Drivers/Hardware :: Can't Disable Touchpad
Sep 28, 2015
I do not like the touch pad. When I had Windows 8.1, I simply disabled it. But Windows 10 has a mind of it's own. I go into settings for touch pad and put a check mark where it says "disable touch pad". But as soon as I restart, the touch is enabled. I go where I put the check mark and it's gone--Windows just un-checked it. There are a couple of places where I can disable it, but upon restarting it goes back to where it was. I even went in Device Manager and disabled it there, but the same thing happens.
View 9 Replies
Similar Messages:
Sep 12, 2015
I understand i have asked this before, but my touchpad still refuses to disable. i have tried 5 different versions of the synaptics driver, and i believe im currently running on the best version (according to my laptop). If I go to control panel and disable it from there its still no luck. its making me regret my decision to update as it worked perfectly before.
View 6 Replies
Sep 3, 2015
In June a friend bought a Lenovo Z50-70 laptop running Win 8.1. He particularly dislikes touchpads so uses a mouse. In 8.1 I was able to disable the touchpad for him, via Device Manager. He's now updated to Win 10 and the touchpad has come back to life. I've been trying to disable it again, so far without success.
In "Settings", the only option under touchpad is to alter the delay on using "click". I went to Control Panel.
In "Device Manager > Mice and other pointing devices" there are only two options, "HID-compliant mouse" (which has a disable option) and "Lenovo Pointing Device", which I assume refers to the touch pad (is this assumption right?) and which can be uninstalled but has no "disable" option.
In "Device Manager > Human Interface Devices" amongst other things there are two entries both named "HID-compliant vendor-defined device". Both can potentially be disabled, but without further knowledge I'm disinclined to disable them in case I inadvertently disable the mouse in the process.
View 3 Replies
Aug 27, 2015
Prior to installing Windows 10, I would disable the touchpad on my PC (hate it!) by going to Settings - Mouse Properties - ELAN - Stop Device. Since installing Windows 10, the ELAN device does not show up under devices and I cannot disable.
View 1 Replies
Feb 3, 2016
Prior to the windows 10 upgrade I had my mouse settings such that when a USB mouse was plugged in the touchpad was disabled. In window 10, the functionality is still available however now I have to manually change the settings each time I turn on my laptop.
View 1 Replies
Sep 22, 2015
I have a Toshiba Satellite laptop. It kept prompting me to upgrade to Windows 10, so I did so. Now the button that disables my touchpad (also the F5 button) is not working. The touchpad will not turn off.
Secondly, when I try to move the cursor, the "right click" menu pops up wherever the cursor lands, and it will not let me type. I have to use an external mouse to click out of the menu, then put the cursor back where I wanted it to land.
How can I make the disable button on my keyboard work again, and how can I fix the mouse so that the right click menu only comes up if I actually right click?
View 5 Replies
Nov 6, 2015
I just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.
View 2 Replies
Aug 14, 2015
since upgrading to Win 10 the Synaptics PS/2 touchpad will not scroll. I have rolled back the driver - didnt work, reinstalled the latest driver (15/7/15) -didnt work, all the relevant check boxes in device setting are enabled. (HP Pavilion dv7 Notebook PC)
View 4 Replies
Sep 1, 2015
On my Dell Alienware m14x it seems that I can not find a way to disable the feature that enables a delay between the time you can click or move on the touchpad to when you can press a key. Meaning, if I quickly stop typing and attempt to move my touchpad, I must wait a couple of seconds before my touchpad enables itself again. This feature was added to stop people from accidentally pressing the pad while typing.
View 2 Replies
Mar 5, 2016
OK so now if my touchpad is switched on the mouse cursor sometimes makes continuous erratic movements around the screen. Turning it off solves this problem. Is this a sign it's wearing out,
View 2 Replies
Jan 18, 2016
I have an Advent Monza S200 laptop. I've recently upgraded to Windows 10. Before I upgraded my touch pad was working fine, but after the upgrade my touch pad stopped working.
Once my laptop is turned on, the cursor is not visable on the screen, the touch pad is unresponsive too. If I plug in an external mouse, the cursor re-appears and I can control my computer that way, although as soon as I un-connect my external mouse the cursor stays on the screen but I can't control it with the touch pad.
I can un-install the touch pad drivers, then re-install them from the Advent webpage and the touch pad will work perfectly until I turn my laptop off, then when I switch my laptop back on, I'm back to square one again and can't do anything unless I plug in my external mouse.
I've tried asking on the Advent forums but they don't seem to have had any traffic since early 2013.
View 1 Replies
Nov 5, 2015
I installed the new Win 10 home and now I'm unable to deactivate the touchpad. I tried to fix it in system controls and of course by "alt+F9" but nothing works... or elseway, it still works.
View 4 Replies
Jul 9, 2015
I just upgraded my windows 7 original install on my Toshiba Laptop (3 years old) to the Windows 10 Home Preview Build (10130 was installed). Everything appears to be working EXCEPT my touchpad will not scroll. It is a Synaptics V7.5 on PS-2 port. I went to the Synaptics website and don't see a windows 10 driver for this...How can i get the scrolling to work on the touchpad (everything else seems to be working on the pad)..
View 9 Replies
Aug 6, 2015
After upgrading to windows 10 my touchpad was not working, after googling around i saw someone say that windows 10 turns it off by default so i went through the device manager and turned it back on but now it is unable to click on anything and i can't use the two finger scroll thing that i use to be able to.
View 1 Replies
Jan 17, 2016
The left button on my touchpad developed a hard to describe malfunction. Turning on right-handed mode improved the functionality, but accidentally clicking the left button creates a complicated, frustrating situated which can usually only be resolved by restarting. Is there something in the settings or the registry which can disable the button until I get it fixed?
View 1 Replies
Jul 31, 2015
i just upgraded to Windows 10, and everything is working fine exept for my Elan touchpad.
I have never experienced it not working for Windows 8.
View 9 Replies
Jul 29, 2015
I just updated my win7 to win10, despite several negligible issues, so far I'm rather content about it. I browsed several options, lurked around settings, internet, friends- no straight forward method found. So, how to set the touchpad back, to behave as it used to in win7? My laptop does not have touchscreen, therefore i have no need to use this built-in 'feature', which is no good for me at all.
View 5 Replies
Aug 31, 2015
I upgraded my Gateway NV570P laptop. As soon as the upgrade finished, the scrolling on my touch pad no longer worked. I checked the settings, and it is still set properly for the scrolling to work. I tried upgrading the drivers, but Gateway only has touchpad driver updates for Windows 8 not Windows 10 - I tried installing those updates anyway, but it didn't fix the problem.
View 2 Replies
Aug 14, 2015
Had a customer present their laptop for repair following Windows 10 upgrade, so wanted to post the solution here.
The device, a Toshiba Satelite Pro Touchpad had an issue where it appeared to hang on startup following upgrade to Windows 10. Investigation revealed that the issue was actually the Touchpad was becoming disabled due to a problem with the ELAN driver that Windows 10 had installed. I wound the driver back and everything was fine, then Windows 10 decided it had a better version of the driver and installed the bad one again. Solution was to wind back the driver again from 15.8.x.x to 13.8.x.x and disable automatic update of drivers to stop it being replaced again.
Clearly it is not ideal to disable the driver update capability, however if there are not sufficient checks and balances to ensure that the right driver is being installed it is going to create more problems that it is worth.
Microsoft Suggestion: It may be an idea to allow disabling driver update for individual driver basis.
View 1 Replies
Mar 31, 2015
Been reading here and using win 10 from the outset. On latest build, updated this morning. This Elan touchpad driver keeps coming in through windows update and it just screws up my touchpad more than anything. When it loads up I can no longer use right or left click functions on the touchpad. I can find no way to stop the update.
Is there any method for stopping a particular windows update from loading? I keep uninstalling it but it comes back all the time. I am on an Asus G750J laptop.
View 9 Replies
Nov 18, 2015
For the past few months, the right touchpad button does not work with the Windows 10 drivers. Windows 8.1 drivers worked fine. If I switch mouse settings to left handed, then the buttons work fine, but obviously this is awkward to get used to. I have rollbacked the driver to a very old edition and it worked fine, however then I had no synaptics touchpad settings so the touchpad settings could not be altered.
19.0.9.7 is the synaptics version
touchpad works fine on other user accounts
View 9 Replies
Oct 6, 2015
I updated my laptop(HP envy m6 notebook) a few days ago from windows 8.1 to 10 and since then my touchpad/pointer has been freezing for 4-5 seconds after I touch any button on the keypad. eg. if i hit enter then i cannot move the pointer for a few seconds.. I can still use the left and right click even while the pointer will not move.
Everything worked perfectly before i upgraded to windows 10 and everything else apart from the freezing mouse seems to be working just fine after the upgrade.
View 2 Replies
Jan 12, 2016
This has happened a lot since my upgrade to Windows 10, and it's really starting to get on my nerves. Seemingly randomly, my keyboard will stop responding to what I type, and my touchpad completely stops as well (no, I did not accidentally click to disable it). These problems will never resolve themselves on their own, but as soon as I reset the computer everything works again - to me, that sounded like a driver crash, but nope! I checked the driver menu and it told me everything was running just fine. What's even more strange is that I have the backlight keyboard enabled so that when I type, it lights up. And strangely, the keys still light up when I press them, so I know it's registering my typing SOME how.
You would also think that this would be a software problem since it fixes immediately upon reset, but I've noticed that this issue seems to crop up a lot right after I have moved my computer..
In order to possibly do testing on what is causing this (I've tried everything I can think of) I am purposely not resetting my computer (this is a touch screen, but this on-screen keyboard typing is obnoxious). Currently, both keyboard and touchpad don't work, but a usb mouse I use does (the computer is also set so that using the usb mouse does not disable the touchpad).
View 4 Replies
Sep 30, 2015
I just upgraded to Windows 10 and have discovered a problem that I can't seem to fix. When I Right-click on my Touchpad, nothing happens. This was very useful when I need to fix a word spelling & get options for the misspelled word.
I have an HP Pavilion using Synaptics Touchpad.
View 9 Replies
Feb 10, 2016
would be great if the right click on my synaptic touchpad worked. Was fine until I moved from win7 to win 10.
View 1 Replies
Dec 5, 2015
i have a acer aspire 1v , windows ten just updated with cortana in australia , since the update my touch pad has no options for two finger functions
when i was running windows 8.1 i had options for three finger functions , that went when i installed windows ten for the first time and i could only get two finger options available , now with the latest install there is only options for one finger functions
I am have synaptics pointing device but i though i had elan pointing device...
what is also weird is when i open the synaptics pointing device in the tray manager , i have an option for accessories with pressure graph and moonpad options , not sure what they are but clicked on them and i get a message this option requires a synaptics pointing device and synaptics pointing device driver
I've tried device manager check driver update and it says working properly and driver is using the latest update.
View 2 Replies
