't. I turned down the refresh rate from 60 to 30 on the main monitor, and that let me see everything on my desktop, however, there is a flicker when I go over stuff. Also, I feel that there is somewhat of an input lag with the mouse.
View 1 Replies
Similar Messages:
Aug 10, 2015
So recently I upgraded to windows 10 at the same time I got a 4k display.When I set the display scaling to 150% on my main 4k monitor and ensuring that the scaling stays at 100% on my other two 1080p monitors, the entire chrome application is blurry when viewing on the 1080 monitors, and I cannot seem to fix this. Other applications seem to be okay.
Furthermore after the scaling change, some icons on my 1080 monitor's desktop get larger, as if some scaling is applied to them. Is there any solution to this? At the moment I have had to set the scaling back to 100% on my main monitor in order to use chrome on the smaller monitors.
View 1 Replies
Sep 23, 2015
I am running Windows 10
MSI R9 390 GPU
AMD Catalyst version 15.7.1
Main monitor is CrossOver QHD270 via Dual Link DVI
Second display is a Vizio TV via HDMI/DisplayPort
So I was messing around with a 3 display setup for the first time today, one monitor (DVI) and two TVs (one HDMI, one DisplayPort). Everything worked okay, and I could unplug one TV, but when I unplugged the second TV, my monitor went to a black screen. As soon as I plugged the TV back in, the monitor started working again. The main monitor I use every day is now completely dependent on a TV I occasionally use as a second display to be plugged in to function. When I turn on the computer with just the monitor plugged in, I can see the BIOS load up, and the first Windows 10 logo, but as soon as the password screen should be shown, the screen goes black. I tried uninstalling my graphics drivers. When the drivers were completely uninstalled, the monitor functioned normally, but as soon at AMD Catalyst Control Center was reinstalled, it went black until the TV was plugged back in. I've tried plugging the TV up through HDMI and DisplayPort, it makes no difference. Also, my monitor is listed as the main display in both CCC and Windows 10 display settings. Every once in a while when I unplug the TV, the Monitor will get darker and slowly fade to black instead of going straight to black.
View 1 Replies
Aug 8, 2015
I have my TV connected to HDMI and a small, old monitor connected to VGA on a Radeon 4600 video card. I have Kodi (multimedia player) set to open full screen when the default user account logs in and it does so on the main monitor which is my TV. I have the smaller, older monitor set up so I can still use the computer when someone is watching a movie on the TV. I have multi-monitor set to extend the desktop.
But my problem is when I open a program it wants to default to opening on the main monitor and when I open a program from the second monitor, it opens behind Kodi on the main monitor (and I have to click and drag it over to the second monitor) - so I would like to switch the old VGA monitor to be the main monitor and the TV to be the second.
Is there a way I can force Kodi to open and stay on the second monitor once I make my TV the second monitor?
View 5 Replies
Sep 7, 2015
I have a acer Z5600 and use an acer AL1916W as an additional monitor which worked fine with Windows 7, since I upgraded to windows 10 my second monitor does not work and my main screen just goes black.
View 3 Replies
Sep 10, 2015
I am currently running windows10 on a HP tablet. I have it in a docking station, which has a second larger screen attached.
Last night set it up, perfect movie playing on external, able to browse ect on tab. Removed it today, re-docked, no display (blank screen) on external. Reset duel settings, making tab the primary screen.
Now neither screen shows a display, both blank.
View 3 Replies
Aug 16, 2015
I have a two monitor set up, with my main monitor being a 27" screen and a second 22" touchscreen as a secondary monitor.
I can only get the touchscreen monitor to pick up touches if I make it my main monitor. As soon as I switch my main monitor back to my 27" monitor touches to the touchscreen monitor appear on 27" monitor.
View 3 Replies
Aug 4, 2015
Using the same settings and programs as in my 8.1 installation. Nothing funny, or game-related running in the background (also tried disabling everything possible). The problem is that the monitor will not turn off, either from the Power/Display power-off options (nothing happens after set time passes), or with a program like ScreenOff and Monitor Off.
Using one of these apps, will start turning the monitor off, but it will turn itself back on automatically almost immediately. Something is interfering but I cannot figure out what. No security software installed (using Defender, tried disabling it). The only way this works as intended, is in Safe Mode.
View 9 Replies
Sep 1, 2015
I upgraded my Windows 8.1 computer to 10 over a month ago. Although I like Windows 10 a lot, there is a problem I've been having with the monitor not turning off automatically.
The display is set to turn off after 5 minutes of inactivity, but it never does. No matter how long I set the wait time. I set up a hot key to automatically turn the monitor off. It worked in 8.1 but in Windows 10 the monitor turns off for a half second and then turns right back on.
I did not change any hardware settings when I went from 8.1 to 10. I've tried unplugging various things connected via USB but nothing so far has solved this problem.
The monitor I have is the Dell E2414Hx 24-Inch Screen LED-Lit Monitor.
View 11 Replies
Aug 16, 2015
I have a Toshiba laptop running Windows 10. My main display monitor is a LG 24 widescreen plugged into the laptop.
With Windows 7, I had no problems in using Fn key f5 to set the display to only the LG (showing as "CRT" on the screen). This did not change when I re-booted the laptop.
With windows 10, it reverts back to to the default setting and I get the laptop screen and the monitor lit up.. I frequently get a different resolution on the display too, until I open the laptop and re-set the display with the Fn key. This is annoying, as I use an external keyboard (which doesn't flip the Fn key) with the laptop lip down.
I've also tried via Control Panel (Display) but that doesn't hold the setting either.
View 3 Replies
Aug 9, 2015
For the last 2 months since I got my new PC, I have been using my TV as a monitor for my PC. I had a few issues with resolution due to my TV overscanning the display but I used the resize feature in the NVidia control panel. However, yesterday when I downloaded Windows 10, it installed fine but when my computer opened up again it was trying to use my TV's native resolution which was a problem because of the overscanning. So I went to the NVidia control panel, and when I clicked the resize button (before choosing the new resolution) the TV just said it was receiving no input. Whenever I then tried booting my PC, it would display to my TV until Windows had loaded, then it would say no input.
The same thing happened when I connected to the TV through my motherboard rather than my GPU. So I spent ages trying to get it to work and eventually connected it to an old monitor. However the monitor only has a DVI input slot, which my GPU doesn't have, so I had to connect it through my motherboard and it worked fine. I then uninstalled all NVidia stuff from my computer, including the gpu from my device manager, and manually installed the new GTX 970 windows 10 driver from their website.
When this was done, I connected my graphics card to the tv through the HDMI, keeping the computer connected to the monitor through the motherboard. Both displays then worked as a dual display setup. However, even now whenever I try booting up my PC with only my gpu connected to the TV the same thing happens that was happening before and the TV will only display through the GPU when the motherboard is also connected to the monitor. I have ordered a DVI to HDMI cable so I can attach my monitor directly to the GPU, which will hopefully work, and then I will stop using my TV, but I would rather fix this problem and carry on using the TV until I can buy a better monitor.
View 1 Replies
Dec 20, 2015
I have three PC's all running the same OS setup but one no matter what I try after 2 minutes the display goes blank, move the mouse and the desktop is there! I found in link but for Windows 7 with the term called "System unattended sleep timeout" added to Advanced Power Settings" but cant find anything like this in Windows 10. And I do not know even if this feature is part of Windows 10 it could be something totally different.
View 5 Replies
Aug 19, 2015
Now have two 1" black bars on monitor. Am not a computer wizard - just switch and use ...
View 2 Replies
Jul 30, 2015
I have just recently upgraded to Windows 10 and I haven't found a way to set my resolution to 1920x1080.
View 1 Replies
Aug 10, 2015
Since upgrading from Windows 7 x64 to Windows 10, my monitor/display on my desktop will no longer go to sleep/turn off after the scheduled 5 minutes. I had no issues with this in Windows 7. I have updated the BIOS, video drivers, USB wireless mouse driver and anything that could be related and no change. All i want is for the monitor to turn off after the set time. I don't use a screensaver. There is no driver update for the monitor (Viewsonic VX2450). I've also tried uninstalling the monitor driving and reinstalling but no change. Seems like the system also will not sleep when set to sleep.
View 3 Replies
Dec 3, 2015
I just upgraded from Windows 7 to Windows 10 and now my computer only detects one display rather than two. I have a Dell desktop computer and two Dell monitors. Using Windows 7 both monitors were being detected/used. How to correct. The second display shows a black screen with the message "Cannot Display This Video Mode".
View 6 Replies
Nov 22, 2015
I've been running a multi-monitor setup for a while now, with an ASUS VG248QE 144Hz monitor as my main, and one or more spare monitors as secondary displays. I've set the ASUS monitor to 144Hz without issue in the past, while the other monitors stay at 60Hz.
The other night, Windows wanted to update. I figured it was the usual patch session, so I let it do its thing. However, after restarting my computer, I noticed that my ASUS monitor would only operate at 144Hz if it was the only monitor plugged into the system. When I try to set it higher in the Nvidia control panel, it just reverts back to 60Hz after applying changes. I updated my graphics drivers (though I was only one version behind) and even sought a special ASUS driver for the monitor to resolve the issue, but nothing has worked.
Did Windows recently add a forced refresh rate sync between all monitors recently? If so, that really sucks because I only own one 144Hz monitor.
View 9 Replies
Nov 27, 2015
I installed Windows 10 and found some apps did not fit the monitor screen (too big). I went in and changed the monitor resolution to a larger size (windows recommended 1920 x 1080) but I tried something larger, and now the monitor has a black screen with a little box moving around which says "input not supported". Not being able to use that monitor to go in and change it back, I hooked up a flat screen t.v. which worked but Windows only showed the current monitor size (which was smaller than the original monitor.
I tried the monitor on another computer I have also running Windows 10 and it worked fine. It shows the resolution as 1920 x 1080. When I plugged it back into the original computer I get the same plack screen with "input not supported" so I can't change it there. I suspect the issue is with the registry somewhere in Windows 10 on the first computer, but what the problem is. I've been working on this for a whole day now. You can probably tell I'm not well versed in computer technology. I just want my old monitor back (Acer K272HL) and I promise I won't mess around with it again.
View 6 Replies
Feb 10, 2016
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
View 3 Replies
Aug 14, 2015
I just installed Windows 10. Now my laptop monitor won't work - only the external monitor. I go to Graphic setting and click on multiple displays, but it states it doesn't see another device only the external monitor. Tried disconnecting the external monitor and rebooting, but the laptop display still doesn't turn on.
View 1 Replies
Jul 31, 2015
I was a Windows 8.1 user and I just can't get it through me that there is no button to go to desktop. When I alt-tab it only shows applications i have running I tried to enable all-desktops in the mutli-tasking option in settings.
View 6 Replies
Aug 21, 2015
what's making it not pop up im trying all the ways to get it to open, i tried:
* regedit in run(win+r)
* registry.exe in cmd with admin rights
* clicking on the main .exe located in the windows folder
View 9 Replies
Aug 12, 2015
I wanted to make an image of my machine since upgrading to Windows 10 and saw it kept on including my secondary drive (which has over 600 gigs of movies). I am not able to uncheck it.
I figured what the hell and disconnected the drive.My box will not boot without the drive!
I just built this machine back in December and I used a 500GB SSD for my main drive, while I have 2 regular HDD's for storage and movies.
I turned off, "hide protected operating system files" and found the folders "Boot, Recovery, System Volume information and $Recycle Bin" all showing up!
how this drive got dragged into the install, but I certainly do not want my main drive depending on it to boot.
I don't want to change ownership of the files and delete then manually either since I have a strong feeling it will kill my system.
how to go about "unlinking" these 2 drives?
View 9 Replies
Dec 16, 2015
How can I rebuild the main icon set for Windows. The music folder icon is broken and not showing properly.
View 5 Replies
Dec 13, 2015
Now that I have purchased a Surface device I would like to transfer my laptop to my spouse. However, when my laptop turns on the only choice I have to sign in is my own account. How do I transfer main ownership to her such that when the laptop comes on it is her name that comes up?
View 6 Replies
Aug 29, 2015
I recently did the free upgrade from Windows 8.1 to Windows 10 on my desktop. Everything went smoothly, except for the fact that Autoplay doesn't want to work anymore. I can get it to come up with the notification in the Action Center when I plugged a USB device in, but clicking the actual device name just gets rid of it from the list, and nothing else happens.
The weird thing is that this only happens in my main profile on my PC. I created a new profile recently (in addition to my main one), and Autoplay works flawlessly there. Is there some setting that got messed up for me during the upgrade?
View 1 Replies
