Doesn't Recognize WD My Passport External Drive
Aug 6, 2015
After receiving the W10 download, I installed a WD My Passport backup external drive. I made a system image backup and system repair disc of W7, and I backed up other files, and uninstalled & reinstalled BitDefender Total Security 2015. At first it seemed to run well or adequately, although slowly, notwithstanding that I had cleaned everything.
Then I discovered a message/warning from W10 that I should check the settings & do a backup, enable File History, that no usable drive was found, and to use an external drive for File History, and to connect a drive or use a network connection.
I googled all these issues to find answers/solutions: I checked in Device Manager, Computer Management, System Configuration. I was able to see that WD My Passport was displayed as running properly, with "healthy" status, with 866 GB of free space, and I could see it listed as in drive .
I think that I do not know "how to connect a drive or use a network connection." I clicked on "add network location, it opened to select a folder, I selected several, but none were acceptable, so I had to leave it the way it was, Network Location (1) My Media: Lizzie-PC.
View 8 Replies
Similar Messages:
Dec 20, 2015
Recently I purchased a Logitech h151 headset which has only one single jack, as my ASUS laptop has only one jack used for a headset. However, upon connecting the headset, although the sound plays through it perfectly and without issue, the microphone doesn't seem to work.
I've tried multiple solutions - I went to the Realtek Audio Manager to try and find advanced options, as I read that a possible fix to this is to go there and select an option to separate all input jacks. However, I cannot seem to find advanced options anywhere. I have also entered the Sound section in the control panel, and under the microphone section my external microphone was not detected, even after showing all disabled devices.
As for the Realtek Audio Manager issue, I read of several solutions to make advanced options pop up - from updating the driver to completely uninstalling it and such. As you can probably understand, I would rather not result to such things as messing with the drivers, as I am not a tech-savvy person and will not be able to claw out of a technical hole should I get into one.
EDIT: I forgot to mention, the internal mic is being used and can be detected (of course).
View 5 Replies
Dec 12, 2015
Early on in the Windows 10 update process, I was able to upgrade an HP Stream 7 and a Stream 11 to Windows 10. Both had the same 32GB RAM and nominal 32GB eMMC as the Stream 14 I am wrestling with. Both came to a point where they told me the device had insufficient space on its C: drive. In both instances I selected an external Micro SD drive, and off it went with the upgrade.
In this instance I cannot get past that point. I select the external drive (a 320GB external USB spinner) but it doesn't accept that or any other external device I offer it.
When I click "Refresh" it says that it needs 10GB on C: drive, and eventually says that the upgrade failed.
The computer has been wiped, and reset to factory spec for W8.1 with all updates installed. It has ~20GB on C, and 7GB in another partition, so even if I find a way to remove the partition it wont be enough.
I'm about to have to give up on this thing and just make the poor user run with W8.1 until further notice, how to get past this point.
View 1 Replies
Nov 28, 2015
I just received my MSI laptop with Windows 10 and I'm still feeling around on how to use the new OS (upgraded from Windows 7). I plugged in my ext. HDD and something popped up asking something along the lines of "What do you want to do with this?". I was like "Okay, everything's going fine so far."
The problem came when I wanted to eject my HDD though. I couldn't find the icon in the little notifications area with the arrow. I couldn't eject the HDD from "This PC" either. In the end, I just unplugged it, since there wasn't anything too important on it.
I've tried enabling "Quick Removal" in the device manager, but that checkbox doesn't even show up. Instead, it's replaced with the "Write-caching policy" options. I've also tried turning the notifications on in the taskbar, but that doesn't work either. I turned on task manager, safely eject..., and location, but none of them show up. I've restarted my computer as well.
View 7 Replies
Nov 27, 2015
I ran Windows 8.1 on my desktop machine a few months ago, and later upgraded to Windows 10. Everything worked great at that time, but since have replaced Windows with Linux. Now I'm trying to install Windows again, with the same 8.1 disk that I used for my earlier installation, and my ethernet connection isn't found. (this is a direct wired ethernet, not wireless) I've installed with a local user account, dug into every networking utility in Windows, but whatever I do the internet goes undetected. I've run the ethernet thru different routers, and even circumvented the router all-together, but no luck. Has my 8.1 disk "expired"?
View 3 Replies
Jan 2, 2016
Okay, so I input my USB drive; it doesn't detect any data and wants to reformat it, I decide to go ahead with it, but it simply says "windows can't format device E:". It does the same thing with my MSI drivers disk..
View 1 Replies
Oct 7, 2015
FILE name form shows up as (changed from real file name) = FIL#####,CHK Adobe Reader will not read it.
View 5 Replies
Feb 13, 2016
I'm having trouble to get picture on my main and only monitor when booting up. The green led indicator on the monitor is just flashing.
Usually I have to push the restart button 10-15 times until picture finally appears. Sometime I am able to log on in the dark. Hit space and logon, then do a win+p until picture appears.
I've tried to uninstall the drivers, but that didn't solve it. I had to use a different monitor to get in for the first time after that. Driver is the most recent one.
View 2 Replies
Aug 18, 2015
When i go to disk management all i see is NTFS file system , my SSD no longer shows , is this normal ?
View 9 Replies
Aug 9, 2015
My computer with Windows 10 no longer recognizes my Hero 3+ GoPro Camera, nor my Nikon D5100. I have looked for drivers, but to no avail. Any way that I can pull pictures/video off these devices and put on computer?
View 13 Replies
Oct 31, 2015
I got a new Samsung SM951 M.2 PCI drive. I have a X99 motherboard but it didn't have the M.2 slot so I purchased an adapter to attach the drive and installed it into an open PCI slot.
When I first installed it and boot up under the current Windows 10, I could see the drive through Disk Management.
I disconnected the current Windows 10 version, put in the disk, booted up and selected the drive to perform a clean install. The initial copy and prepare for installation worked fine, then it needed to reboot and that's when I got the message:
Internal hard drive not found
No bootable devices
When I reconnected the old hard drive and booted up, I could see the install files on the new drive, but it just won't boot to it.
So, what do I need to do to get the PC to recognize this drive as bootable?
View 3 Replies
Feb 16, 2016
I recently bought a new laptop with Windows 10. My previous laptop had Windows 7 and worked very well with my Brother MFC-J475DW Wireless Printer. I tried installing the driver for the printer from the original disk that came with the printer on the W10 laptop several times and kept getting a message that there is no printer. I went to the Brother website and downloaded the latest version of the driver and still get the same message. After some research I tried for the "built in" drivers, but with no success.
View 5 Replies
Aug 28, 2015
What I do know is that before I upgraded to Windows 10, there was always a box under (what is now) the heading "This PC". If I connected anything to the computer via a USB cable the computer would automatically recognize it and I would be able to transfer files.
Basically, I have a USB cable that I am using to connect my Samsung Galaxy S4 to my computer, an Acer Aspire. When I plug them into each other nothing happens. There is no pop-up window on my computer that even registers that the device is connected. I've tried multiple times to click the "This PC" button to see if the phone is connected, but it actually seems to be reading other devices around me and asking if I want to connect to them.
I would have used Cortana to ask, but unfortunately I'm having a serious problem with the fact that every single little thing I want to do from the desktop (you know, all the cool new apps or whatnot) requires me to sign into my microsoft account. Unfortunately for me, I created my account so long ago that the verification email they send your forgotten password to I have actually been locked out of because I don't know the password for that, and cannot have the security code sent to my phone since they have a very old number.
View 4 Replies
Aug 19, 2015
My laptop does not want to recognise the sound card/audio driver that are built into it. The fun part is this just happened. Audio played yesterday, and the time before that, and even before the upgrade. The only thing that has changed (or at least is the biggest change i can think of) is downloading and installing Cygwin (sans audio packages). In trying to play a song on the new microsoft Groove, i get this;
Further inspection in the playback devices, the only two options are the Speakers/Headphones and communications Headphones, the former of which i can only assume is my actual computer speakers (otherwise its completely gone!).Looking at the device manager, everything seems okay. All the drivers are up to date so im not sure what could be wrong there?
Its Windows 10 pro (upgraded from Win7 Pro) and the computer is a Dell Precision M4600. (I am pretty sure the audio driver is in the device manager image).
View 1 Replies
Apr 14, 2016
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
View 9 Replies
Jan 9, 2016
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 Replies
Dec 4, 2015
Since I have installed windows 10 I am unable to use the DVD/CD drive on my computer.
View 8 Replies
Feb 10, 2016
i have windows 10 installed and generally like it. and the only thing holding me back from using edge, is there is no extensions for it. But the problem i have is that it runs fine, but suddenly it will no longer recognize the hard drive, and even startup diagnostics cant fix it. then ill have to stick the windows 10 usb in and boot that way and once im up and running using that method, i can pull the usb and windows 10 will boot normally to my hard drive.
View 3 Replies
Dec 15, 2015
I'm having an issue with my system where, while my G430 USB headset is plugged into 1 of the 3(2x2.0 and 1x3.0) USB ports on the front of my case the other 2.0 USB doesn't not seem to work or rather Windows 10 PRO won't recognize my USB key(I've used tried multiple USB keys already). I hate having to disconnect my headset every damn time I'm sitting here waiting for a file to be copied onto my USB!
System:
- WINDOWS 10 PRO
- R1 ZALMAN (PC case)
- MAXIMUS VII RANGER (Motherboard)
- I7 4770K (CPU)
- KELVIN S24 FRACTAL DESIGN (CPU COOLER)
- ASUS R9 270X DirectCU2 TOP 2GB (GPU)
...etc.
View 1 Replies
Sep 27, 2015
Ever since the transition to windows 10 the dvd drive will not recognize,read or view any disc i put in, it says please insert a disc into drive E:. However my brothers laptop can view,recognize and read the disc.
View 9 Replies
Nov 21, 2015
After installing Windows 10 (I had 7 before), my computer does not recognize the D: Drive at all.
I have a Lenovo H410 Desktop (Lenovo Windows 7PC).
My scans show that all my drivers are updated, but there does not seem to be a driver for the disc drive.
Is that what I am missing? If so, where I obtain it? I have tried the Lennovo website, but am having some trouble getting to the drivers.
View 2 Replies
Mar 5, 2016
Can I install Windows 10 using an external DVD Drive on a new PC build?
View 3 Replies
Aug 19, 2015
All drive in explorer appear as "Local Drive".. I want to rename them "Drive_A", "SOFTWARE", "PHOTOS", etc. but can't.. Is there a way?
View 3 Replies
Feb 25, 2016
Ok, I bought a 2tb Seagate external drive which I swapped in my ps4, and took the 500 gig drive out of the ps4 to use as my external drive for my laptop.
But, my problem is, is that when I put in the usb cord to connect my external hard drive to my laptop, it lights up, but it doesn't show up anywhere on my laptop. I've done the disc management, and nothing is showing up as well.
My laptop is an HP Pavilion g, came with windows 7 64bit, but did that upgrade for windows 10 64 bit. Why it wont show up on my laptop.
View 6 Replies
Oct 19, 2015
I have an external hard drive connected to my W10 PC. Sometimes when I boot (not all the time) I get an error message that the recycle bin is corrupted because the drive is showing as one of the drives that utilizes the recycle bin. It then asks me if I want to empty the recycle bin, which I do. I then go in and change the recycle bin properties to NOT include that drive path.
View 1 Replies
Jun 30, 2015
I have installed the latest build 10158 and have the same problem that I have had in previous builds,i.e. that my external drive is not showing despite being listed in Device Manager as installed and working correctly,have tried disabling re-enabling,uninstalling etc.etc. with no effect.
View 3 Replies
