I am trying to upgrade a Gateway DX4870 from windows 8 to windows 10. I found a BIOS upgrade at Drivers & Downloads
labeled Gateway BIOS - UEFI for Windows 8 (Not for Upgrades) P11.B1 2014/04/03
I am not sure what this upgrade does and whether the update should be installed.
i got a friend who is having problems up-grading from 8.1 to W-10 ! It's a Asus Gaming computer he tried this link >>> Windows 10 <<< So he sent me this message "Tried running the Windows 10 upgrade its saying BIOS isn't supported" !!
View 8 RepliesI just did a complete upgrade of my PC replacing motherboard, video card, processor and power supply but keeping original hard drives. I did a fresh install of Windows 7 and then upgraded to Windows 10 soon after completely smoothly with no issues. My boot drive and external survived, but for some reason, even though it was handled with great care, my other SATA hard drive doesn't appear anywhere anymore. I can hear it spin when I boot the PC but it doesn't appear in BIOS or in Disk Management. I changed the cable and the port it was plugged into but no dice.
If it is indeed dead...what are my options in recovering the files? It is essential I get these files back!
It kind of worked on and off when plugged into my brother's PC which uses a different make of motherboard...
I'm currently trying to upgrade my Windows 7 computer to Windows 10. My attempt at upgrading to Windows 10 fail time after time. That's when i remembered I didn't install the optional update KB3064209 .Unfortunately, the infamous "death loop" happens when I do install; this only happens for Pentium G3258 users which I happen to be one. So to fix this I found out Asrock, my motherboard is the Asrock B85 Anniversary, released a bios update that says it's for the "update microcode 19". This happens to be what KB3064209 is... a microcode update.
Link to new bios (it is the version 1.40): [URL] .....
The question is should I flash my bios for this situation? After all the warnings I've read about never flashing bios unless something is a catastrophe?
I currently own a Dell Inspiron N5110 laptop with Windows 7 installed, but just received the last part to build my own desktop today! I'm looking to get Windows 10 on my new PC.I recently received the "Get Windows 10" button in the toolbar on my laptop, but when I click on it, it says I can't upgrade to Windows 10 because "the BIOS isn't supported".
However, I don't really want Windows 10 on my laptop; I'd much rather have it on my new desktop. So, my first question: is there a way that I can download a bootable Windows 10 file to my current laptop, transfer to a flash drive, and use that to install Windows 10 on my new PC right out of the box, all for free?
So my next question is: will buying and downloading the version of Windows 8.1 Pro in the above link work for my situation? That is, is it a full install in the sense that I will be able to make it a bootable file on my flash drive to install on my new PC? I believe I would have to download a Windows 8 ISO file to start.
My last question: is there an easier alternative to getting Windows 10 on my new PC, and if so, what is it? I think I can download Windows 10 here: URL... I'm not quite sure how that process would work either.
When running windows 7, for the first few seconds upon booting my laptop, it would display a startup message,
"Press ESC for boot selection, F2 for setup, etc......."
Now, nothing. I cannot choose to enter setup, BIOS, get to ESC for a boot selection screen in case I might want to boot from a flash drive or a floppy just once. How to get it back either.
Before i upgrade to windows 10 from 7, do i need to update the BIOS? I have heard a lot of things can go wrong like the motherboard can get bricked.
Currently my bios version is 0805 (06/01/2014). The latest version is 2306.
Motherboard: Asus B85M-E
CPU: i5-4590
GPU: Asus Radeon R9 270 2GB
I've trying to update an Advent netbook to windows 10 from 7. It's been a hassle all the way with hangs on 'checking for updates'. However, I got through that but now it's stuck on 'Get going fast' screen.
I had selected 'use express settings' and now it's stuck on that screen. The mouse still works but nothing happens. I left it on all night. It's still on the 'get going fast' screen.
If I reboot (even remove battery) I get the initial advent boot screen but no bios info. Del, f12, f11, f2 etc do nothing. The blue 'win 10' logo appears briefly then back to the 'get going fast' screen.
I also tried the usb flash drive that had the old os on it but it won't boot from it despite that being the initial boot setting in the bios. Has win 10 bricked my netbook?
I have the BIOS setting to auto power on every day at a designated time. It has worked with a dual boot Win 7/8.1 system. However, since upgrading the Win 8.1 to Win 10 (dual boot Win 7/10) it no longer powers on at the designated time. Its still set up correctly in the BIOS.
This is apparently not the "fast boot" option that was in Win 8.1 as I can access the BIOS on power on (couldn't with the Win 8 fast boot).
I have an Asus AiO ET2221A upgraded from Win8.1 to 10 3 months ago, and today only boots into the EUFI BIOS screen. There are no errors reported on Boot, just the BIOS screen
I was able to run Memtest from a DVD - fine, but couldn't boot into Hirens on USB or DVD. The BIOS does list the hdd partitions, plus I can search the hdd partitions/folders from within BIOS(!!).
I did remove and run Chkldsk on anther PC which showed/replaced several errors (20 bad sectors). I also loaded the latest BIOS download onto the hdd which in theory I can access from within BIOS. However after replacing the hdd after the chkdsk repair, it still wouldn't boot into Windows.
I am surprised as I would expect the BIOS to report it can't find the Windows (if it is the disk), rather than stick in BIOS without any diagnostics.
So I am still in a quandary as to whether this is a BIOS issue and/or a HDD issue, plus by upgrading from 8.1 to 10 the latter usually corrupts the Windows (8.1) recovery partition.
I am no expert on EUFI BIOS, but I understand that the Windows License is stored within the BIOS. If I try and re-install the BIOS is the license retained? And from that could I also re-install WIndows 10 from a download?
Edit: since posting I have got the system to boot into Hirens, but as soon as XP starts to load it turns off the USB mouse/keyboard so becomes useless. All I did was to switch off secure boot, and specify the boot order, either optical or USB. Progress but not sure what it tells me, or how I can get the usb mouse to work in Hirens in a eufi system (not had this issue before with non-eufi systems).
Have a Lenovo H420 desktop that was upgraded about 2 months ago. We backed up everything and want to reinstall Windows 7.
But I can find no way to get into the Setup screen. I've gone to Settings, Update & Security, Advanced Startup and Restart Now. But I have no option to Use a Device. If I choose Troubleshoot then Advanced Options, the subsequent screen has no option for UEFI Firmware Settings.
I've disabled Fast Boot through Power Options in the Control Panel, then tried F2 and the Delete key when starting. Nothing...
The fact that I can't do something that was so easy in Windows 7 is enough reason in itself to remove 10. Throw in the fact that the scanner part of my printer no longer works is just icing on the cake. I have the Windows 7 disk. I just can't figure out how to use it.
Yesterday I got a notification that my windows 10 upgrade was ready on my MSI GT60-0NE laptop and decided to give it a try because I really disliked windows 8.1. Windows update went through downloading the files and preparing the computer for installation. It then did the usual, configuring updates on the blue screen, got to 100% and just shut down completely. I left it there for about 5 minutes and decided to try to power it back on. When turning the computer back on, it stayed on for about a minute and then cut itself back off.
After waiting a minute it turned back on, then back off again. It kept repeating this for about 5 minutes. During this phase I saw absolutely nothing on the screen, no MSI loading splash screen, no cursor, absolutely nothing at all. I couldn't enter the BIOS, couldn't run recovery or even get into safe mode. Absolutely nothing worked. The battery light was also flashing blue which I had never seen before. During this time the hard drive light was flashing and flickering the usual red light.
I did a hard reset on the computer and then turned it back on. When i powered it back on the screen was still completely blank, no MSI splash screen, no cursors, couldn't enter the BIOS or anything. During this time the hard drive light was a steady red. The blue battery light was no longer there and it was back to its usual constant red light. After about 10 minutes the computer turned itself off. Being frustrated I left it overnight and tried again this morning.
When I power the computer on now, there is no hard drive light. It doesn't even give a single flash of red. The computer will stay on but just stays there at the black screen. I've tried to look for solutions but I can't get anything to work. The only thing I can hear running is the fan.
I've tried to remove the hard drive and boot to see if I could get into bios, still a black screen.
I've tried removing the video card and booting to see if I could get anything through integrated graphics, still a black screen.
I've tried to plug the computer into another monitor, still a black screen but it does recognize the signal.
Specs for the GT60-0NE 403-US:
Intel Core i7 3630QM (2.40 GHz)
Nvidia GTX 680M (4GB)
Windows 8.1 64-bit (Windows 10 now?)
Is there a way to reflash the BIOS? Its important that I do this.
View 9 RepliesMy System Specs: available
i cant find "UEFI FirmWare Settings"
So my asus ranger vii m/b settings aren't stopping. The external samsung M3 portable HD from interfering .
So keep getting the error:
bootmnger not found error
CTRL-ALT-DELETE required
Needless to say samsung and asus aren't supporting...
My numlock key used to be preset after a computer restart or reboot, now it has to be manually pressed before the number key section and led indication is operational. I have checked and it is selected on in my bios settings.
View 1 RepliesOk i have a pc and a dell laptop that upgraded fine. My gateway has not upgraded past 10061 , i tried doing a reset and it just reinstalled 10061 with the same problem.
View 2 RepliesI am using "Broadcom NetLink Gigabit Ethernet 15.6.0.14" on "Acer Aspire E1-571G" in Windows 10 OS.Since few days my internet connection is getting dropped when i troubbleshoot it fixes immediately showing "Problem Found-Default gateway is not available-Fixed" and starts working for 10 sec,1 min or sometimes 1 hr then again this problem.
Sometimes shows "Driver Power State Failure" error
My roomie has same laptop and same connection but no issues. And even if i disconnect the wire it keeps showing connected icon in taskbar. What I have tried already,
1.reset ip/tcp
2.Set ip adress manually.
3.Try to update driver from device manager says using best driver.
4.Reset my laptop.
5.Updated BIOS.
6.Unchecked "Allow the computer to turn off this device to save power" in device manager.
But problem still continues...
Today my keyboard stopped working, there was a usb error message pop up but i didn't realise what it was about, then then my k70 corsair keyboard stopped working, i tried restarting and doing an sfc scan but nothing changed, then i started looking into device manager but all the drivers were up to date so i tried reinstalling the HID keyboard driver but nothing changed, i then looked into the event viewer and found the issue (attached screenshot)
View 5 RepliesMy Gateway N522 laptop's touchpad is not working. I have had pc cleaned and updated to no avail. I'm currently accessing using USB mouse, which is not very practical for a laptop. How to get touchpad back working?
View 6 RepliesI've just added a 2nd HD to my Dell system with Win 10. It shows in the BIOS and Seagate tools finds it. It does not show up in Device manager or Computer Management/Storage - Disc Management or anywhere. Not sure if this si Won 10 specific.
View 2 RepliesI just upgraded my desktop to 10 Pro and lost the internet connection. The wireless network appears to be working OK. When I run the diagnostic it produces this message.
"The default gateway is not available"...
I recently got a new laptop and I've been having trouble with connecting to the internet. Several times a day, internet pages will stop loading and Windows diagnostics will come up with the message "The default gateway is not available". This is fixed by resetting the Wifi adapter. I've contacted my ISP and they say that there's nothing wrong with my connection so I'm guessing it's either something wrong with my laptop or the router.
View 7 RepliesI'm having some troubles with my VPN at the moment, and customer supports staff has told me to "change your default gateway / network DHCP range in your router to..." How do I do this?
View 1 RepliesI have installed Windows10 on a Gateway FX530 desktop PC. All has gone well with one exception. The OS seems to recognize that there is a card reader attached, I can see them through Device manager. When I insert a SD card the system completely ignores the device and will not allow me to access it. I have tried to change the drivers, without success. This card reader worked just fine with Windows 7 Pro and there was no indication that they would not work with Windows 10 when I ran the upgrade test.
View 2 Repliessince upgrading to Win 10 the Synaptics PS/2 touchpad will not scroll. I have rolled back the driver - didnt work, reinstalled the latest driver (15/7/15) -didnt work, all the relevant check boxes in device setting are enabled. (HP Pavilion dv7 Notebook PC)
View 4 Replies