I did a clean install on my PC with Windows 10 and now am going to download drivers from my mobo site. It is an asus maximus vi hero and there are only a couple of drivers on the site for windows 10. what should I do about all the other missing drivers?
View 1 RepliesI'm planning to go from windows 8 to windows 10 after getting my first build, and I'm curious if I need to update my drivers before getting windows 10 or not. I know you put in the OS disc before any driver discs that came with your hardware so I don't know if I can just do a clean install of windows 10 and then get my drivers or not.
View 1 Repliesown a sony vaio laptop and recently did a clean install of windows 10 on it, however I noticed that the volume was significantly lower than windows 8.1. My computer uses Realtek HD Audio.I tried installing drivers from Sony's as well as Realtek's website, however there is still no change.
View 8 RepliesDone the upgrade, then straight away done the clean install...very impressed...so far, everything working a treat, but alas not a sound from my speakers, device manager shows my budget Asus Xonar DGX sound card is working properly, my light on speakers lights up...but nothing, I've had speakers since windows 95, really miss them now, especially after a super clean install. I know the speakers might be at fault, but how can I check them?, I haven't got another computer, tried them with my Toshiba satellite Equuim but the sound come through their built in system.
View 6 RepliesI'm a student and my university has a subscription to Dreamspark, so I got a Win10 key, along with an ISO-file from there. I'm using a Lenovo G700 and trying to perform a clean install from a bootable USB-stick.
I have tried creating this USB-stick with the "Win7 USB DVD Download Tool", using different guides from the internet with NTFS and Fat32 filesystem, launching the setup normally and through UEFI, using the "Media Creation Tool" ([URL]) to create the USB-stick directly and downloading the ISO file first and creating a bootable USB-stick from that with all the methods above, but no matter which of these methods I use, I get the following error during installation:
"A media driver your computer needs is missing." (URL)
Unfortunatley, I am currently running Win7 Pro x64 on my laptop and the following page says, that the upgrade to Win10 only works from Win8.1, not Win7: [URL]
When I try to use the "Media Creation Tool" to instantly perform an upgrade, I get the following error:
"Something happened... 0x80070422 - 0x90016"
What drivers could the installation possibly be missing? I don't have any external devices plugged in, except for the bootable USB-stick, of course. I tried downloading all drivers for Win7 x64 and Win10 x64 from the Lenovo page ([URL])
I re-installed win10 on my ASUS Q302LA laptop after completely wiping the c: drive using Ubuntu. I installed Ubuntu in order to delete the "Old windows" folder, which apparently can only be done from windows if you have god or "trusted user" status, whatever the hell that is. After installing over Ubuntu using win10 from an iso optical disk, the usb ports and device manager no longer register my seagate external hdd. Now this is scary because the seagate is a "backup" drive and now it's useless. It's still good and works fine with my hp elite so nothing's lost, but the idea that were I not to have a second computer my data would be unaccessible by the very products supposedly designed to keep it safe. The touchscreen feature is also non-functional. I'm not sure whether this is a win10 problem or an ASUS driver problem specific to this computer.
View 1 RepliesLast time my wifi didnt work and eventually nothing, but I managed to do a clean install. Thereafter, with ASUSUTeK, I downloaded some drivers to bring back my internet.
So now I have internet and a fresh clean install, but my touchscreen(and sound too, but I want to focus on touchscreen first) wont work anymore at all. Also, the buttons like f5/f6 dont work anymore either
Things I already tried:
- Calibrating
- Looking in the Device Manager to update drivers.
The problem is, most websites say that I have to turn the ''HID compliant screen'' on and off, but I dont have that driver/thing at all in my device manager. I also cant find a download link on ASUS' drivers website to fix this.
After I upgraded from Win 8.1,
1. Ashampoo programs would not find my (Conexant SmartAudio 221) sound card - Ashampoo looking into this promising a fix after diagnostics - but for weeks now.
2. Audacity would not run beyond v 2.03 (which is reported by others on their forum).
That was 32 bits.
I tried a clean install, 64 bits, and to my surprise, no problem with Ashampoo progs or Audacity 2.1.1.
I'll be using my 32 bit installation whilst I slowly configure the 64 bit version for quite a while.
Other than clean booting, and trying to identify possible conflicts, is there any more specific area I could look at? I have quite a lot of multimedia programs installed.
How Can i Resolve It?? Bluetooth Constantly gives error 43 after Win10 upgrade & Clean Install....
View 1 RepliesI have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
Reading this [URL] there is a troubleshooter which I have downloaded and run. According to that there are drivers for my HP 710C and D1460 printers waiting at windows update but it is not downloading and installing them.
I have enabled automatic driver installation and wu is set to automatic, yet no drivers.
My motherboard manufacturer only has a file for the Windows 10 chipset driver but I remember in the past I was supposed to download the chipset software installation utility first if it was the first time doing a chipset driver on a new comp.
View 1 RepliesSince installing Windows 10 I can't download pictures from my digital camera to my computer. What can I do to fix the problem...
View 9 RepliesNot sure what the deal is, but Win10 keeps automatically downloading NVIDIA graphics drivers and software, even though I don't have any NVIDIA hardware. The proper Microsoft graphics drivers are installed.
I did google this and tried to "hide" these updates via some Powershell commands, but everytime I delete the NVIDIA drivers, windows just redownloads them.
How can I clean install windows 10 on a new SSD, saving the fact that I had original windows (that was purchased built in with the laptop)? Do I need to find the CD key?I have a generic one as I upgraded to windows 10 for free (or are all windows 10 have generic CD keys?).How can I use my Windows licence on a new SSD?
View 1 RepliesMine was with Win 7. This was done few years back throughWin7 upgrade disk. I have this Win 7 upgrade disk and COA for it. (Bought from Amazon).... Can I revert back to Win 7.....
View 3 RepliesMy laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?
View 2 RepliesI'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.
View 6 RepliesAll the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?
View 6 RepliesMy PC was running 8.1 French version converted to English version (Reseller screwed up).In practice a lot of the stuff was displayed sometimes in Eng sometimes in French. I have the 8.1 French CD.So instead of doing the upgrade which I thought would result in another mishmash of languages, I did a clean install of 10 Home Eng via USB key downloaded install media.Apart from a few video probs (BSOD) blinking cursor, all went well.I cannot use 8.1 product key to activate. Looks like I may have to buy new product key for W10.
View 19 RepliesI had a licensed windows 7 PC and did the in-place upgrade to windows 10. However my main hard drive (an SSD) is too small and I want to upgrade it. I understand that if I do a clean install (from an ISO/USB) then windows 10 should still recognise my PC as it was activated.
However, if I change the hard drive (or add memory, add a graphics card etc) does windows still recognise my PC or do I have to go through the stupidty of installing windows 7, installing the service pack, waiting for the inplace upgrade to windows 10, activating, and then wiping everything in order to do a clean install!?!?!
I was wondering if I do a clean install when I get the free upgrade from windows 8.1 to windows 10 if my device drivers (for my cpu, usb ports, wifi, etc) will stay.
View 1 RepliesI have been an Insider since the very first Insider build was released. I had installed each and every build first being on the Slow ring and the on the Fast. I had upgraded from a genuine Windows 8.1 Pro.
When the final RTM build TH1 Professional 10240 was released to Insiders ahead of schedule, I readily installed it and my machine was permanently activated at that time. The product key used was a generic one ending in 3V66T. Many of you may be knowing this.
Today, in fact just now, I formatted my system partition and installed a clean copy of Windows 10 Pro from USB which I had created using the Microsoft Creation Tool. When the setup asked me for a product key, I entered the same generic key as stated above. But now when I go to the Settings, it says the key doesn't work and hence, my machine cannot be activated. I signed-in using my Microsoft account before using the PC.
What the heck! I am an Insider. And didn't expect this to happen. What should I do next? Would the machine get activated itself after some time?
How can I do a clean install in my laptop with the windows 10 build 10130?
View 1 RepliesI have win7 and am going to install win10 from usb. I currently have my OS on my SDD and all my docs,prog files,ect on HDD. Ive read a clean install is best for win10.
My question is, can I delete all the SDD OS partitions during install, select install on the SDD while leaving my HDD completely intact? If so, what option would I select to get to the formatting partition screen without it automatically erasing my HDD files?
Currently I dual-boot Windows 8.1 and Windows 10 Insider Preview on my Lenovo Yoga 2 Pro. I want to eventually delete both partitions and create one big partition to clean-install Windows 10 RTM. My question is, will I be able to successfully activate that Windows 10 with my 8.1-to-10 free upgrade rights if I delete and combine both partitions during setup? I mean, because we're not going to be given product keys for our free upgrade, right?
View 4 Replies