Drivers/Hardware :: Acer Aspire E1-572G VGA Driver Unable To Install
Jan 21, 2016
I have installed intel's driver detection tool and it informed me that I have a custom driver installed by the manufacturer. Acer site scanned my pc and found new driver VGA 10.18.15.4248, which i downloaded but upon installation tells me is the wrong driver for my pc. I have upgraded(haha) from win8.1 to 10, not sure if this is part of the problem. This driver was released 7/15. I ran windows driver updater and it tells me the driver I have, the only one btw, is current. I have tried to contact both Acer and Intel and get no answers.
View 5 Replies
Similar Messages:
Nov 18, 2015
For the past few months, the right touchpad button does not work with the Windows 10 drivers. Windows 8.1 drivers worked fine. If I switch mouse settings to left handed, then the buttons work fine, but obviously this is awkward to get used to. I have rollbacked the driver to a very old edition and it worked fine, however then I had no synaptics touchpad settings so the touchpad settings could not be altered.
19.0.9.7 is the synaptics version
touchpad works fine on other user accounts
View 9 Replies
Sep 23, 2015
run down of errors when i try to do automatic repair:
1.Troubleshoot>Reset this PC>Keep my files> = error: The drive where Windows is installed is locked. Unlock the drive and try again.
2.Troubleshoot>Reset this PC>Removes everything>= error:Unable to reset your PC. A required drive partition is missing.
3.Troubleshoot>Advance options>System restore>= error: System restore: To use System Restore, you must specify which Windows installation to restore. Restart this computer, select an operating system, and then select System Restore.
4. Troubleshoot>System Image Recovery>= error:Windows cannot find a system image on this computer. Attach the backup hard disk or insert the final DVD from a backup set and click retry. Alternatively close this dialog for more options.
5.Troubleshoot>Startup repair>= error: start up repair couldn't repair PC. Press advance to try other options to repair you PC or "shutdown" to turn off your PC. Log file:
6.Troubleshoot>Go back to the previous build>= Windows ran into a problem and wont be able to take you back to the previous build. Try resetting your current build instead(Troubleshoot > Reset this PC).
7. Install>Upgrade>Compatibility report: The computer started using the Windows installation media. Remove the installation media and restart your computer so that windows stars normally. Then, insert the installation media and restart the upgrade.
8.Install>Custom> We couldnt find any drivers. To get a storage driver, click load driver
when trying to load the USB it says no signed drivers were found. Make sure that the installation media contains the correct drivers, and then click OK
I just want to get my laptop running at this point and probably go back to windows 7. dont mind losing my files cus most were backed up
View 8 Replies
Aug 21, 2015
I have an acer aspire v5 573g. I wanted to clean install Windows 10 on it. And every time I tried it gave me an error code : 0x800701E3. I thought it might be due corrupt instalation file or something. I tried other copies but it gives same error. I don't know what it means. I tried searching on the net, but I didn't find anything. I will also attach a photo which I took.
View 10 Replies
Dec 17, 2015
I've got a problem with my second laptop, acer aspire e15-551P. After I upgraded my windows to 10, voice totally disappeared also sound card cannot be found. Already downloaded and installed all available drivers from acer site. Still doesn't work.
View 6 Replies
Jan 24, 2016
New build. From a fresh install of windows 10 i try to install the drver for my IGPU Intel HD 530. each time i do that i get a BSOD with this message:
VIDEO_TDR_FAILURE igdkmd64.sys
Or sometimes it's
SYSTEM_THREAD_EXEPTION_NOT_HANDELED igdkmd64.sys
I've tried drivers from motherboard manufacturer CD, website and intel and some autodetect driver software. I always get the same behavior:
The screen start blinking several time ( black screen) before showing the BSOD then reboot and repeat it self. Even the driver downloaded by windows update have the same impact.
I've managed to install it in safe mode but when i restart in normal mode i get the same behavior.
I've tried 2 different monitors, VGA and HDMI , tried with UEFI on/off => same result.
I've tweaked once the tdr delay to 8 second, but didn't work.
CPU: Intel I7-6700KMotherboard: ASUS Z170 PRO GAMING
RAM: HyperX FURY HX421C14FBK2/16 - 16Go Kit (2x 8Go) 2133MHz DDR4 Non-ECC CL14 DIMM
SSD: Samsung EVO 850 MZ-75E250B/EU 250 GB
with 80 PLUS 550W power supply.
OS: WINDOWS 10 FRENCH HOME X20-25432
View 6 Replies
Aug 5, 2015
I did a clean install of Windows 10 on my Lenovo Miix 2 8 tablet. Everything went fine. But, I wasn't able to install the driver for the internal GPS. It's a Broadcom BCM4752. The installation of all drivers I found (including Lenovo) ended with the message: "An upgrade was needed. Please reboot your system and restart the installer." Which I did - but, it didn't work!
Installing the driver under Windows 8.1 and upgrading to Windows 10 worked without problems!
View 2 Replies
Nov 7, 2015
Acer Aspire 5943G upgraded from Win 7 to 10, Kaspersky 2015.
After tolerating a couple of glitches (track pad not scrolling, right speaker down, tiles at start menu not displayed, some icons not visable on task bar) I can now not boot up. The windows 10 logo appears with a rotating 'we'll get there sometime' device for a short while, after which the screen flickers black then grey/blue. It does not reach sign in, there is no cursor and it stays this way, although it will shut down ready for me to try again. I have tried hitting F8 during this but with no effect. F2 brings up set up, but how I can get back in to it?
View 11 Replies
Aug 14, 2015
My Laptop will not sleep. It's an Acer Aspire 5250 Series Laptop. Below is the screenshot of the issues that I have ran and found from Command Prompt.
View 9 Replies
Mar 27, 2016
Acer Aspire XC-603 computer came with Windows 8.1 ... Upgraded to Windows 10 Home around March 1, 2016 Version 1511 OS Build 10586.164 ... First crash came the next day after the upgrade, then around every two weeks.
View 1 Replies
Aug 15, 2015
I set the screen sleepmode to 2 minutes and that works but 1 minute after that the computer goes in to sleepmode. Why?
View 1 Replies
Jul 30, 2015
I have a problem with my Acer Aspire 5943G. I just upgraded from Windows 7 Home Premium OA to Windows 10 Home, and then updated Windows 10 until there were no updates showing. A couple problems appeared which I was able to fix but not a particular one; When I startup the laptop it all goes smoothly but when it gets to the login screen (clock with the background), my screen's backlight suddenly turns off.
I can still see the faint screen info if I shine a bright light in it. If I restart it, it fixes the problem though. This is rather frustrating as I cannot expect when it will happen (right now it happened when I turned it on from hibernation, sometimes it happens with a normal shutdown and startup). My GPU is ATI mobility radeon HD 5650. Also having a sound issue. I can get the sound to work through headphones, but not through the speakers.
View 6 Replies
Jan 10, 2016
I have an Acer Aspire laptop that used to have Bluetooth on it. I just recently noticed that all evidence of Bluetooth has disappeared from the OS. The Bluetooth module that I am using is:
Bluetooth 4.0 + HS, the two drivers listed on the support portal for my model number are an Atheros Wifi/BT combo and a Broadcom. I can't tell since there since the OS doesn't see it.
First thing I tried is to download and install both drivers from the manufacture's site (Acer Support). Both installers did not detect the BT module being present and ended prematurely.
View 1 Replies
Dec 3, 2015
The computer is a Acer Aspire E15 with 4gb RAM and Amd E2 Chip. It was originally running Windows 8.1 but I recently updated to windows 10 and I got the Irql not less or equal bsod. I can't access anything because it just goes back to the bsod.
View 1 Replies
Aug 17, 2015
Whenever I connect my acer aspire v5 572 running win 10 connects to external media like printer or mobile .. It freezes and show me page fault in non paged area ..
View 1 Replies
Oct 3, 2015
So, I was chatting with Microsoft about an issue with OneDrive, and all of a sudden my computer crashes. The error says "KERNEL AUTO BOOST LOCK WITH RAISED IRQL". I have included the dump log in this thread.
DESKTOP-CS4PJG9-Sat_10_03_2015_121137_66.zip
View 6 Replies
Jul 30, 2015
I have an Acer Aspire 7750g laptop for like 5 years now. Updating it's graphics card would result in having lines randomly flicker all over the screen horizontally. This is the reason I did not update it's drivers. Now that Windows 10 has released, it seems to have update it automatically which is irritating. I've searched in the internet some ways to fix it and tried one of them: Underclock the Memory Clock by 50 MHz in MSI Afterburner. This did not work at all. What I have done is I have underclocked the Core Clock by 50 MHz aswell and still no result. I've kept these two that way and restarted my laptop to hope that this might fix it, I was wrong. Now I can't even boot into windows. This is what I get when I try to boot into Windows: [URL]
I have tried going into safe mode and that's where I get the BSOD that says Kernel_Data_Inpage_Error. I have also enabled the low-resolution video mode, still no result.What I could do is reinstall the operating system but I'd like to keep that as my last option as I do not want to lose my files and I don't know if my windows 7 key will be accepted while installing windows 10 from a flashdrive.
View 1 Replies
Oct 29, 2015
I have an Acer Aspire V5-573G, recently upgraded to Windows 10 a few weeks ago. Was using my laptop this morning just fine but tonight when I turned it on, I get to the password log in and I can't type in my password.
I can still move the cursor around the screen and go back to the screen displaying the time/date before the password log in screen. I just can't type in my password! Nothing happens.
Also the little icons in the bottom right corner are dull, the clock symbol and the power symbol, although the wifi symbol is highlighted as it's connected. I've unplugged all external hard drives and even turned off my wifi.
View 6 Replies
Sep 21, 2015
Unfortunatley I am unable to install any driver for my phone; the Oneplus One. This is the error I'm getting:
"one of the installers for this device cannot perform the installation at this time"
I get the same error for ADB and Fastboot drivers.
View 4 Replies
Jan 1, 2016
I recently replaced my GTX 660 with a GTX 970, and after I had completed installing that, the PC started up perfectly. The only issue was the internet said it was not connected (with a red X on the connection icon). I used the troubleshooter to discover that I did not have a LAN driver installed and windows didn't couldn't detect what I needed. I check my files and the driver was still there, so I uninstalled it expecting the disk that had come with the box of the motherboard to reinstall the driver correctly. After I had uninstalled the driver and used the disk to try and reinstall, the driver did not reappear. I searched for a driver install separately on my laptop, but to no avail. Nothing seemed to be compatible with my motherboard. The driver which I had assumed matched state that it could not detect the family of driver on my PC. I tried to do a recovery but didn't have a backup file, and resorted to a factory reset. After trying the disk after the reset, and continuing to search for the right driver, I came up empty handed.
View 9 Replies
Oct 14, 2015
i've updated to windows 10 on my pc and i'm unable to download the driver for my epson sx235w printer to my pc. i've tried the install disc and also via the drivers online. each time it starts to download the drivers it gets stuck on the download part with the spinning wheel for at least 30mins.
the printer was working perfectly on windows 8 via a usb cable, but since going to windows 10 the printer isnt recognised and the drivers wont install.
View 9 Replies
Jan 22, 2016
My drivers failed to install correctly, my computer black-screened during the install of them when I was using Driver Booster. Now my PC isn't detecting my second HDD. It is in BIOS, but not in Device Manager. It is not showing up in all utilities, even if I show hidden ones. The stupid program didn't create a backup and I can't tell for sure what drivers it has broken.
I think some were Human Interface Devices, Universal Serial Bus Controllers, some SATA controllers and some others, can't tell. It also isn't showing up where you format and partition drives, windows just straight up can't detect that it is connected. I have tried Windows Repair, didn't work. I can't find any info, I don't have a way to roll-back. Will resetting my PC even work? Now I can't access my main drive, how can I reset these basic drivers without being able to rollback? I have seen some mention of uninstalling drivers such as...
"I had similar problem with my added disk drive when I upgraded. I had to go to device manager IDE ATA/ATAPI controllers and delete all ATA channels, back out and restart. Let Windows find all ATA devices and there were both my disk drives.."
But I am not certain whether it is safe to uninstall that driver or others. All my files are on that drive. My PC now cant detect my on-board SSD too and it cannot detect my CD-ROM too. Would resetting my BIOS reset the those base drivers?
View 1 Replies
Nov 21, 2015
I have a notebook with nVidia 860m video card. There is GeForce Experience preinstalled and it recommends to update driver. Problem is: Win 10 does not recognize 860m after rebooting my system when I install nVidia's fresh drivers. I don't understand that sort of problem because I always updated drivers on win 8.1 without any problem, win 10 is updated regularly. So if I am interested to install recommended updates, is there a way to understand will it work or not after reboot without actual install? I tried to installed drives via devices manager, it is installed without any problems but does not work after reboot.
View 9 Replies
Aug 15, 2015
As I encounter problems with my Lan driver Realtek and Windows 10 Pro 64, somone on the forum said me to download the last version from Microsoft update catalog which seems the good one.
So I downloaded the driver but it is a .cab file. When I unpacked the files I obtain four files : a .cat file, a .inf file, a .sys file and a .DLL file. There is no setup.exe file....
I tried to install the driver using the command "HDWWIZ". It sees the .inf file but noting installs..
View 6 Replies
Nov 10, 2015
Recently I was notified that a driver installation failed. I went and checked it out, and it was a driver for HD 4600 graphics. My old system ran an i7-4790K, and when I upgraded to X99 I did not reimage my SSD.
Is there a way I can remove an update from Windows Update? The CPU I have has no iGPU, let alone HD 4600.
View 1 Replies
Jul 30, 2015
On Windows 8. 1, I had no issues with this speaker. It's a JBL Charge. After upgrading to 10 it worked fine until a reboot when it failed to connect (it pairs, but won't connect, and the speaker doesn't appear as an audio-out option in Sound settings).
The Bluetooth wizard in PC Settings says "Driver error" next to the speaker icon.
Poking around in device manager, I see this error:
"This device cannot start. (Code 10)
{Conflicting Address Range}
The specified address range conflicts with the address space."
The only references I find to this error online are for different (and quite old) version of windows, and seem unrelated to Bluetooth.
I can't even look at the "resources" tab because it appears to have vanished in Windows 10!
View 3 Replies
