Drive Locked When Trying To Boot?

Oct 31, 2015

I was trying to boot from the Installation Media with the intent to restore using a system image disk. I have mounted the disk previously and determined that it in fact has the image intact. However it is not recognized. So, I tried to install Windows 10 Home with the Installation Media but there is no partition there and the error says "the drive is locked". I am now typing this on the same pc so obviously there is no problem with the drive.

View 9 Replies


Similar Messages:


Networking :: C Drive Appears To Be Locked After Update

Nov 27, 2015

I have updated the computer to windows 10 Build 1511, Through windows update !! This is the latest November major update not a new instillation.

This is very strange i can use the computer and access all my files however i have no access to anything i need to repair my computer the C Drive is showing however shows no content . I try to access it and it says access not allowed. In sharing the C Drive is shared....

View 4 Replies

Drivers/Hardware :: Hard Drive Gets Locked

Dec 2, 2015

"Your PC ran into a problem and needs to restart" This is the message I got when windows 10 stopped

working.. From that it said my computer has an unrepairable problem we will collect the information and restart it for you. It never did restart, so I tried with the windows 10 disk to use start-up repair.. and it told me that the hard drive was locked. So, I had no way to unlock it.. Long story made short. I had to take the hard drive out and hook it up to another computer that has windows 7 installed on it. And it let me unlock the drive, after which i put it back in the computer that it came out of, and it works just fine..

How is one supposed to unlock a hard drive, is there a program to do that? Or did I just luck out, by having another computer to hook it up to. ? I've had this happen on windows 10 more than once..

View 1 Replies

Installation :: Wrong Drive Letter In Msconfig / Boot In Dual Boot System

Jan 27, 2016

In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0

problem description : I see in msconfig / boot a wrong listing

windows 10 ( C:WINDOWS) : Current OS ; Default OS

windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )

Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.

The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?

I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....

View 3 Replies

Recovery Drive Boot Fails With Missing Boot Configuration Data

Feb 2, 2016

When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.

The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.

I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.

View 3 Replies

Installation :: Can't Re-establish Master Boot Record On Boot Drive

Dec 19, 2015

I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).

When I tried to restore the boot drive to the original one for this machine the master boot was missing.

I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:

bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all

After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.

what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.

View 7 Replies

Installation :: USB Recovery Boot Drive Won't Boot

Feb 10, 2016

I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.

View 9 Replies

Laptop Doesn't Boot Because OS Is On D Drive Instead Of C Drive

Oct 18, 2015

My laptop doesn't boot because OS is on E: drive instead of C: drive

When I try to boot it up (it somehow boots up as windows 8.1 instead of my OS windows 10), it gives a BSoD and shows the error code 0xc000021a. I created a bootable USB drive with windows 10 pro on it, but it shows my OS as windows 8.1 instead of 10, and it doesn't allow me to restore or do a startup repair, because they both fail.

Booting up:

Repair shows windows 8.1 instead of 10:

View 9 Replies

New Drive Won't Boot

Nov 6, 2015

After cloning a new ssd the new drive won't boot. The bios recognizes it but the only way to get the machine to boot is to connect the old drive. I'm guessing I'll need to try to clone again or maybe install from the back up? 

View 6 Replies

Boot To CD Or USB Drive Not Allowed

Sep 17, 2015

Since I did clean install of Win 10 I find it will not allow me to boot to internal cd drive or USB drive. I know this is an attempt to secure the OS or lock you out of competing OS like linux or both but I can find no way around this. My bios has not been updated to the secure boot version on purpose but the OS still intercepts any attemp to boot to any device other than drive with OS on it.

My boot sequence is CD first but it is ignored on boot. Also if I go to boot device selection and select CD drive it still boots to win 10. I have tried win 10 setup but there is no option that i have found that allows me to do what I want with my own machine. I am a developer and routinely boot to cd and this behavior is unacceptable. I would like to use win 10 but have gone back to Win 7 until I can find out how to defeat this.

View 9 Replies

Possible To Create A USB Boot Drive

Dec 30, 2015

I am currently running on windows 7 home premium and is planning to upgrade motherboard soon. I know that it is possible for me to create a USB boot drive with Windows 10 on it for a new computer. But I don't know if Windows 7 will interfere with Windows 10. I only have 1 hard drive in my system

View 1 Replies

How To Boot From PCIe Drive

Sep 1, 2015

I have an HP Envy Desktop that boots off the HDD when I bought it, but loads to my PCIe SSD cuz that is where I have windows 10. How do I get it to boot directly on my PCIe SSD? It's an OCZ R4 CM88 1,6TB SSD. The BIOS are set to boot from SSD first, but it continues to boot from HDD as I see the HP logo every time no matter what boot order I select. I tried EasyBCD 2.2 and that didn't work...

View 1 Replies

How To Boot Computer From CD Drive

Oct 20, 2015

So, i am going back to Windows 7 so i have my disc and key. But how to start my computer from the CD drive with windows 10. With Windows 7, there was a key(like F2 or F12) to change boot device. that is not there with Windows 10. So how do i boot my computer from the CD Drive?

View 13 Replies

Does Windows Have To Be On SSD For SSD To Be A Boot Drive

Sep 26, 2015

I want my ssd to be the boot drive and hard drive for storage. I recently installed windows and I accidentally installed it on the hard drive.

View 1 Replies

C Drive Clone Won't Boot

Jan 18, 2016

I'm trying disgnosis for my Dad, who's trying to move over to SSD.

The story so far: Using AOMEI backupper bootable disk, we tried to clone his current HDD onto the SSD. Part-way through the clone process, it gives an error saying that the drive is too fragmented to clone, and stops.

We run defrag on the C: Drive, resulting in a 1% fragmented drive at the end, and try again.

The same message crops up - too fragmented. It turns out the 'recovery' partition (It's an OEM machine, so its ~10Gb rather than the normal 100Mb) is too fragmented to clone, and we can't defrag it.

So we just clone the C: drive, leaving 1Gb of unallocated space, and then use the recovery DVD's to run startup repair, hoping it will restore the MBR or 'normal' recovery partition, and make the system load.
All we get is a blue screen with a blinking cursor in the top left that persists or over 5 minutes.

Startup Repair completes successfully. According to the Log file it ran 2 iterations of the repair operations, and found no errors! However the drive still will not boot.

This is particuarly annoying as I have used backupper both personally and professionally and have NEVER seen the fragmentation issue before, or had any issue at all for that matter with a cloned drive.

View 1 Replies

Clone Hard Drive Will No Boot

Dec 13, 2015

I cloned my hard drive a Seagate 2T to a WD 2T using acronics software.I removed my Seagate drive and plugged in my WD drive in the same spot and system would not boot tried using windows 10 repair disk no luck plugged the Seagate drive back in booted???

View 4 Replies

Installation :: Cannot Get Recovery USB Drive To Boot

Aug 18, 2015

I have just installed the free windows 10 upgrade from Windows 7 home premium. I have used the file history program to create a USB and a DVD recovery disk prior to creating a system image ( not done yet ) I tried to test the recovery but it does not boot the system. The system just continues to boot the Win 10 update. I have changed the boot order by using advanced options to get into the bios. I have put USB key in position 1 and USB cd/dvd in position 2. my System is a Samsung lap top RC530 with Legacy Bios. How can I check my recovery disks USB and DVD. The system just continues to boot as normal. The recovery disks completed ok with no error messages when creating.

when I press esc after pressing the power button all I see is the choice of the 2 internal devices CD/DVD and HDD.

I have set all my usb devices in boot order above these two but the USB is shown as NA.

I am using 64 GB USB 3.0 drive. Note though my computer only has USB 2 ports no USB 3.

I have also used Media Creation tool to create a Windows 10 installation media. It still failed to recognise the drive as a boot device. The Lap top can read the USB drive ok though just not boot from it.

View 3 Replies

Installation :: How To Boot From DVD Drive On HP Laptop

Nov 19, 2015

How do I boot from dvd drive on HP laptop? According to Google it says press esc repeatedly and then f9. I did this and it did not work so I went into the BIOS and changed boot order to cd/dvd drive at the top but it will not boot do I have to press another key?

View 2 Replies

Cannot Boot Unless USB Drive With Image Plugged In

Jul 15, 2015

I can not boot in uefi mode or with secure boot on, I can only use CSM mode. Also when I try to boot without usb drive(which has win 10 on it) in computer it just shuts down and then turn on back and give me error that all boot options have been tried press f4 etc

View 9 Replies

Could Not Boot From Bootable Backup Or USB Drive

Jan 17, 2016

After the recent update I had some problems and decided to reset my system. For some reason I could not boot from my bootable backup drive or a bootable USB drive. I have software which came with the external drive and it previously backed up and created the bootable USB drive. So, I reset the pc and of course it wiped out all my programs like the backup drive software, Ccleaner, Malwarebytes, etc. etc.. I reloaded the software for my backup drive and then was able to restore from the image which I had previously created. Of course I had to get the update again but it went well yhis time. All the programs were there and my system is operating flawlessly once again. The image backup was a lifesaver.

I highly recommend the external usb backup drive for recovery purposes. It was extremely easy to create the bootable image backup (for recovery) and keeps a running backup as well. There are numerous ways to create a backup but this was just too easy and, as it turned out, worked well for me. 

View 5 Replies

HP Pavilion G6 / Recovery Drive Won't Boot

Jan 14, 2016

I have a HP Pavilion g6 laptop that was factory supplied with Windows 8 and uses UEFI. I have now done a clean install of Windows 10 - 1511. If I create a System Repair Disk (CD) the laptop will boot from it, and in the boot menu it shows as UEFI. If I create a Recovery Drive (USB) the laptop won't enter the boot menu, and so can't boot from it, but my non UEFI desktop will boot from it. If I use Macrium Reflect to create a recovery USB drive the laptop will boot from that OK. So it seems that Windows is creating the wrong type of drive. 

View 4 Replies

Boot Drive Space Limit

Aug 2, 2015

I want to put a Seagate 4tb sshd in to my PC as a boot drive so I can install Windows 10 Pro when it's available. But, as I recall, Windows 7 max boot drive space without partition was 2tb. Does Windows 10 have the same limitation?

View 1 Replies

Boot Up With USB Flash Media Drive

Apr 29, 2015

Installed Win 10 and get it working. My problem is I have Win 8.1 Pro on a Samsung EVO SSD T-1. I went out and bought a Samsung 225 gig SSD HDD to install Win 10. I downloaded the Win 7 ISO and it worked perfectly. When I first tried to install Win 10 on the boot up with the USB flash media drive I went into setup on Win 10 and when I selected the new hard drive for the installation it gave me a message that it could not install on that drive. The other partition on the drive said system info. I hit delete and it installed. I don't know if I should have re formatted.

I go to bios setup on my motherboard Asus Z-97 and select Samsung EVO and it goes directly into Win 8.1 Pro. If I reboot and select in the bios Windows media drive it boots into Win 10. My question is I thought (based on all the screen shots I see here in the forum) that when I boot up my computer it should take me to a blue screen with 2 selection boxes Win 8.1 pro or Win 10 and I should be able to select.

I would rather see the 2 boxes where I can select one of them. My last question is when I bring up my Win 10 the fonts on the menus and etc. are so small I cannot hardly read them. I am using a LG 21.9 3440 x 1440 ultra wide monitor and have my text at largest and my screen zoomed to 150.

View 1 Replies

Installation :: Can't Boot USB Drive With X64 Windows Installer

Aug 22, 2015

Whenever I try to install a 64 bit Windows 10 copy from a flash drive, I get stuck on the 4 blue squares, with no white dots spinning. Then after about 10 seconds the PC restarts. I have tried the official way with the media creation tool, I have tried just downloading the ISO and using a third party bootable USB maker, I have tried ISO's from pirate sites (yes, I know, not the best solution) but none of those worked. Every time I tried a different method I always fully formatted the USB drive. Oddly enough the 32 bit version worked once or twice but even that doesn't work anymore. My PC specs are quite good so I really don't know what's the issue. Btw im running a 120 GB AData SSD and a 1 TB Seagate hard drive.

View 5 Replies

Drivers/Hardware :: False Boot Drive?

Feb 23, 2016

I have two disks listed as boot devices when my computer boots up, however I want to skip selecting the disk and boot directly to my SSD (Disk 1) instead. The other drive listed(Disk 3) just goes to a blank screen when selected.In This PC the icon for Disk 3 is faded. There is no blue bar indicating drive space. It is listed as USB Drive (G In Disk Management, Disk 3 is listed as Removable with No media. There is no space available on the disk either.

From"CMD -> diskpart -> list disk" I get:
Disk 0 Online 298GB
Disk 1 Online 223GB
Disk 2 Online 465GB
Disk 3 No Media 0B

When disk 3 is selected and issued the command "Clean" I get the error "There is no media on the device".What can I do to remove this false disk? There is nothing plugged into any USB ports that could be the problem. The problem has also persisted after multiple boots. It appears Windows is seeing a bootable flash drive that isn't real.

View 4 Replies

How To Remove Windows And Boot Files From Drive

Sep 2, 2015

I have two drives with files on them and want to make one drive A inactive(remove windows) so that I can make the other drive have windows 10. What is the easiest way to do that without removing or formating Drive A.

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved