Drivers/Hardware :: Cannot Assign A Drive Letter
Nov 1, 2015
I have an external drive where the electronics of the case has failed. I have switched the drive into my pc so that I can use it as an internal drive. The drive is still operational but I cannot see it listed in my drives. Opening up disk manager shows the drive is clearly visible there but is no volume letters assigned to it. The easy option would be to delete the partitions and create new. However, the drive is divided into several partitions which I want to keep as they contain a lot of important data files (years of photos for one thing). Disk manager wont allow me to assign any drive letters (option is grayed out) and disk partition only shows me a single partition not the 5 partitions I have on the drive. how do I assign volume letters without losing my data?
View 3 Replies
Similar Messages:
Jan 8, 2016
I cannot assign a drive letter to a partition. When I right click the partition I only get the word "Help". The partition states as "Healthy (Recovery Partition).
View 9 Replies
Oct 24, 2015
I have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
View 6 Replies
Feb 10, 2016
How do I assign a range of letters, that can be used for e.g. external flash disks, external ssd's/hdd's or memory cards?
I have this nasty issue. I have two Network Attached Drives, on server. They work fine, D and E. But I also have NAS [DS 716+] which is on NAS drive F:. Whenever I shut down my DS 716+, and I connect some external hdd/ssd/memory card, it always asigns letter F:. Which makes these devices quiet inaccessible, or hard accessible, I can't double click them to open, I need to type in manually F: etc.
Is there any way via msc or something, where I can define a range of all external hdd's/ssd's and/or memory cards?
View 8 Replies
Nov 4, 2015
I tried the Windows 10 upgrade when it first came out and immediately went back to 8.1 when I couldn't get a single one of my internal SATA hard drives to mount.. I have 5 of them, and I just wasn't about to mess with that when 8.1 had no problems at all. Now I have tried it again and the same problem is happening. I want to see if I can figure it out this time. I am using the latest SATA and Chipset drivers for Win10 64 bit from Gigabyte's Website (I am using a Gigabyte Z77X-UD5H Rev. 1.1.
I am "testing" Win10 using a bootable clone of my main SSD (that still has 8.1 on it) and I upgraded it to 10 just to mess with so I can figure out this ridiculous problem.
My problem is that all of my internal SATA hard drives (with the exception of the system drive) cannot be assigned a drive letter in Disk Management. They show as healthy NTFS partitions but I get 1 of 2 different errors when I click on "Change Drive letters and Paths":
1. "Virtual Disk Manager: The System cannot find the file specified."
2 "Disk Management: The operation filed to complete because the Disk Management Console view is not up-to date. Refresh the view by using the refresh task. If the problem persists close the Disk Management console, then restart disk management or restart the computer" Hint: none of the recommended fixes in the error message change anything.
I HAVE been able to assign the partitions a letter and mount them using a third party disk manager called "MiniTool Partition Wizard". It lets me mount the partitions and it works! ..However, if I restart the computer, I am back to square one and have to manually assign each drive letter for each partition every time.
This is easily the worst experience I have ever had upgrading an OS, and one of the most mind boggling issues I have had with Windows in general. I really like Windows 10 and want to keep using it but half of my hard drives being un-mountable is a complete deal breaker right now.
View 9 Replies
Dec 23, 2015
I have a situation where I need drives F and G available for scheduled file backups, and I like to play a game which involves mounting an ISO as a virtual drive, which would normally become F. Earlier today, I discovered a way to keep F and G available by creating to small ISOs and putting shortcuts to them in the startup folder. Then at backup time, I can just unmount drives F and G and plug in the flash drives. That seems to work fine, but since it seems a bit awkward to create ISOs just for that purpose, I was wondering whether there might be another way.
View 2 Replies
Nov 3, 2015
Still learning Win 10 ways! I have installed a WD My Book backup drive, and Win 10 gave it the designation of my "G" drive. How do I change from "G" to a different unused letter?
View 3 Replies
Sep 5, 2015
After the store where I bought my pc from repaired my pc (seems like it was a drivers issue) it came back with disk F (the ssd) renamed to C, so now all my shortcuts on the favourites say this:
It's pretty annoying, I cant call them on a Saturday about the issue. I know they tried booting up with an external disk and that's why it's renamed, but I can't rename it back to F, I've tried it and it gives me an error because the disk is in use I think, I've also tried using MiniTool Partition Wizard Free and the optiong to change disk letter disappears when I click on the one I need changed..
View 2 Replies
Aug 11, 2015
No matter what I do Windows always labels my secondary TV screen as my PC screen and vice versa. It's not really a problem in terms of functionality but it does annoy me that I can't change it. I've been through countless televisions and GPU's over the years but it always remains so possibly there is a good reason for it?
Anyway, the 'issue' has been persistent since W7 (and possibly before?) but I'm wondering if there is now/or always has been a work around for this?
Edit: This post explains it better Changing monitor identities?
View 9 Replies
Aug 2, 2015
I have a Seagate SATA 500GB HD as a second HD. Windows 10 deletes the letter of the drive every time I reboot/turn off my PC, and I have to reassign the drive letter. Why is this happening and how to fix it?
View 1 Replies
Jun 17, 2015
I've installed W10 in my laptop in a dual boot configuration with W7 successfully. I used this tutorial Windows 10 - Dual Boot with Windows 7 or Windows 8 I'm setting up to do the same thing in my desktop and have a couple questions about drive letter designation after doing it. I created a 30G partition on the C drive of my desktop for the W10 install.
My laptop has one drive, the OS "C" drive, I created a another partition for W10, after installing W10 using the USB ISO "boot from USB" instruction when I'm in W10 it shows as the C drive, and the W7 partition is inactive D drive. Just the opposite when I'm in W7, it shows as the active C partition and W10 is the inactive D partition.
On my desktop I have the 120G C drive for W7, a 500G D drive for backups, a fixed CD-ROM E drive, and a virtual CD-ROM F drive. I've made a 30G partition on the C drive to install W10 on for the dual boot. The question is when the auto backup runs (I have it backup & image every Sunday at 7:00pm) it backs up the C drive to the D drive. Will the W10 dual boot install change my backup drive letter to something other than D, or will the non OS physical drives keep the same drive letter? I will have to remember to be in W7 for it to be the C drive when it backs up, but my concern was if the dual boot was going to change my backup drive to something other than D. That would affect the backup.
I've attached disk mgmt. below, FYI the G drive is the USB with the W10 ISO
View 1 Replies
Feb 20, 2016
When I go to disk management and right click on my # 2 HDD to give it a drive letter, it only shows Convert to Dynamic Disk, Properties and Help. change drive letter and paths does not show up ??.
View 1 Replies
Jan 27, 2016
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
View 3 Replies
Jan 6, 2016
I'm using static IP for Network #1 which is 192.168.1.110
But when I try joining another network let's say network #2 with a router address like 192.168.43.1 i have to change network settings and use another static IP 192.168.43.10
Can't i just ask windows to use static IP 192.168.1.110 when i try to connect to network #1 and 192.168.43.10 when I connect to network #2 without having to manually configure it every time ?
I really have to use static IPs when connecting to those two particular networks...
View 1 Replies
Oct 2, 2015
By default .cur and .ani cursor files are not associated with opening by any program, and a thumbnail of the pic contents is displayed in the file explorer icons. When I assign a program for opening the file (ThumbsPlus, ACDSee, RealWorld Cursor Editor, whatever), the contents thumbnail changes to that program's icon. No more thumbnail or preview in the pane either. The only way I can get the thumbnail to return is to go to settings and Reset all default apps (which de-assigns those file types back to no program association).
Workaround is I use the "open with" menu command and make SURE I uncheck the "Always use this app to open...." box.
This does not happen to .jpg, .png, .ico or any other graphic type file. They all show thumbnails no matter what the program association. Only .cur / .ani.
Is this something we live with in Win 10? ...or am I "special"? I don't remember seeing this on Win 7, XP or any in history.
The pic below shows the thumbnails with "Opens with: Unknown application". As soon as I assign, no more thumbnail...
View 2 Replies
Aug 16, 2015
It's extremely difficult to assign default programs (either no option for "default" or it just doesn't take my choice) for different media, but once assigned, Win10 later forgets the default program and opens it with another.I have assigned all audio file types (mp3, wav, m3u etc.) to open with Winamp. I've done this by manually assigning a default program for every single file type in "Control Panel - Default Programs - Associate a file type...", because every other option failed.
Later, after a reboot, it still shows "Winamp" in the list of file types. But Win10 now opens m3u-files with VLC player! I'm going hardcore, with registry keys etc - only need the info. some file types are not listed under "Control Panel - Default Programs - Associate a file type...". How can i assign these missing file types to a program?
View 2 Replies
Sep 9, 2015
When I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
View 9 Replies
Jan 14, 2016
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
View 2 Replies
Apr 14, 2016
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
View 9 Replies
Jan 9, 2016
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 Replies
Aug 30, 2015
Just sort of curious, I noticed that in disk management that I had 4 drives listed
C:
GAMES (H:)
STORAGE (F:)
HONDA AND VOLVO (D:)
But then there was another drive simply listed as "GAMES".
I always thought it was just some screw up and a duplicate of the H drive (since they both are named as "GAMES") which has games on it but the odd part was that it didn't have a drive letter associated with it after the upgrade to 10.
It was a listed drive in Windows 7 so wondering why the drive letter was removed during the Windows 10 upgrade.
View 2 Replies
Mar 30, 2016
I have one key working only when held down long enough (when it starts to spray that letter). Not an hardware problem.
Estonian keyboard layout. English keyboard layout works fine. Finnish keyboard layout has different key not working.
On-screen keyboard has same problem.
Problem started just one day. Before was fine. I have tried some malware scans, registry fixes, safe mode, keyboard driver reinstall, other keyboard.
Where could this problem be located? Registry? Someone in internet thinks its malware. I dont think I installed something new previous to that problem.
View 2 Replies
Jul 22, 2015
My main bug annoyance is when starting a new email, the first letter isn't auto cap.
View 2 Replies
Aug 5, 2015
Preparing upgrade to 10
Did clean install Window 7 to customize, sysprep, image, install on several duplicate PCs prior to upgrade
1st drive is SSD, 2nd is HDD
SSD partition c: os and d: virtual box
HDD e: data
wrote answer file move user and program data from c: to e:
Something happened post sysprep and partition letters switched d and e, I changed the drive letters in windows and now can't get into profile There is a shortcut to e on the d partition of SSD Tried reassigning letters using diskpart but they don't remain when entering windows but go back to the wrong assignment.
I googled this and apparently it happens but I don't know why. I can only think that I was lucky to image the clean OS however if I can fix this it would save me time. If not, I will get rid of the d: partition and put that post sysprep
Here is the answer file
< ?xml version="1.0" encoding="utf-8"?>
< unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
[code]...
I can't seem to fix this problem
View 3 Replies
Sep 6, 2015
Most of my pinned task bar icons that I have added are all simplified tiles with the first letter of the corresponding website.
ie: Gmail is " G", American Airlines is " A", Flyertalk is " F". Google is " G" (causing confusion with Gmail.), etc.
Is there any way to change these tiled icons to the website logo like in windows 8.1 or 7?
View 1 Replies
Sep 27, 2015
So apparently I don't have a dvd drive installed and I cant open any discs?
View 3 Replies
