Drivers/Hardware :: Canon LBP6000 / 6018 Is Not Recognized
Feb 23, 2016
When I plug in the cable for the Canon LBP6000/6018 printer in my new Lenovo 100 I get a message that it isn't recognized. I've used two different cables with the same result. My printer does not show up on the Devises screen. The printer worked perfectly on my old computer with Windows 7. I even converted my old computer to 10 and got the same error message, so the issue is with 10. How do I get my printer to work on 10? It's only a year old, so I won't replace it.
View 9 Replies
Similar Messages:
Jan 4, 2016
When the print spooler is turned on I get a message that says the printer queue is full. (The printer queue is empty.)
If I try the printer without the printer spool on i.e. print directly to the printer, I get a message that says "Unable to create a print job."
This printer was working with Win 10 until recently. The scan function works as it should. So the computer does see and interacts with the printer through the usb port.
Something must have changed in the latest Windows 10 release to gum up the works.
View 1 Replies
Feb 1, 2016
My canon printer isn't supported by Windows 10. Troubleshooting it just tells me there is no drivers. It prints fine, but i cannot use the scanner. Is there any way i can get the scanner to work, more specifically in gIMP?
View 4 Replies
Jan 6, 2016
Yesterday I inserted a CD to install driver for my new headset. The CD-R open, close normally and I also heard the CD spinning. But not thing happened in my laptop at all. I checked This PC: no CD drive (before upgraded to win 10, I had installed win 8.1 and the CD dive was drive F). In Device Manager, there's no CD/DVD ROM section, even i had checked Show hidden device in View tab.I tryed every methods found online, but not fixed. Here's the details:
1. Try ALL METHODS in this link: [FIX] Optical Drives (CD/DVD) Icon Not Showing in My Computer Window - AskVG
-> nothing
2. Try to uninstall Channel 0 and 1 under IDE ATA/ATAPI Controller. But as you can see in the picture above: there are no Channels under IDE...Controller. Tryed to uninstall Intel(R) 8 Series...Controller and rebooted, nothing happen
3. Try to update drivers using IOBit Drivers Booster PRO but all drivers are up-to-date.
View 9 Replies
Jan 27, 2015
I installed Windows 10 as an upgrade to Windows 8. My Dell laptop does not see the DVD drive. I had no success getting the drive to work in Windows 8 and (maybe of course) it doesnt see it now. This seems to be a common problem I have tried numerous fixes but have not had success. What is the latest and greatest solution?
View 9 Replies
Aug 14, 2015
It really isn't my day. I recently upgraded to Windows 10 from Windows 7 and previously my DVD/CD Drive was working perfectly. Now, nowhere on my PC, and I mean nowhere, is my DVD/CD drive recognised as existing. There is no DVD drive showing in Device Manager or in Settings>Devices.
I have taken the side panel off my PC and all cables are properly plugged in.
I have not tampered with the BIOS at all.
View 9 Replies
Oct 8, 2015
I started up my laptop a while ago to play some music while I do work but when I plugged in my headphones there was no music. The music plays on the speakers but headphones nothing.... I have tried many headphones on my laptop and none worked but they do work on my iPod. I am using Asus Zen Book pro UX501, windows 10 64 bit....
View 2 Replies
Nov 9, 2015
I plugged in my USB drive and I get notification USB device not recognized. In This PC it shows but it looks like this:When I right click to try and format it, nothing happens. I also tried renaming the drive letter, nothing. I tried many USB fix tools, such as, USB drive defender, Flobo, mUSB Fixer, USB Refresh, USBFix 2016, and most of them didn't even see the device in the list. It's SanDisk Cruzer 16GB.
View 3 Replies
Feb 3, 2016
I have recently upgraded to Windows 10 and alll is working well except for the CD/DVD drive does not automatically recognise a CD when its inserted. With previous Windows 7 when I put a music CD in drive wiith itunes open then itunes would ask if i wanted to import CD.
The CD/DVD is recognised in Device Manager and says that it is working properly. the only way I can get the CD to be recognised after inserting the CD is by going to the Device Manager and double clicking the CD/DVD line to open 'properties'. At that point itunes asks me if i want to import.
The drive is a Samsung SH-223L.
Autoplay is ON
View 2 Replies
Oct 6, 2015
I've recently upgraded to Windows 10 and I'm facing a problem: in the startup one of the HDD is not recognized.. I have to push the reset button and when Windows starts again then the HDD is recognized as normal and everyting goes OK.
But I'm getting tired of this routine.. everytime I need to use the computer I have to make the startup twice.
For more details.. I have Windows installed on a SSD HDD, then I have a SATA HDD and a third IDE HDD which is the one with the recognition problem.. I don't understand why the IDE HDD is not recognized in the first startup...
View 5 Replies
Sep 4, 2015
When I plug a USB3 flash drive into either USB3 port the message is Windows does not recognize it.
If I plug the same drive into another computer USB3 port everything is fine.
If I partially plug the drive in so that it only hits the USB2 contacts it works fine.
If I plug it into a USB2 port it works fine.
The drivers are installed. I uninstalled them and let it reinstall - same thing.
View 3 Replies
Feb 10, 2016
The DVD drive worked fine prior to installing Win 10 - now the computer doesn't recognize it. Win 10 apparently thinks it is a removable drive. The CD-DVD drive is recognized in BIOS.
How do I diagnose the problem?
View 9 Replies
Feb 1, 2016
My dvd player drive isn't listed and when you try and play a dvd the player spins but doesn't play anything since upgrading to windows 10. I have checked in device manager and it says device is working properly. I have also done the upgrade driver and it says I have the latest driver.
View 2 Replies
Aug 28, 2015
Just upgraded from Windows 7 to windows 10 --all working well except continually get message " USB DEVICE NOT RECOGNIZED ,the last USB device you connected to this computer malfunctioned and windows does not recognize it "I have gone into Device manager and see the yellow icon next to "unknown usb device (device descriptor request failed ) I have tried deleting it, disabling it , updating the drivers and still get this stupid error message. Which USB caused the problem . No usb presently connected. I will not update other 2 computers to 10 if I cannot get this resolved. Was not a problem with Windows 7
View 5 Replies
Jul 30, 2015
I have a SATA-1 TSSTcorp TS-H653 (not sure whether it is an F, G, H etc.) CD/DVD writable drive in an Inspirion 537s. I recently upgraded to Windows 10 Pro from Windows 7 Ultimate, but the drive is not recognized by the OS. However, the drive does show up in BIOS. I have searched and cannot find a driver for this drive.
View 9 Replies
Oct 4, 2015
I updated my laptop from Windows 7 to Windows 10, as an update not by formatting and reinstalling. I realized that the webcam is not recognized anymore, in the system info under problematic devices there is a:
Intel(R) 6 Series/C200 Series Chipset Family USB Enhanced Host Controller - 1C2D
PCIVEN_8086&DEV_1C2D&SUBSYS_11471043&REV_053&11583659&0&D0
This device is working properly. In the device manager I can see the device above listed with an exclamation mark.
The Laptop is an Asus N53SV.
View 3 Replies
Oct 2, 2015
When I start itunes a box comes up that says "An ipod has been detected but it could not be identified properly..." and then goes on to give instructions what to do. I have followed those instructions. I have also been to an Apple store and my ipod is up-to-date as is my itunes software.
The ipod will note be recognized. Further, all podcasts contained on the ipod that I have already listened to now have a symbol against them and cannot be replayed. I use my ipod all the time and am extremely annoyed that to date no solution that works has been provided.
Another problem with Windows 10 is with already purchased "Big Fish" games. The games appear so big that I cannot see the bottom of the screen to be able to play properly. I wish I had never upgraded to Windows 10.
View 1 Replies
Sep 9, 2015
I updated W7x64 to W10 Pro x64. The machine is WXP generation notebook. My problem is that the Intel PRO/Wireless 3945ABG is not recognized or Network and Sharing Center - Change Adapter Settings does not list this adapter. The Device Manager does show the adapter but with exclamation mark. What I have done so far are uninstalling/reinstalling the adapter and installing the drivers in compatibility mode.
View 6 Replies
Oct 15, 2015
I just 'upgraded' to Windows 10 yesterday from 7. Windows 7 has a generic photo upload program that activated when I hooked the camera up. Windows 10 does not recognize my camera in G drive.
Is there a generic program available to upload photos? Samsung support says they do not support Windows 10.
View 3 Replies
Sep 10, 2015
Previous Win 7 did recognise apple equipment so that I could download photos to the desktop but although I tunes syncs with my phone and pad, win 10 will not show them in explorer. How can I download pics without using the cloud?
View 1 Replies
Jul 31, 2015
I just upgraded to Windows 10 as I planned to use the weekend to sort out any issues I might encounter during the upgrade. Well boy did I ever. My Seagate 3TB drive decided it no longer wanted to be recognized by Windows anymore. It shows up as a failed/deactivated drive in Disk Management as seen here: [URL] It also shows up in Speccy as a physical drive. I currently have 2TB of data on there (including an OS image I did just before the upgrade as an extra prep step), so reformatting the volume is not an option until I get the data off.
View 9 Replies
Oct 10, 2015
I just bought a Sades SA 901 and am trying to install it. Software will not install because device is not properly recognized and does not request a driver install when plugged into any usb port.
View 3 Replies
Nov 15, 2015
Had some issues with my PC with user profile, so restored a 3 day old acronis true image backup.
now none of my external HDDs are recognized, by Windows or Aome hdd manager either.
USB pens are ok.
View 3 Replies
Aug 16, 2015
when trying to print get message to say off line even though it is connected to wifi router.
View 3 Replies
Aug 26, 2015
In my device manager my canon printer is listed under Disk drives, USB connection?? Its also listed correctly under printers too. Should I remove it from being listed under disk drives?? or leave it alone?
View 2 Replies
Jan 6, 2016
I have a Canon EOS 700D which until today I have had no problems connecting to my laptop via USB. However now I just get error 10 "This device cannot start". It connects fine using the same cable on two other laptops running windows 10. Since the last time I connected the camera which was about 10 days ago there have been two Windows updates KB3132372 and 3133431 installed.
View -1 Replies
