Dolby System Equalizer Settings - Bad Sound
Sep 18, 2015
Few weeks ago i got Brand new Windows 10 Installed on my Pc and i had Dolby Sound System installed together with my laptop on windows 7 and after i upgraded i noticed that sound got very weak and so i tried to find that dolby system equalizer and i coudnt find it just a buttom to turn it on and off. It was so much better on Windows 7 because i had possibilities to manage all sound settings and everything how i wanted, but now i can only turn it on and off. So i wondered is there any program that can raise the sound or give some sort of boost because listening to music now its just terrible.
View 1 Replies
Similar Messages:
Nov 18, 2015
my on-board sound chip does not seem to include an equalizer. I used to have realtek, but not anymore. On this new PC I have a mobo from Asus called B150M-K-D3, it seems to have an intel sound chip without graphic equalizer.
I am looking for a simple equalizer with presets. The APO equalizer on soundforge does not have such a thing, as far as I can tell.
View 1 Replies
Aug 11, 2015
I lost access to the equalizer after win 7 install. Now I have installed windows 10. Is there a way to get the equalizer back. realtek sound board. It worked great when I had XP installed.
View 1 Replies
Aug 1, 2015
Just upgraded to win 10 but cant find how to get windows to bitstream dolby sounds to my amp? media player classic still works fine and the amp shows dolby digital or dts ma etc when playing suitable films. but the amp only shows pcm when using windows media player, even the dolby demo for edge only shows pcm. Same issue with the netflix app, only pcm when dolby + soundtrack is selected?
View 3 Replies
Aug 16, 2015
I did a clean install to Windows 10, because upgrading it break the WiFi connectivity.
Now I got another issue, I noticed that the Audio Driver downloaded from Windows Update is somehow didn't sound good, if I enabled Dolby the bass is drastically reduced like no bass at all. I tried with headset and a small sound system, they both sound like a laptop speaker. The old driver couldn't be installed, the installer always failed.
I tried to use the same driver for windows 10 from another lenovo product with no different. It is not a big deal because I'm using a USB Headset. What matter is when I use a sound system to play music/movie the sound really bad. The solution for now is to disable Dolby but the sound is really low. I would like to know is there is a way to install the old driver to Windows 10 at least?
My sound card is Conexant SmartAudio other spec can be found in Sytem Spec and the installed driver version is 8.66.4.0.
View 3 Replies
Aug 1, 2015
I have an Acer Aspire M5 581-T ultrabook which is integrated with dolby home theater. it was working perfectly fine. But after my upgrade to WIn 10, it is not working properly. Dolby profile selector is not visible in the notofications area no matter how much I enable it in the settings and when i manually open the app from control panel it doesnt work(not turning on or off). It only works from properties tab within speakers. when its working, the profile selector doesnt work and changing the profiles and equalizer makes no difference( doesnt work). what can i do to make it work?
View 1 Replies
Aug 7, 2015
I have Windows 10 set to no sounds. I selected a timer app that was included, it works fine, and there's no sound when the time is up. How do I turn on sound for just one program?
View 1 Replies
Oct 22, 2015
No matter what I do the volume setting is always lowered at startup. I hope there's a setting somewhere that I'm missing. Could it be a Realtek setting/problem?
View 1 Replies
Mar 26, 2016
My default configuration is powered speakers connected via the optical output on the ZXR. So in control panel, the S/PDIF is my default device. I'd like to be able to also switch to headphones without having to change control panel sound settings. Is there a configuration that enables me to do this? It seems as if I can't have the s/pdif output my default if I want to use headphones. I'm on Windows 10 with latest software updates.I switched to using the analog outs from the ZXR and not taking advantage of the D/A converters built into my powered speakers (Vanatoo). Not the optimal situation, but it allows me to switch from speakers to headphones without having to go through Control Panel gyrations.
View 1 Replies
Aug 1, 2015
Navigating to Settings > Personalization > Themes > Theme Settings, we get to the Personalization window for Themes same as on Win 7. In the window it states "Click a theme to change the desktop background, color, and sounds all at once."
However, the icons normally at the bottom of the window to change those settings are missing. All I can do is save the theme (right click).
(window capture missing icons)
(these are the icons I'd expect to see)
View 6 Replies
Oct 29, 2015
All was good when we first uploaded windows 10 but suddenly all sound has failed although system says the devices are working. Also the CD / DVD had stopped working whilst again the system tells me all is fine.
Can a recent windows update have caused this?
View 2 Replies
Oct 9, 2015
For some unknown reason, the system icon for sound no longer displays on my task bar. I went into Properties, Notification area 'Customize', Turn System Icons On or Off, see that the Volume is turned off, but it's greyed out and I can't turn it on. I can't figure out how to activate this switch so I can flip it on.
View 9 Replies
Aug 2, 2015
I have just upgraded my system from Windows 7 to Windows10 I no longer have sound. Where is it? do I need to re-install?
View 1 Replies
Feb 14, 2016
So today my mic suddenly stopped working. It no longer picks up my voice, but instead if I log on to Skype, Mumble or other voice communication services I constantly transmit any sound currently going through my PC, be that music, youtube videos, game sounds or anything else.I've checked that my mic is set to the correct default device and I've even tried uninstalling and reinstalling all sound related drivers.
The problem came out of the blue. It was fine yesterday and then today when I booted up and logged on to Skype to talk to a friend he couldn't hear anything until I started playing some music which he said he could hear as if he was playing it himself. So it's not just the mic picking up sounds from my headset (which wouldn't make sense anyway since it won't pickup my voice). I then tried to do a Skype test call with some music running in the background and as I expected the playback was the part of the song that had been running during the test call. So basically as stated my computer is suddenly transmitting sounds as if they are being given as input through the mic and no longer registers any outside sounds like my voice, or any background noise in the room etc through the mic.I also know it isn't the mic itself that is the problem as I tried hooking it up to my laptop and it worked perfectly fine there.
View 2 Replies
Sep 6, 2015
Last evening as I was on my system like normal; all the sudden I got a popping sound and my system shut off. I then tried to turn it back on and it won't power back on even though I can see power is getting to the system board because there is a power and reset button on the board that are lit up. I just let it rest over night and tried again just now but it still will not power on. Does this sound like a power supply issue?
View 9 Replies
Mar 20, 2015
After the last update on windows 10, sound dont work on my computer... No sound in programs, videos, music or system. Sounds works just in Chrome.
View 6 Replies
Nov 19, 2015
I've just clean-installed windows 10 here, then updated everything possible. Now when I try to open the following system settings, nothing happens:
Apps & Features
Storage
Offline maps
Windows is digitally activated and scannow found no errors.
I've seen no one at all with similar problem, except that "settings wont open" issue which has been fixed.
View 9 Replies
Jan 28, 2016
I have just received updates for Windows 10, nd now when I boot up, I get a message, a copy of which I have attached to this post. This is after I sign in.
It matters not how many times I reboot, this message pops up each time.
View 2 Replies
Dec 17, 2015
I have gone into settings in my Windows 10 and changed the default music player from groove music to windows media player. But when I click on music files, it automatically starts playing in Groove and NOT windows media player. I have restarted Windows several times with the same results.
View 2 Replies
Aug 31, 2015
After restoring my computer back two days using System Restore, I noticed in PC Settings>Personalization>Start>Choose which folders appear on Start, that all the options are greyed out except "Settings". I was wondering if there was a way to fix this? I already tried SFC /Scannow and DISM.exe /Online /Cleanup-Image /RestoreHealth, but neither fixed the problem.
View 4 Replies
Nov 9, 2015
My settings app keeps freezing, but only when I select System > Apps & features and System > Storage, at least as far as I am aware of.
I am running build 10586, but already had this problem in build 10571, the first one I had as an Insider for PC.
View 1 Replies
Jan 10, 2016
I'm seeing System Settings Broker "stopped working" in the reliability history. Additionally, I'm seeing a lot of issues with the Windows Shell Experience Host in the event viewer. What happens is that the action center is not accessible (clicking on it does nothing), and hitting the Win key to bring up the start menu does nothing.The support over at answers.microsoft.com is pathetic.URL...
View 3 Replies
Oct 20, 2015
How can I change the Protection Setting of external drives from OFF to ON in order to ensure equal treatment when setting a Restore Point?
View 6 Replies
Feb 10, 2016
I'm writing this before having to do a complete wipeout of my system
Specs:
Lenovo Y510p
Hybrid HDD (Seagate) 1TB
m.2 SSD (Trascend) 256GB.
So, since build 9841 I've been using Windows 10 Insider Preview (IP) as my mainly driver. Until the recent redstone builds, Visual Studio has been plagued with problems (From Windows Universal Apps Development to ASP.NET) . I've installed Windows 10 IP in the SSD and have been using it very happily since I've had no major issues, until the ones I've outlined before.
In my Hybrid HDD I had Windows 10 RTM (10586) installed and didn't use it for a quite while (3 months). When these problems rose, I decided to start using that partition again, but out of the blue it decided to start giving me some serious problems: mostly, the whole XAML interface (Start, Volumen, Sound, Battery, etc.) didn't show up. After trying some fixes (From reinstalling Windows Apps to Creating a separate user), I decide to refresh the bits. Unfortunately, even after refreshing my machine didn't fix the XAML interface problems and even worse: I got no possibility to run Universal Apps.
I went and ran some hard disk checkups, from both: the Lenovo Utility and CheckDisk and none threw an error.
The actual problem: Yesterday (Feb. 4) I decide to clean install Windows 10 Build 10586 64-bit in the Hybrid HDD partition (without deleting the OEM reserved spaces) and I'm stuck now on Finalizing the settings. Is there a way to fix it? Tried hitting Shift + F10, but in that specific screen it does not work. In previous screens there are no anomalies.
As last resort I must wipe out everything in both drives and start from zero. I would not like to do that, since Visual Studio is so tough to install (takes too darned long). Is there a way to resort to an alternate method?
View 1 Replies
Mar 24, 2016
I somehow messed up my max memory setting from 8196 to 520 in the system configuration under the 'Boot' tab. Every time I try to restart my laptop, it said bad_system_config_error. How to change back my max memory setting to default. Btw, I'm using lenovo y510p and my os is windows 10.
View 1 Replies
Dec 23, 2015
The Conexant HD Audio Sound Driver was replace by High Definition Audio Device after i update to Windows 10 Home Version 1511 from 1011
Now if i want to plug my earphones to the left side of the computer where the audio jack socket is located the sound does not transfer to my earphones except i will change the default sound device from speakers to headphones.
How can i set it to automatically when i plugin my headphones/earphones/external speaker automatically transfer the sound to this device without changing the settings?
View 1 Replies
