Drivers/Hardware :: Audio Devices In Device Manager But Not In Playback Devices
Oct 2, 2015
Laptop Samsung NP300V5A. Sound stops working about a month after Win 10 upgrade. No changes done at the time.Audio devices show up under Device Manager, but not under Playback/Recording Devices. Same for Realtek Sound Manager - it doesn't see the devices. I can install, delete and update drivers under Device manager but it doesn't make any difference. It is not a physical problem, tested on Linux live CD.
Solutions tried:
-Installing various versions of HD Realtek Drivers (including windows update version)
-Installing/Removing Realtek software.
-Enabling/Disabling devices under Device Manager
-Called spirits of ancestors. Seemed like it worked for a while, but ended up being a joke.
-Did system restore to various dates.
-Restarted in safe mode
-Restarted various services such as Windows Audio, Windows Audio Endpoint Builder, Plug'n'Pray, Power, etc.
-Checked system, application and driver even logs.
-Tried a couple of registry fixes. Angered spirits of ancestors. Turning gray..
-Reinstalled chipset drivers
-Rebooted about 30 times
-Sound Device Troubleshooting finds no issues
-Display Disabled Devices is enabled
View 1 Replies
Similar Messages:
Mar 5, 2016
so before I wiped my entire PC the sound was working flawlessly - I would use the audio inputs for the Razer Blackwidow Chroma and it would work perfectly.Since the reset however, no sound has been discoverable, I get a red x on my speaker, and it says "No audio drivers installed" on "Playback Devices" I have tried putting my headphones in every audio jack on my PC (front, back and keyboard) and it still isn't picking my headphones up, I have installed the latest drivers and still no joy.
View 1 Replies
Aug 11, 2015
I've upgraded my ASUS U36SG from Windows 8.1 Professional to Windows 10 Enterprise. Everything went fine unless the issue "no audio output devices are installed",
I've tried almost all the solutions for that problem in other similar threads without any success.
Consider that now, in my Device Manager I can see this (OS is in italian):
Both Microsoft and Realtek HD Audio Driver up to date to their last version.
But, no audio (or microphone) device:
I also write to ASUS and they first suggested me to install a legacy version of the Realtek Audio Driver (v 6..0.1.7503) then to rollback to Windows 7 Pro (I'm not joking...)
How to get my laptop to have its sounds back?
View 4 Replies
Oct 7, 2015
How can I remove an unspecified device in printers and devices. The unspecified device was a result of a failed attempt to add a printer. It won't allow me to uninstall it, I did remove an error in the device manager but that didn't do anything. Right clicking has no effect.
View 2 Replies
Sep 8, 2015
I have a M4A87TD EVO motherboard and use windows 10. Everytime nvidia puts out a new driver for my GTX 960 graphics card it seems to conflict with my motherboard VIA driver. I never had problems with windows 7. I'm not the only one having problems with this. My computer defaults to my hdmi monitor speakers, I have to keep changing it to my plug in speakers and doesn't cross over automatically to head phones when I plug them in. my headphones constantly disappears from my playback devices so I constantly have to delete the drivers and reinstalling them.
View 1 Replies
Feb 5, 2016
I can't get surround sound to work on my Windows 10! I have a HDMI Cable going from my gpu (R9 270x) to a projector, and from that an optical audio cable is being sent to my BluRay player with the speakers connected to it... I get sound from the front left and right speakers but thats it, when I go into the playback devices and configure it 5.1 surround sound is not an option.
View 1 Replies
Sep 13, 2015
I gave up on trying to do a clean install, so I just deleted every single program in control panel.
All of my drivers were either automatically updated or I was able to update them myself.
These three are listed as unknown. The drivers won't update.
I ran the Intel Driver Update Utility, and it said no drivers found.
I checked the Asus driver page, and the driver list barely had anything at all.
Pretty sure these are named something like thermal, collaborative, and something else.
View 3 Replies
Sep 4, 2015
I've been using Win10 since the general release. This was an update install on a Win7 laptop.Apart from a few issues (waking from sleep on scheduled tasks, lack of control on updates) I have a problem with external devices.
If I use several USB flash drives/harddrive I'm able to eject one or two but then I can't eject any others. When this happens I don't get the menu option to eject/safely remove the device through "explorer" and the drive doesn't appear in the "safely remove" icon on the task bar. I can still access the drive without issue just don't have any way to eject except to shutdown the laptop. If I reboot the laptop but leave the device attached the eject option reappears.
The laptop is fully patched and I can't work out what is happening and google hasn't revealed any similar problems except the normal "device is in use" message.
View 9 Replies
Dec 19, 2015
Since my PC was updated to Windows 10 I have been having trouble with USB devices not working. It appears the drivers do not load or do not work. Example is my Saitek rudder pedals. They appear to be fully installed and appear in the device list but they do not work. I go into the device manager and update the driver to the exact same driver and it works. I plug in my iPhone and it is recognized as an iPhone but appears in the Other Devices with a yellow exclamation. A check and it says there are no drivers. Manually find the drivers and update them and it is good until I pull it out. Next time I plug it in same thing. Phantom 3 pro wont show the disk drive and have to load in a generic disk drive driver and all good. This list goes on.
View 1 Replies
Sep 20, 2015
My external hard disks , and one MP3 player (all USB devices) are no longer recognized, nor appear on "This PC", after I upgraded my Windows 8.1 to Windows 10 OS. Other devices, such as my Android phone USB connection still works well. I made sure that the "Automatic download of driver software for devices" is turned on in the Device Installation Setup.
View 2 Replies
Nov 15, 2015
Laptop: HP Pavilion Notebook - 17-f202na
I purchased this laptop some months ago using Windows 8.1. I had so many problems and hated the OS so much I upgraded to Windows 10. I have found that some devices I plug in via USB work just fine but some do not. It seems that the more sophisticated devices do not work.
I have a few HDDs from old laptops that I have put into caddies - these work fine connected by USB. However the following do not work at all when connected by USB.
* Nook Glowlight
* Samsung Galaxy S3
* Toshiba Stor.E HDD
* CBA Digital HDD
They all light up indicating that they are charging however there is no drive registered in This PC, nothing appears in Devices and Printers, nothing that I can find anywhere that indicates that the PC detects a thing. There are no error messages or notifications. This is true for all the USB ports.
I've tried a few things over the last few weeks for each device as I've learned that another doesn't connect but I think it might be best to start from scratch and assume nothing about how far I have got. I'm finding ways round connecting the Galaxy and there's nothing too pressing right now on the HDDs that I need to access.
View 6 Replies
Dec 30, 2015
When starting up my laptop this morning, my wireless mouse didn't work. I replaced the battery, still didn't work. Tried on another computer, the mouse did work. I went to look in device manager, the mouse wasn't detected by the laptop. I tried to connect my external harddrive, it got power but also wasn't detected by my laptop. Everything worked fine yesterday.
View 2 Replies
Sep 14, 2015
I am running Windows 10 Pro 64-bit on a Lenovo T420 laptop and use the following two monitors in extended display mode:
1.) ASUS PA238Q connected via DisplayPort (Primary Display)
2.) Samsung Syncmaster 245BW connected via DVI (Secondary Display)
The display of the monitors works perfectly, it's just that when I start windows, the audio comes through my laptop speakers. Under "Playback devices", it lists the ASUS as "Not plugged in." If I either power-cycle my ASUS or disconnect and re-connect the displayport cable, the monitor is detected as plugged in under "playback devices" and the audio comes through the speakers attached to the ASUS monitor.
I have a Intel HD Graphic 3000 card and the Intel HD graphics app correctly recognized my monitors by their true model #. Device Manager has my laptop display (LCD 1600x900), SyncMaster 245B/245BW/245BPlus(Digital) and Generic PnP Monitor listed (instead of ASUS PA238Q). There do not seem to be any drivers for the ASUS monitors off their site that I could find.
View 1 Replies
Oct 21, 2015
Windows 10 should find new drivers through the update mechanism, which doesnt work always though. And if you go into device manager and click on a device and do a look for new drivers, it always finds new ones with a high chance. But it' just stupid to click all 100 devices single through. Isnt there a smart way to do this? Why isnt there an option for search and download all devices drivers.
View 7 Replies
Dec 2, 2015
Basically what the title says. I need to be able to:
1. Change the audio playback device to a specific device.
2. Change the active window.
Both need to be able to be done in cmd. How would I be able to do that?
View 3 Replies
Nov 1, 2015
I have once again run into a problem with W10, and it's getting very frustrating with all these errors and malfunctions that W10 has. The problem is that when I plug a USB-device in my computer, no sound is being played to signal that the USB-device has been recognized, and that really seems to be the case. I can't even use my mouse.
I believe the problem started after the latest update for Windows 10 which took place about one day ago. Otherwise what could cause this kind of error.
I have been also wondering if it is possible to downgrade my laptop back to Windows 8. Windows 10 is clearly a very unstable OS released in a hurry and I have encountered the most bizarre problems with it, including Sony Vegas Pro 13 not launching any more.
View 1 Replies
Jul 30, 2015
In the control panel , Devices and Printers is slow to open. Takes a 5 sec or more search but it does finally open and all the devices are there.
View 9 Replies
Nov 8, 2015
How can I disable WPD devices Write Access on Windows Home Editions because there is no GPEdit.msc on Windows Home Editions.
View 3 Replies
Oct 8, 2015
My Taskbar no longer has the devices icon, the one which allows you to 'safely remove a device' such as a USB drive. What happened to it. I hoped re-booting might bring it back but it has not. How do I recover it?
View 2 Replies
Jan 31, 2016
When I go to Control Panel > Devices & Printers, it takes a good 20 seconds for the progress bar to move across the window and the Devices & Printers window to open.
View 7 Replies
Jan 17, 2016
I've got the error code 52 in device manager for all 3 imaging devices (an internal and an external web cameras and an HP scanner). I was using Windows 8.1 on my Toshiba Satellite laptop and upgraded to Windows 10 Home edition a few months ago. All the time the imaging devices worked normally and I seemingly some Windows update resulted in to code 52 (Windows cannot verify the digital signature for the drivers required for this device).
Unfortunately returning to previous restore points did not work. I tried to remove the upper limit filter which I found in the registry key HKEY_LOCAL_MACHINESYSTEMControlSet001ControlClass{6bdd1fc6-810f-11d0-bec7-08002be2092f}. As the result the yellow triangles and errors with code 52 disappeared and scanner could work, but both cameras still fail to work. So I restored the registry to the previous state. All the drivers are up to date.
View 7 Replies
Dec 31, 2015
I'm having trouble with USB devices not showing up in windows explorer. I put in a thumb drive with data on it, but it's not in win explorer. I went to device manager and found the TD under disk drives. Also my external 3T G: disk drive is there. The thing is that my G: drive shows up twice in win explorer, once as a disk drive and the other as an expansion drive. I still can't see the TD. So how can I look at the drive or do anything with it. The light on it is on and the computer see's it, but no way to access it. I have the latest windows updates. I have all usb and hid unchecked for the computer to put them to sleep if not used, but that doesn't work.
View 9 Replies
Mar 5, 2016
i don't have any bluetooth or even wireless devices but in the action center bluetooth is always turned on! and when i click on it, Its just open Settings.
View 9 Replies
Sep 30, 2015
Couldn't get my USB IR adapter to work in W10 and found the answer in the link below.
[URL]
View 9 Replies
Jan 31, 2016
I have a problem with my iPhone 5s/iOS 9.2.1 in Windows 10 Pro x64 Build 10586.71, as shown in the pictures:
Although everything works OK, i.e.
-iTunes v.12.3.2.35 recognizes it, backs it up and syncs it
-I can see its content from Windows Explorer
-and in Device Manager has the latest drivers for both Apple iPhone & Apple Mobile Device USB Driver
The iPhone is shown in "Devices and Printers" under Unspecified Devices.
View 9 Replies
Sep 10, 2015
I have this issue where the files and folders on an external device (such as an external HDD and USB) are not showing up, yet the device is visible. I only started getting this issue after I connected my USB to another computer which makes me think a virus caused this. Here's where I am at:
The drive in question is the "STEAM GAMES (F:)" drive. It shows up in explorer as shown:
And when opened, this is what's inside the F drive:
By showing hidden files and not hiding protected operating system files, this is what shows:
What I've tried:
The command "attrib -h -s -r -a /s /d F:*.*" returns this: Full system scan using Anti-MalwareBytes and Avast! reveals nothing.Running RKill, UsbFix, RogueKiller, and iExplore.exe does not fix the problem.
View 1 Replies
