Drivers/Hardware :: CD / DVD Drives Not Detected?
Feb 23, 2016
I've had this same issue on 3 computers I've upgraded to Windows 10 (which are the only three I've even needed to have a working disc drive on). Windows 10 will not show the disc drives anywhere. I've checked in the Device Manager and everywhere else I can look, but they don't ever show up. The drives and working and detected by the BIOS but not in Windows. I've already tired adding the popular EnumDevice1 registry value (the whole command is listed below) but it never works.
The registry key CMD command I've tried all 3 times: reg.exe add "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001
View 1 Replies
Similar Messages:
Dec 5, 2015
I have multiple hard drives on my machine with a power switch between the PSU and drive itself. None of these drives are boot drives except the drive that holds the OS. Yet, W10 will not see any of these drives just by turning on the power switch. I have to switch on the HDD, and then go through the whole startup process to get W10 to see it. External USB drives are seen straight away. I don't understand why this is as I can see no difference between this system, and switching on external eSATA drives on my old W7 machine which always worked OK ?
View 5 Replies
Aug 28, 2015
I updated my computer to Windows 10 Pro just few hours ago. I experienced some problems with the video drivers, but I solved them by updating the driver through nVidia GeForce Experience.
Now I have problems with my audio driver (which I think it is VIA HD Audio). My computer does not recognize my external microphone, only the internal one (which is not of the best quality). I looked for the drivers in the ASUS website, but I have found only outdated drivers for Windows 8. Then I saw the "sticky thread" on tenforums in this section and I tried to download the driver, but I do not want to mess up everything else as the site says:
Audio drivers available for download from the Realtek website are general drivers for our audio ICs, and may not offer the customizations made by your system/motherboard manufacturer. To be sure you obtain the full features/customizations provided in your original audio product, please download the latest drivers from your system/motherboard manufacturer's website.
So I'd like to find a good driver for my own PC (which is an ASUS G75).
In addition to it, it seems I have installed VIA HD Audio Control Panel, but I cannot access it because no window is shown when I start it.
View 2 Replies
Nov 15, 2015
Laptop: HP Pavilion Notebook - 17-f202na
I purchased this laptop some months ago using Windows 8.1. I had so many problems and hated the OS so much I upgraded to Windows 10. I have found that some devices I plug in via USB work just fine but some do not. It seems that the more sophisticated devices do not work.
I have a few HDDs from old laptops that I have put into caddies - these work fine connected by USB. However the following do not work at all when connected by USB.
* Nook Glowlight
* Samsung Galaxy S3
* Toshiba Stor.E HDD
* CBA Digital HDD
They all light up indicating that they are charging however there is no drive registered in This PC, nothing appears in Devices and Printers, nothing that I can find anywhere that indicates that the PC detects a thing. There are no error messages or notifications. This is true for all the USB ports.
I've tried a few things over the last few weeks for each device as I've learned that another doesn't connect but I think it might be best to start from scratch and assume nothing about how far I have got. I'm finding ways round connecting the Galaxy and there's nothing too pressing right now on the HDDs that I need to access.
View 6 Replies
Jan 14, 2016
I have a G35 headset and I plugged it in the back of my computer. Now, when I start Windows, its not detected until I re plug it in. Its only with this headset, nothing else too. The USB works because I re plug it in again and it detects again. My sound card is Realtek.
View 3 Replies
Jan 8, 2016
Usually when we plug in a SATA drive it will show up in explorer but it doesn't now after I install Windows 10 (clean install). It work well when I'm on Win 7.
I've check the BIOS it indicate all ports AHCI an I never change anything since Win 7. So what could be the problem? As I swap drives often this feature really important for me...
View 2 Replies
Jan 26, 2016
I have a Windows 7 PC with 3 DVD drives. Imgburn shows them as connected to 3 different SATA busses: [2:0:0], [3:0:0], and [4:0:0].
After upgrading to Windows 10, all of them ended up on the same bus, [2:0:0], like this:
Why did that change? I tried connecting them on different SATA plugs, but they are always shown on that [2:0:0] bus. The thing is, I really need them to be on different busses, because of a particular requirement of a legacy application I use.
View 4 Replies
Aug 22, 2015
Access is denied on both drives. Just upgraded about an hour ago and I've been looking for solutions but cant seem to find any that works for me. I'm only using one account and its a Local(Administrator) account. How to give full free unhindered access to everything. Since this is my laptop and no one is going to ever use it except for me.
View 1 Replies
Nov 16, 2015
Why my attached drives show twice? I only had this happen on one USB drive before the Windows 10 recent update, but now both external drives are repeated twice! (See attached)
View 3 Replies
Nov 28, 2015
So I have set up my SSD and using it for my OS (Win10) and my F drive (1TB HDD) as a drive for my programs and documents, however when I try to search for items vis Windows Start Menu it only shows items for my C drive, how to make it to search both drives for documents/files?
View 6 Replies
Jan 29, 2016
Lately, every flash drive I've bought requires to be NTFS formatted. Quick formatting gives me the option to change allocation size. Is there a specific size I should be using or just go small?
View 4 Replies
Sep 23, 2015
I have several hard drives on my PCs; some are physical, some are partitions. In every PC I've upgraded, W10 marks these as RO. I go through the ritual of setting permissions to Full and marking RW, but occasionally a drive will revert to RO. I can't find a Take Ownership option for drives, only folders. Am I looking in the wrong place?
View 6 Replies
Oct 10, 2015
I usually work with hidden files enabled, and would like to hide empty drives, but it seems my Win 10 Single Language doesn't have this feature, is this normal?
View 8 Replies
Aug 30, 2015
After I upgraded from Windows 7 Pro to Windows 10 Pro everything was fine on my desktop PC. Several days went by as I learned the new OS' interface. Then I got an update message telling me that a reboot was required for the updates to take effect. Blindly I went ahead and rebooted as requested. To my astonishment after I rebooted my two DVD drives were no longer recognized by Windows 10. Mind you, they were working just fine after my initial upgrade from 7 to 10.
I tried using the registry hacks I had seen on so many of these forums. None worked.
My only fix was to do a restore to a date & time previous to the update. (Just go to control panel, select recovery and then select open system restore.
View 3 Replies
Aug 6, 2015
Still checking out changes but most obvious is loss one of my drives. How to locate?
View 1 Replies
Nov 21, 2015
Yesterday I went from Windows 7 to windows 10 with a clean install.
My system based on an ASUS P9x79Pro motherboard has 4 internal disk drives.
The first two, a 500GB SSD for the system and a 2TB spinning disk, are connected to Intel SATA 6G ports and are fine.
I also have two further 2TB data drives attached to the Marvell SATA 6G ports. It is these that are looking unusual.
After installing windows I installed the Marvell driver from the ASUS website for windows 10. However Device manager does not show Marvell under Storage controllers
Both data drives connected to the Marvel controller appear under eject media as removable drives along with something called "Eject Marvell 91xx config"...
One of the data drives (but not the other) appears in File Explorer as a removable drive.
View 2 Replies
Oct 31, 2015
I did once manage to Partition in to 2 separate drives the Disk 2 - New Volume (G:) external drive
However I can not repeat that and instead I keep getting it split in to 3 partitions?
I only want 2 partitions 1 x 1TB + 1 x 2 TB
I am doing this on this system (Windows 10, 32 bit) Home edition, because my ACRONIS Total Image 2016 won't recognise a 3 TB drive.
BTW: I have two other registered Windows systems 1. Windows 10 Prof. & 2. Windows 7 Prof. both using 64 bit, that I don't have problems with.
Please see attched .jpeg image
View 9 Replies
Aug 17, 2015
I just upgraded from Windows 7 PRO to Windows 10. I notice that my external USB 3.0 drives can't be found. Before the upgrade it was ok. The only external device that does show is a Sandisk FIT USB 2.0 stick.
View 9 Replies
Jan 21, 2016
When I insert any removable drive (USB, SD cards, etc) the device shows up twice in Explorer. Once under "This PC" tree and the other as a device. See attached pic (USB Drive H):
I remember hearing about this being the way it's designed to work, but frankly it's a bit silly - I only need to see a single entry for the drive/device...
Is there any way to get rid of one of these entries without stuffing up some other Explorer feature?
View 3 Replies
Feb 10, 2016
I've done a reinstall of Windows 10 today. I unplugged my internal storage HDD's to isolate the SSD for the install, wiped the SSD, and reinstalled 10.
Now it's installed, I've plugged my 2 internal HDD's back in, started up Windows, and neither drives are showing. Neither in device manager or in Explorer. What could be the issue here, and how do I resolve it?
View 5 Replies
Oct 19, 2015
I have recently bought a 32gb micro sd card from eBay and was wondering if there is some kind of check I can do to make sure it has correct memory on it, I have heard that some of the sd, hard drives and flash cards from eBay are being faked and what looks like a 500gb hard drive people find out later that its just a 1gb flash drive inside with some kind of modded files in it that makes it look like a 500gb drive, upon transferring files they just delete anything past 1gb.
View 5 Replies
Sep 15, 2015
I did a clean install of Windows 10 and, because of problems with installation,I disconnected all unnecessary DVD drives and expansion cards etc. I decided to reconnect my DVD drives today to two spare ports on the mobo but, when I started the computer I got a black screen with two strange symbols before Windows attempted to start. The computer just hangs on the black screen. I tried disconnecting the drives in turn, different SATA cables and even starting in safe mode but the result is the same - black screen with strange symbols immediately after POST.
View 1 Replies
Oct 4, 2015
What that page is called, but when I want to change save locations, none of my drives show up. It worked before but now it just doesn't want to display anything sadly. Here are a few pictures of what I am talking about.
My drives wont show up in this section either...
The thing is though, they display properly in the "This PC" Section so I know they are plugged in correctly.
View 7 Replies
Jun 5, 2015
In recent weeks, it has become impossible for me to safely remove my external drives. (Mostly, I use Western Digital Passports, Passport Ultras, etc).
I am using Windows 10.
I close all of my programs and folders. I get the "busy" message and to try again later. I run Unlocker on the drives, and Unlocker shows no activity or actions that I can take. I bring up my task manager and nothing is running. I try to safely eject from the WD utility and it doesn't work. I try to eject by going to my computer, right clicking on the drive, and ejecting from there. Sometimes I simply wait for half an hour, read some articles, try again. I get the same "busy" or can't shut down message.
I read online that I could try to Device Manager, click on the drive, and under policies select "Optimize for Performance." However, the computer must restart for changes to take place, and when i've tried, I get stuck on an infinite "Restarting" screen.
I read somewhere that I can try to empty a hidden recycle bin on my external, but I can't seem to reveal it?
View 9 Replies
Jun 15, 2015
Getting ready to move from Win 7-64 to Win 10-64 when 10 is available next month. It's my understanding that Win 10 will not install over Win 7 so I'd like to install a new 250Gb SSD (I currently have Win 7 on a 128Gb SSD as C: ) for a clean install on it. Once all my files & software are transferred I'll keep the current 128Gb SSD as an extra drive.
So, are all SSD Hard Drives created equal? I'm looking at NewEgg & the prices are all over the place. My current SSD is a Cruicial 128Gb which has worked 4 yrs flawlessly.
View 9 Replies
Dec 22, 2015
My HP Pavilion all-in-one computer does not recognize my Seagate external hard drive after I installed Windows 10. Everything worked well with the Windows 8 but neither system will recognize the other once I upgraded to Windows 10.
View 2 Replies
