Drivers/Hardware :: Audio Disabled After Upgrading In Dell Optiplex AIO
Sep 19, 2015
Since I upgrade to Windows 10 (coming from 8.1) in my friend's Dell Optiplex 3011 All-In-One computer, with built-in speakers, the audio has been disabled, and I see the Windows speaker icon is with an "x". In Windows 8.1, the audio was working normally, so it's not a hardware issue.
However, if I plug in an earphone, the audio output is enabled and the Windows speaker icon changes to normal one. I installed the latest version of Realtek HD Audio driver (R2.79), and restarted, but the audio continues disabled unless an earphone is connected.
I first upgraded to Windows 10 and installed the Realtek audio drivers. Then, I performed did a clean install and installed the Realtek audio driver again, but audio is still disabled. When I open the Realtek Audio Manager in Control Panel, only the microphone tab appears. When I plug an earphone, the speaker/earphone tab is visible as it should be, disappearing after I unplug it.
I reinstalled Windows 8.1 in his system hoping to have audio working again, but the problem persists. I've tried installing the Realtek HD Audio driver from Dell supporte page for my product (entering the service tag to be 100% sure), but no luck. Windows troubleshooting is useless as usual, only asking me to plug in an earphone, like I didn't know it. I even upgraded Dell BIOS/UEFI firmware to latest version (A07), but it didn't fix anything.
Info:
System: Dell Optiplex 3011 All-in-One
OS: Windows 10 Home Single Language
Realtek version: R.279
Lost audio on HP DV6700 laptop since upgrading to Windows 10. Ihave removed sound device from device manager and reinstalled, have replaced driver with previously saved W7 driver....still nothing, not even the windows system sounds, critical battery etc.... All seems eps ok except this.....saw a post that says the sound is integrated with the graphic card, but the graphic card now has a windows 10 driver from nvidea.....maybe should downgrade GPU with W7 driver...
Just tried the idea of setting frequency to 16bit 9600 but I received no sound output error box....then went to enhancements settings where it has bass etc etc settings, was disabled so enabled it without choosing any option..then went back to frequency and changed it to default, which is 24 bit 19200....then was told not supported by this device but then miraculously it worked....now have all sound restored windows music everything...not sure if still have windows 7 driver...it is MS 2008... really scared to update the driver as it is all now working....not sure how I fixed it though, was it one particular action ? or a combination...?
The time i have installed windows 10 my wifi & audio started creating some problems. Everytime I switch on me laptop i have restart it again to connect it to a LAN or a network & the same thing happens with the audio too, it automatically gets disabled & to enable it i have to troubleshoot the problems to fix it.
My DELL Latitude laptop came with Windows 8.1 Pro x64 on it. I decided that I want to upgrade it to Windows 10 Pro x64.Before I did anything I used DELL Backup and Recovery to create a flash drive so I can always restore the PC back to factory if anything goes wrong during the upgrade process.
After creating the recovery media I used the Windows 10 upgrade wizard to upgrade to Windows 10 carrying over all of my existing files. I primarily did this so my Windows 8.1 Product Key which is injected into the motherboard would officially become a Windows 10 Product Key.Now I would like to do a 100% clean install of Windows 10 through a bootable Windows 10 USB flash drive that I just got done creating but have a few questions:I booted from the flash drive and went to Custom (Advanced) install and I am currently viewing all of the partitions:
Which of these are DELL related and which of these are just the additional partitions Windows automatically installs?Can I just delete them all and fresh install Windows 10 on Unpartitioned space?Is there any that are non operating system related and might be worth keeping like the DIAGS one?Will my DELL Backup and Recovery media rely on any of these if I delete them and then try to use it later on?Is there any use for any single one these anymore now that I have backup recovery media and will be going to Windows 10?
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I've just done a clean install of W10 on my Dell Inspiron 7537 laptop. I turned off the laptop last night when the battery was about half discharged.
I tried turning on the laptop today after it had been off 18 hours and it was completely dead - there was no response to the power on button and no charging light despite the charger outputting the correct voltage.
I read online about removing the battery so I did this. I removed the battery, pressed the power button for 60s then plugged in the power lead and hey presto the laptop started! I then put the battery back in and started W10 fine. The battery showed 56% charge so the battery wasn't flat.
I can only think there was a poor battery connection which prevented the laptop starting and removing and replacing the battery cured this.
Just like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
I have a Sony Optiarc DVD drive. When I first upgraded from Windows 7 to Windows 10 it was working but later it is not. It shows in the Bios but not in Windows. I even bought a new Lite-on DVD drive and put it in and still not recognized by Windows 10.
so before I wiped my entire PC the sound was working flawlessly - I would use the audio inputs for the Razer Blackwidow Chroma and it would work perfectly.Since the reset however, no sound has been discoverable, I get a red x on my speaker, and it says "No audio drivers installed" on "Playback Devices" I have tried putting my headphones in every audio jack on my PC (front, back and keyboard) and it still isn't picking my headphones up, I have installed the latest drivers and still no joy.
Originally the DVD drive would not show at all in File Explorer, despite Device Manager recognising, drivers up to date, etc. Dell diagnostics reported various feedback ranging from perfectly ok (SupportAssist, on-line smart diagnostic quick test) to failing some tests (on-line optical drive tests) and requiring attention (sadly, the attention it suggested I use was a 'fix' tool on the Microsoft website that would not run on Windows 10 operating platform so I have not been able to persue further)
Things improved a little after downloading and installing all of the urgent and recommended Dell updates, plus installing all of the Windows updates. Now the laptop shows the drive in File Explorer, and occasionally media is recognised and even played. For example, inserting an audio CD into the drive immediately after booting up will run autoplay and the tracks are displayed as expected in File Explorer.
However, subsequent CDs (or any other media) are not recognised. The drive 'acts' like it should (led goes on, whirring sound made, etc) but nothing happens. File Explorer displays whatever the previous media contents were.
So for example, if I insert an audio CD with 10 tracks immediately after booting, the CD will autoplay and the 10 tracks will display in File Explorer. Everything seems fine. If I then eject this CD, and put in an audio CD with 5 tracks, File Explorer will continue to display the 10 tracks from the first CD. The new CD wont autoplay. Its basically not recognised.
This is quite frustrating because it means I have to reboot every time I want to change media.
I installed windows 10 for my Asus laptop(which was running windows 8.1 pro and the mic worked perfectly) , and the microphone just doesn't work. I tried to install the latest win 10 drivers for Via, and that didn't work. Are there any fixes for this problem, or am I just out of luck?
I just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.
After updating win 10 from 8.1, am getting the frequent pop when ever i use the touchpad. (pic attached)
1) Resinstalled driver, still popup continues 2) using autorun app, i have tried to remove the entry (It stops the popup but the Dell touchpad utility is not starting up, so I cannot use the scrolling and the gesture support) 3) Again I turned on the services from autorun, popup came again 4) Tried cleaning registry by ccleaner, still the issue persists. 5) Tried to reset windows, but tat also not happening (boot device failure)
Laptop : Dell Inspiron 5547 Driver : Synaptics touchpad driver V19 OS : Windows 10
I am being bugged by a problem associated with USB ports apparently being intermittently disabled or disconnected.
The result is a cacophony of device disconnected sounds being played. It ultimately means the PC has to be shutdown. Occasionally a device connected sound will be heard as well.
I have heard that Win 10 is disabling or disconnecting USB ports to save power for tablets and such. Understandable for limited power availability but for PCs where power is always available this seems misguided.
I need to know if this is by design or can it be selected off via registry option.
In win7 and win8.1, i could set the screen of my tablet (Lenovo Miix3) to switch off after 3 min (not sleep, just switch off the screen). Tapping the touchscreen would bring it immediately to life again.
With win10, this does not happen. I need to click the on/off button to bring up the screen. So, it seems that Win10 switches off the touchscreen electronics. This is not a hardware issue, because previous Windows versions would let me switch off the touchscreen backlight but retain its sensitivity to touch (and therefore switching on upon tapping).
What do I need to do to restore the standard behavior (tappable touchscreen after switchoff) in Win10?
My touch screen randomly won't work, only to find that it's disabled in Device Manager. "USB Input Device" is what it shows up as. I believe it's a software I have installed that may be interfering.
Today I updated my laptop to latest build of windows. After that I found "No Audio Output Device Is Installed" message. I reinstalled audio drivers from Dell (Audio_Driver_PKGMR_WN32_6.0.1.7564_A01) Still no sound. I checked device manager it shows, Other Devices-High Definition Auduio-PCI Device, both have exclamation mark in yellow triangle. (See attachment) I am puzzled what should I do next.
Since upgrading to Windows 10 when ever I launch a game my wireless card gets disabled and is not enabled until I exit the game. I have tried updating drivers for the card and the graphics card and nothing has worked.
Graphics - Dual graphics Intel and Nvidia GTX860m (Drivers: 355.60)
Upgraded (???) a Windows 8 machine (HP with MS ergonomic keyboard) to Windows 10 a couple of months ago. It seemed to work, but most of the apps didn't work, and I couldn't access files as Administrator. this week I upgraded (???) a Lovono using Windows 7 to Windows 10. They are networked with printers and other computers via ethernet. Thursday afternoon the HP stopped recognizing key strokes. It allows password input on restart, but will not type anything else. It clicks like the buffer is full. Yesterday the Lovono started doing the same thing. My first thought was virus, although McAfee runs constantly on both machines. Used Malwarebytes on both and found a few PUPs, but no malware or virus. One forum suggested using DriverWizz, but it didn't change the keyboard driver. The Windows 7 computer on the same network, sharing files with both, is unaffected as yet. I'm thinking the solution will be to junk Windows 10 and go back to 7 and 8. If Windows 10 were a Vacuum Cleaner it would be terrific, but sucking like this is not all that terrific for an OpSys.
I have upgraded to windows 10 about a week ago but everytime I turn my pc on, it says HVECK is not supported by this OS. My audio driver is VIA High Definition Audio driver. It seems like they dont have an updated driver for windows 10. What do I do? Can I change to Realtek instead of VIA? I mean is that possible to use a different audio driver? Like, uninstall VIA completely and install Realtek?
I'm using a Surface Pro 2. After my upgrade from Windows 8.1 to Windows 10, I'm not getting any audio out from the DisplayPort. I use DisplayPort to HDMI to a receiver. I've upgraded to the latest RealTek audio drivers, but it's not working. Could there be a different driver issue at play?
