I upgraded using the basic upgrade from Microsoft the other day. Last night I had to downgrade back to 7 as my laptop just wouldn't do a thing with stalling or crashing. I used the recovery guide and now it seems it's restoring and then when it's done the Dell pic comes up with f1 f2 options changes to the wind 10 sign and then changes again back to restoring your previous version of Windows.
I'm on build 10162 and I've got 3 apps that have downloaded and have now been 'restoring user data' for a few hours. Is there a way to reset the store so there apps will finish installing?
During the week i had the windows 10 upgrade install onto my Toshiba Satellite laptop that was running Windows 7. Windows 10 did open but then crashed as it was booting up stuck in an error reboot loop. So i tried to restore the previous version of windows and it has been stuck in the boot cycle ever since. It will run a continuous loop restarting the process every 10 mins. I can't get it ti get out of this reboot loop. What to try and get my laptop up and running.
i upgraded from win 7 ultimate to win 10 pro, but then downgraded back to 7 because my HP laptop was overheating all the time.My problem is that the WIFI show connected with internet access, but I can't open any website or do any download (tried many browsers, the wifi is workin on my phone, and the driver is installed).i am in urgent need to use my internet laptop.
I recently switched over to Windows 10 and the first issue I had was my graphics driver becoming non compatible, but this was fixed when I flashed my BIOS for my computer to the most recent release.
Everything went smooth for a few weeks, but now I can't connect to the internet due to a common problem with Windows 10.
I want to go back to 8.1, but wanted to make sure my current BIOS wasn't going to crash on me ...
So I did a clean install of windows 10 because my computer was running slow, but now I would like to downgrade back to windows and I don't have the "windows.old" because of the clean install.
My question is straightforward: is it possible to downgrade an edition from Windows 10 Pro to Windows 10 Home without having to clean reinstall? I've been wondering why my Win10 wouldn't activate itself until I realized I installed the wrong edition.
When downgrading to windows 7 from windows 10 computer goes into a infinite loop then hours later my computer goes into system repair. I have a hp compaq 6910p 32 gb 2000 MHz thats from 2009 with no disk. My pc will not start up every time I go to start windows normally i get the bdos, everytime i try to go into safe mode the Bdos comes up still. I tried some of the methods I've seen on this website all day, none of them worked.
I upgraded from win 7 ultimate to win 10 pro, but then downgraded back to 7 because my HP laptop was overheating all the time.
My problem is that the WIFI show connected with internet access, but I can't open any website or do any download (tried many browsers, the wifi is workin on my phone, and the driver is installed and rechecked, and did troubleshooting).
While restoring the windows 8.1 upgraded from windows 8, the update wil deleted and windows 8 will restore. Does it is same in windows 10, after upgrading from wn 7, 8, or 8.1 while factory reset or restore does it goes back to previous version?
Though I use Macrium for backup but few months back I created a Backup of one PC with Redo and saved the backup directly in pen drive but forgot to format the pen drive in NTFS and it remained Fat32. So the Redo created backup in four parts i.e part2, part3, part4 and part 5 ( I do not know why part 1 is not there) total 7GB. My question is whether Redo will be able to restore the backup from these parts or I will have to first joined the parts which I do not know how?
I was installing W10 and got that black screen with the big white circle. Then, once it restarted. When it booted again, suddenly a screen came up saying "Attempting to Recover Installation" then saying "Restoring your previous version of Windows....". Why does this happen? Is there any way I can change where it boots into?
Bought Windows 10 Pro from an authorized dealer and successfully installed then activated Windows 10 on a standalone PC with the Activation key that came with the CD.
With that same CD I installed Windows 10 on a Laptop I had as well, (an additional machine). Could not activate because the key was already being used on the standalone. Okay fine....went to Windows Store and bought another key...arrrrg. The laptop activation was successful "Windows 10 on this device is activated with a digital entitlement"
So what happens if my Laptop goes south, crashes and burns lets say. I re-install Windows 10 with the CD I have, how is that Digital Entitlement I just bought for the Laptop, going to be applied? Or remembered? Surely I'm not going to have buy another...
I upgraded to Windows 10 from Windows 7 back on 8/6 and when everything was looking good I backed up my HD with Acronis TrueImage 2015. Unfortunately, my wife was doing something on the PC that caused the machine to go into a booting loop and I was forced to restore the HD from my 8/7 backup. It appeared that the restore worked well until I tried to re-apply all of the patches and updates to Windows 10 and Office. Each time I have tried Windows Update it returns a 0x8024402f error that only says that something bad happened during the update.
I've run the Windows Update troubleshooter and it fixed Windows Update components, however this does not resolve the issue. I have also ran the internet connection troubleshooter and the network adapter troubleshooter and neither found an issue. I don't believe that this is an internet problem however as I can receive and send mail from Outlook 2010 and I can successfully upload and download files from cloud storage and other websites. I have scanned my system files using the SFC /SCANNOW command and it found nothing wrong.
I have also performed a DISM command and it didn't find anything either. I have also cleared the files from the SoftwareDistrubtion folder and I've re-registered a bunch of DLL's from a list I found but that hasn't resolved anything either. I have also downloaded and have run the Windows Repair tool from www.tweaking.com and it didn't fix the problem either. Part of the problem here is that this is Windows 10 and most of the past posts have been in regards to Windows 7 and Windows 8.x. My gut is telling me that this is some sort of permissions issue or some registry issue that's causing this issue to exists.
I upgraded my system to Windows 10 back on Aug 6th and didn't have any problems until yesterday. I won't go into the details of that issue but it forced me to restore Windows 10 from an Acronis TrueImage backup I had taken on the 8/7. Although the restore went well and Windows 10 is back up and running, I am unable now to run Windows update as each time I do so it give me this 0x8024402F error that says that there was some problem installing updates.
Note that this is not an internet connection error as I can browse the internet and download updates to other apps. I have tried the Windows 10 Troubleshooter for Windows update as an Admin and it says it found a configuration problem and fixed it but I still get the error. I have run various system scans and a CHKDSK and they find nothing wrong. I have searched the internet high and low for a solution this problem but the only thing I find seems to be focused on fixes to Windows 7 and Windows 8.x, not Windows 10.
If I switch from Windows 10 Mail to Windows Live Mail, will that restore direct access to my address book contacts? Or would Thunderbird do it? I'm getting tired of W10 mail's cumbersome process for addressing emails
I am in the process of creating an Image of HP Pavillion DVT7 2200 Notebook now. getting some steps to follow to restore it. The Laptop I have Macrium Reflect running on now will have the HD replaced as it on the verge of failing hence why I'm doing doing.
I have physically swapped out the old HD with new HD? I will have Macrium Reflect Image contained on the root of a brand new 1 TB External drive. start at the point of turning the PC on for the first time and if I should have the External drive plugged in before I attempt to boot the laptop for the first time.
After I upgraded to windows 10, I added a couple of new user accounts and deleted the only original windows 7 account. Now I can't delete the last remaining user account because it doesn't allow me to delete it while signed in.
Question 1: how do I delete this remaining user account?
Question 2: without a user account, how can I access the restore option to eliminate windows 10 and restore windows 7?
Question 3: will I be forced to reinstall windows 7 from scratch, and if so, do I need to do anything before installing windows 7?
I just bought an HP Pavillion 15 ab15nr laptop with windows 10 and messed up the install of my programs. The factory recovery partition is untouched and as far as I know intact. How do I go about returning the machine to its factory condition using the Recovery Partition and starting over again? Boy, I miss having a Win7 type installation disk.
Is there is a way to see original photos even if the edited versions have been deleted?
For example, on Windows 7, in Windows Photo Viewer, there was an option under settings I think which said 'show original photos'. When you clicked on this option it showed all your original photos before they had been edited, even if the edited versions had been deleted from the recycle bin.
Is there an equivalent on Windows 10? What I'm looking for is not to see the original photo of a photo which I have edited which has not been deleted, but to see the original photo of a photo that I have deleted from my recycle bin.
A friend of mine is trying to upgrade his PC using ISO but he keeps getting an error that keeps restoring his PC back to Win8.1. His words "it finishes the install, gets to the copying files stage., then after a while it starts restoring my windows 8.1 back." The error code on the screenshot is 0x8007000E-0x2000C with the message "The installation failed in the SAFE_OS phase with an error during APPLY_IMAGE operation."