I have a two laptops with Windows 10 x64. Recently I noticed new partition with next available letter. Size is 128mb and it can't be accessed. I checked in Disk Management but this partition is not listed there as per the below screen:
I used MiniTool Partition Wizard and managed to see details about this partition.
I tried Diskpart to remove Drive Letter but no luck:
This happened at the same time on my two HP laptops but not sure what could cause it. Maybe some Windows update? I do not remember installing any new apps. I would like to remove this disk from the list of available disks.
my cd drive icon was showing and working then stopped showing up. I did as much research as I could and purchased AVG driver updater and it worked for a few days and won't work again.
Running windows 10, due to some personal reasons want to change my dynamic disk to a basic disk... But the option for the same is greyed out in Disk Management.
I started experiencing this after my brother installed some malware on my pc while playing CS GO. I have removed all the malware i could find and have ran memory and disk tests which have shown me nothing but positive results, but when i run furmark the disk usage climbs to 100%. I also have noticed my nothbridge overheating which might be the issue. I also have a shady 600W psu that needs changing because it is old and I don't trust it.
I have
CPU: intel i5 3330 GPU: Nvidia gforce gtx680 refrence RAM: 8GB kingston value ram PSU: 600W super cheap generic psu that came with the case HDD: wdc wd5000aakx-001ca0 500GB that needs changing MOBO: msi MSI H61MA-E35 (B3)
[code]...
Edit:I found out the reason for my hdd stopping while under load was that one of my 6 pins was a 2molex to 6pin adapter and one of the molex cables was also the one powering my hdd through a sata power cable.So i plugged in a different one and now it's fine.
When I go to disk management and right click on my # 2 HDD to give it a drive letter, it only shows Convert to Dynamic Disk, Properties and Help. change drive letter and paths does not show up ??.
I recently upgraded from Windows 8 to 10. Post upgrade I have just realized my DVD Drive is not observable/findable in the File manager. It is also not observable in the device manager.
It is however, powered up and is recognized in the BIOS Menu as Sata 4 and recognized by the computer as Boot Device one.
The computer will boot from the DvD Drive if I put a bootable DVD (my old windows 8.1 disc in this case) in the drive, I just tested this.
Yesterday I went from Windows 7 to windows 10 with a clean install.
My system based on an ASUS P9x79Pro motherboard has 4 internal disk drives.
The first two, a 500GB SSD for the system and a 2TB spinning disk, are connected to Intel SATA 6G ports and are fine.
I also have two further 2TB data drives attached to the Marvell SATA 6G ports. It is these that are looking unusual.
After installing windows I installed the Marvell driver from the ASUS website for windows 10. However Device manager does not show Marvell under Storage controllers
Both data drives connected to the Marvel controller appear under eject media as removable drives along with something called "Eject Marvell 91xx config"...
One of the data drives (but not the other) appears in File Explorer as a removable drive.
I have upgraded my OS to Windows 10 from 7 and I can not see the PORTS(COM and LTE) in the device manager. I tried everything but don't know how to find it.
I had Windows 10 Enterprise on a ssd 480gb sandisk ultra II but It's corrupted, I can't even launch Windows or repair tools.
I've managed to run repair tools and get a command prompt, as diskpart says, my disk is on a raw partition now, and it shows the following:
Total space on disk: 448gb
Space available on disk: 448gb
I've read something that on raw filesystem Windows can't see the drive then I'm wondering, if diskparts says that the space available is the same tan total disk, does it mean that I've lost all my data? Is really important for me to recover the data.
I've installed Windows 10 on another drive, but the drive isn't recognized, not in diskpart, not in Windows explorer, and tried about 5-6 programs for recover data on raw disk/partition and none of them saw my disk.
The main question is if I lost all my data, because if not, I will give it to the shop for repair it.
I have a program that I wanted to install into my Win 10 Pro Machine (64 Bit) and have found that the disk can not be read by the DVD/CD-ROM Drive. I also tried it in another Windows 10 Computer (64 Bit) and it also can't read the disk.The disk worked fine under Windows 7, in both the same computers. The drive works as it reads other CD/DVD's.
The disk is good as it works perfect in an other Windows 7 (32 Bit) and Vista computers (32 Bit). Computer is up to date with builds etc.
When I insert any removable drive (USB, SD cards, etc) the device shows up twice in Explorer. Once under "This PC" tree and the other as a device. See attached pic (USB Drive H):
I remember hearing about this being the way it's designed to work, but frankly it's a bit silly - I only need to see a single entry for the drive/device...
Is there any way to get rid of one of these entries without stuffing up some other Explorer feature?
I've done a reinstall of Windows 10 today. I unplugged my internal storage HDD's to isolate the SSD for the install, wiped the SSD, and reinstalled 10.
Now it's installed, I've plugged my 2 internal HDD's back in, started up Windows, and neither drives are showing. Neither in device manager or in Explorer. What could be the issue here, and how do I resolve it?
Since installing windows 10 on my old dell, i am having major problems. The Computer is very slow, and is probably too old to properly run the new Windows, but the biggest issue is that after a restart, i am seeing a split screen display with a line through the centre of the screen, and i can find no way to get it back to a single display. After multiple more restarts it has gone back to one screen, but i am now getting two again. In case i am not being clear, here is a photo of what i am seeing.
When I use the "Safely Remove Hardware and Eject Media" icon/tool, to remove a USB stick, my internal SSD drive shows as a choice to be removed. How can I get the SSD off this list?
In Device Manager, under Disk Drives, looking at the SSD drive's properties there is no "Removal Policy (i.e. choice of "Quick Removal" or "Better Performance") like the removable hard drive on my laptop has.
I installed Win10 Pro x64 from scratch on my desktop computer and that is the only OS I have on that computer. The Device Manager shows an alert - please check the attachment. I have Nvidia Geforce 9400 and have updated the drivers. How can I get rid of that alert ?
My setup before the problem was: - Windows 8.1 in a 250GB SSD with Linux dual boot - Secondary 160GB HDD (fs: ntfs, type: primary) - Secondary 3TB HDD (fs: ntfs, type: gpt)
The 3TB drive was working normally on windows 8.1 when I bought it. After some months I decided to upgrade to Windows 10. After that, I cannot access my drive and Disk Management shows just grey options for the drive.
[URL]
After that I did a clean Windows 8.1 install again just to see if it was an OS problem, but now the same is going on with the management system. I used MiniTool Partition Wizard to check what's going on and this is what it shows
[URL]
What I tried doing is to force a label on this drive with MiniTool (in this case, D:, but then when I try to access the folders in Explorer it says 'D: is not accessible, access denied'. I already tried giving me all permissions/full control in the security tab in various ways but none worked, it still said 'Access Denied'.
[URL]
The only way I could finally access it is by killing explorer.exe and then starting it again with Admin rights, but once I reboot the system, the drive dissappears again and I have to do everything all over (assign label with MiniTool -> kill explorer -> open explorer with admin rights).
[URL]
P.S: Before you ask, I am not trying to recover deleted data. The partition exists, and I can access it through MiniTool Partition Wizard (since it recognizes it as a active EFI Healthy Partition on a GPT formatted drive). The problem is trying to access through Windows Explorer to the data.
I'm having trouble with USB devices not showing up in windows explorer. I put in a thumb drive with data on it, but it's not in win explorer. I went to device manager and found the TD under disk drives. Also my external 3T G: disk drive is there. The thing is that my G: drive shows up twice in win explorer, once as a disk drive and the other as an expansion drive. I still can't see the TD. So how can I look at the drive or do anything with it. The light on it is on and the computer see's it, but no way to access it. I have the latest windows updates. I have all usb and hid unchecked for the computer to put them to sleep if not used, but that doesn't work.