I have a Samsung laptop. I had Windows 10 for about 2 weeks and everything was fine until last week. When I press the power button, the Windows 10 icon appears with the loading icon. After that, I'm getting a black screen for about 3 minutes then my login screen appears and everything is fine after that.I thought it may be something corrupted with my OS so I decided to reinstall Windows 10 from scratch and not to keep my files and programs. I found out yesterday that this wasn't the solution to my problem because I reinstalled it and it keeps making it again.
If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have one more monitor connected than you actually have. so when windows loads its outputting the video signal to a bogus monitor.firstly wait long enough so the mouse cursor to appear when you move the mouse.(blank screen with a white mouse cursor).Then press the space-bar and enter your login password or pin (yes your doing this blind)
You should now be logged into windows.if the desktop dose not appear after 30 seconds then press WindowsKey-P down arrow twice and enter.
I was using Windows 7 for about 2 years until I stumbled upon Windows 10 last month.I upgraded to it and used it happily for 2 weeks,give or take.Then the problems occur.
One day,after loading to BIOS,it booted to a black screen.No login screen,no cursor,nothing.I tried using the Windows troubleshooting utility and I've exhausted every option besides the wipe all your data option.
I tried booting with cmd, but it didn't do anything.Resetting PC with files intact also did nothing.Startup repair was the same case.System restore did not let me roll back due to some technicality.
In the meantime,I've tried installing Windows 10 on my other HDD,only to face the same issue after I rebooted.The Windows Media USB also did not work.
I'm really out of options here as I need to get some of my files out from my Caviar Black before I reformat it if I have to.
EDIT:For context,I sold my SSD and got a Caviar Blue 1tb.
My PC has been acting up for about a week now. I have 2 Samsung 24inch Monitors and a decent gaming PC. I have tried all the options this forums has brought to me such as control alt delete and recovery mode, nothing has worked so far. I have just upgraded from 7-10 and it just wont start up without booting to that black screen.
I have a dell insperation and after having upgraded to windows 10, I came across a few issues. The update when well and windows 10 is working on my laptop, however, I have an issue where I am presented with a black screen when i start my computer. I do see a dell screen and a windows boot screen before it goes black so i know the issue is not a hardware issue, however after the windows boot screen passes (the one with the blueish window icon) the screen goes to black, but it is still on (meaning the monitor is still turned on just not displaying anything). The reason i know that windows installed fine is that external monitors do work, just not my laptop monitor. I have already reinstalled windows 10 and have made sure all my drivers are up to date. Windows 10 is just not recognizing my laptops screen as a usable monitor.
Today, Windows 10 decided to act up.When I turn on my computer, it boots my UEFI interface, the Windows 10 loading screen with the spinning dots and then a black screen with no cursor.
It's not my 7870 or monitor as I tried it using the motherboard graphics and my other monitor.
In Windows 10's troubleshooting menu, System Restore won't work because of some file being deleted.Startup Repair requires a successful boot to enable Safe Mode, which I can't.Resetting with all files intact gives me the same result.Rolling back to Windows 7 is impossible due to Windows 10 deleting all my Windows 7 files.
What do I do aside from formatting?I need the files inside that HDD.
My laptop is running windows 10 32bit pro and ever since upgrading, the computer boots to a black screen but there are other times it will boot up correctly....
What does it mean when you see a black screen that has a grey flashing dash located at the top left-hand corner of the screen? It moves down a bit before finally moving onto the Windows 10 logo, where it sometimes gets stuck and reboots (and the grey dash screen appears again before moving on).
I noticed this issue both during upgrade (when it failed and tried to recover the installation) and after installation. This issue occurred on an Acer Aspire Z5801. It does not occur on Windows 7.
I recently upgraded to window 10 from window 7 with iso file. I didn't had internet access then, but my window run successfully. Later, when i tried to attach another display with Laptop it did not detect it. So, i installed the windows updates. But after installing i was unable to boot into windows. A black screen with blinking cursor appears right after the Dell Logo. I am only able to go into bios setup by pressing F2, no safe mode option. I tried making a bootable Pen drive for repair but even it wasn't detected. I already change the boot priority in bios menu. Therefore i am unable to fresh install the window as laptop cd drive is not functioning from quite some time.
I installed Windows 10 yesterday but had to return back to Win 7 because the driver problems crashed the whole system. Basically what happened was that I was stuck at black screen after every boot and got back only when going to sleep-mode through power button and back.
I tried to uninstall all graphic drivers but it doesn't really work when Windows is reinstalling them immediately. I though that I would only use my Nvidia and downloaded the latest drivers and after that disconnect from Internet but the driver installation just crashed the whole system. When I rebooted it crashed again so only thing I could do was to boot in safe mode and go back to Win 7.
I did a clean install of Windows 10 and, because of problems with installation,I disconnected all unnecessary DVD drives and expansion cards etc. I decided to reconnect my DVD drives today to two spare ports on the mobo but, when I started the computer I got a black screen with two strange symbols before Windows attempted to start. The computer just hangs on the black screen. I tried disconnecting the drives in turn, different SATA cables and even starting in safe mode but the result is the same - black screen with strange symbols immediately after POST.
This topic i.e. "Laptop Switched Off but Inside HDD or CPU still On" is on the internet in almost all forums and i have browsed and surfed 50 of the key ones but none have offered a proper solution or maybe it is not working for my laptop.
I have a Dell Inspiron 3542 Laptop with a Core i5 CPU, Nvidia Ge Froce graphic card and 4 GB Ram. It came with preinstalled windows 8.1 64 bit OS which was upgraded to windows 10 64 bit OS.
The issue has started after the upgrade to windows 10.
Even after switching off the laptop, the screen goes black but inside the laptop either the HDD or CPU or something remains on. I formatted and did a clean install and installed all DELL drivers in the perfect order.... No change! The problem still persists. i have the latest Bios as Dell drivers check.
My Screen is displaying off center to the right just a little. I only found one other mention of this on another forum with no solution. There is a black strip on the left hand side of my screen. The other post was on a MS forum they theorized it had to do with the Intel HD device driver. I did not have this problem with Windows7. Hope the graphic card I have coming will fix this.
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
My pc which i recently upgraded to windows 10 a few months ago without any issues, now its not booting up windows. It starts and i can access the bios page but after that i get a black screen with a blinking small dash/line.
I recently purchased G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBXL for my computer. I ran a memory test with memtest86+ and my old memory had 175 errors, which is not good. So I purchased the new ram, but when I installed it in my computer, the system turns on but Windows 10 will not boot.
Does this mean that the RAM is bad? I know that it's compatible because I narrowed my search down on NewEgg to RAM that was compatible with my motherboard. The one thing that I did notice is that my motherboard's manual says that it's compatible with 2 sticks of DRAM and the RAM that I purchased is SDRAM.
I currently have a Windows 10 laptop that was working without issues for a while, however after a restart the laptop appears to load windows but never get to the login screen, only show a blank screen with only a mouse icon visible.
I have tried various Windows supplied options with the following outputs:
1. Boot into safe mode (with and without network) - this again only loads to a blank screen with only mouse icon visible 2. Window reset - appears to get stuck on 8% - only to show an error saying reset could not happen, reverting changes (option to reset with files saved was chosen - as current files are required) 3. Start Up Repair - issue not resolved 4. System Restore and System Image Recovery - N/A as Windows cannot find previous image or restore point 5. Booted in Low-Resolution video - again same
My heatsink was very Dusty. So today I removed it, cleaned it and reapplied thermal paste after cleaning the top of processor. I did pull the leaver to clean but I didn't remove processor.
I accidentally broke one of the lock pin while placing the heatsink. But still other pins are holding it perfectly. I also plugged the fan connector currently.
After doing all this my pc is not booting I can hear the fans running and there is the green light, but there is no orange light which used to blink before. Is there any power supply problem and if there is then how to solve it?
The problem comes about after using the online feedback form that comes with Windows 10. The feedback form requires that the user log in before posting. However it does not appear to give the user the option to log out again. For some unknown reason, whenever I have used the feedback app then shut down the computer and rebooted, Windows boots to the calendar screen. When I click on that screen it changes to the dark blue password login screen and asks me for my password. I have never had a password!
I was so thrown by this last time it happened that I did not consider that it was asking me for my online Microsoft password. But this is exactly what it wants. This time I typed in my online Microsoft password and hey presto it continued to boot to Windows. The problem is I am now stuck in an infinite loop of having to click on a calendar screen and enter the password every time I boot up.
It seems that Windows 10 is somehow confusing my online password with an offline password and is expecting the online password to be entered offline in order to log in.
Any way to log out of Microsoft feedback app permanently? I tried going online and logging in and out of the Microsoft webpage, but this did not solve the problem. I do not want a password to log in. I just want Windows to boot to the main screen as it did before.
I have a Lenovo P580 laptop. The screen wire got shorted out, so I just always connected it to a TV and never really had a problem. I recently upgraded to Windows 10 from 8.1. After getting that issue with the start menu and cortana not working, I tried the make another profile, etc stuff from the internet. I changed my laptop to always load into safe mode using command prompt... NOW, every time it loads up, it loads into safe mode... only problem is I can't see it or do anything because the output for my tv doesn't work.
So... I bought a new wire for the laptop screen... nothing. Bought a new screen... nothing. So I assume the motherboard is damaged... The HDMI and VGA ports worked up till I set it to boot into safe mode...
Is there anything I can do? short of replacing the motherboard?
I recently upgraded to Version 1511 of Windows 10 Home. I have been using it for almost a week without problems, but all of a sudden this morning it is booting to a picture screen showing the date and time.
When I click on the screen it changes to a password page. The thing is I have never had a password. I have tried leaving it blank and clicking OK, but it will not accept this. So I am in effect being shut out of Windows. How can I get back to Windows?
Updated to 10 and it's been working ok but now after booting up and getting to the home screen with task bar I can not get the main window to open. If I open an app (left click opens the menu ok) ie Firefox it shows in the task bar and the small window appears but the main window will not open. It probably something simple but I am stuck.
Booting loop, shutting down before you can reach the bios. Originally a response on this topic: [URL] .....
I have the same Problem here with my gigabyte z97 hd3 v2 motherboard in my PC. I had this problem one time before, then I tested everything 'literately everything' and I was done with it after a week of testing. I did put everything together and turned it on.... It Worked ! but how ??? I don't know.
