My canon printer isn't supported by Windows 10. Troubleshooting it just tells me there is no drivers. It prints fine, but i cannot use the scanner. Is there any way i can get the scanner to work, more specifically in gIMP?
View 4 RepliesAfter installing windows 10 over a 64 bit version of Windows 8.1, my HP 3800 scanner status says driver not installed. I was unable to find the requisite driver within windows or on the net, even on the HP site. Question is will a previous windows 8.1 driver work?
View -1 RepliesI have an Epsom RX560 (Printer/Scanner/Copier)
When Connected to Windows 10, it recognised the Printer straight away.
No need for the Install disk, it was up and running in just a couple of minutes and even without the install disk the results are picture perfect.
Is there somewhere in Windows 10 where it would recognise the Scanner instead of the Printer, or would I have to use the Install disk.
build 10049; i'm able to print but when i scan i get this error message ; i change location but i get the same error;
View 9 RepliesPanasonic MFS printer/scanner not working after installation of Windows 10 on my PC.
View 1 RepliesI've been experimenting with Windows 10 using a VM (VirtualBox) before upgrading. One challenge has been to see if I could get my old 1999 Epson Perfection 1200 scanner working in Windows 10 since Epson do not provide any 64 bit drivers.
I discovered you can use the Epson 64 bit drivers for the Perfection 2400 and they work fine with the Perfection 1200. The Epson Scan program is fully functional for normal reflective scans and film scanning (if you have the attachment). The built in Windows scan program also works. This fix also works in Windows 8.
Here is how to do it:
Download and install the Perfection 2400U drivers from Epson USA, version 3.04A [URL] ....
Connect and turn on your scanner
Run Device Manager
The Perfection 1200U will be shown under under Other Devices
Select Update Driver
Choose 'Browse my computer for driver software"Choose 'Let me pick from a list of device drivers on my computer'
UNCHECK the 'Show compatible hardware
'Click on 'Epson' in the Manufacturer box, and the scroll down through model until you find "Epson Perfection 2400', and choose that, and press Next
Ignore the 'Update Driver warning - choose 'Yes'; to continue to install.The Perfection 2400 will now be shown in Device Manager. Note that the Perfection 1200 will still be shown under Devices & Printers
Run Epson Scan and test the scanner. You may need to log out and log in again for program to work
When I plug in the cable for the Canon LBP6000/6018 printer in my new Lenovo 100 I get a message that it isn't recognized. I've used two different cables with the same result. My printer does not show up on the Devises screen. The printer worked perfectly on my old computer with Windows 7. I even converted my old computer to 10 and got the same error message, so the issue is with 10. How do I get my printer to work on 10? It's only a year old, so I won't replace it.
View 9 RepliesWhen the print spooler is turned on I get a message that says the printer queue is full. (The printer queue is empty.)
If I try the printer without the printer spool on i.e. print directly to the printer, I get a message that says "Unable to create a print job."
This printer was working with Win 10 until recently. The scan function works as it should. So the computer does see and interacts with the printer through the usb port.
Something must have changed in the latest Windows 10 release to gum up the works.
So I am currently on the Windows Insider Preview builds and have been having some issues with them and decided that they aren't for me. I was trying to do an upgrade installation to get back onto stock Windows 10 without losing anything but any time I get the installer running I am not allowed to select the option to keep all my stuff because "Windows may be installed in an unsupported directory." I have looked around and it talks about changing the default program files directory in the registry and to revert that back, but I never did that tweak in the first place.
View 1 RepliesI've had Win10 installed for ages and no problems until Upgrade 1511 came along. How come Windows 10 worked all that time and now refuses to upgrade?
Upgrade to Windows 10 Home, version 1511, 10586
error message:
"Windows 10 couldn't be installed
*Windows couldn't be installed because this PC has an unsupported disk layout for UEFI firmware."
I have an HP Officejet 6700 All-In-One printer which is connected online, no USB. The unit has been printing and scanning up I until I upgraded to Windows 10. The printer still works but I can not scan. I tried doing the command prompt "SFC /scannow" but the system could not find any problems.
View 6 Replieswhen trying to print get message to say off line even though it is connected to wifi router.
View 3 RepliesDoes W10 photo app have a facility to upload from scanner ?
View 9 RepliesIn my device manager my canon printer is listed under Disk drives, USB connection?? Its also listed correctly under printers too. Should I remove it from being listed under disk drives?? or leave it alone?
View 2 RepliesI have a Canon EOS 700D which until today I have had no problems connecting to my laptop via USB. However now I just get error 10 "This device cannot start". It connects fine using the same cable on two other laptops running windows 10. Since the last time I connected the camera which was about 10 days ago there have been two Windows updates KB3132372 and 3133431 installed.
View -1 RepliesUnable to open Canon Printer Quick Menu since installing Windows 10. The application file is installed on the laptop but Windows cannot see it.
View 2 RepliesIn setting it says driver is unavailable.
View 1 RepliesI upgraded my Lenovo U310 laptop from Windows 8.1 to Windows 10 a week ago. Everything seems to have upgraded successfully. The only problem that I can find is that none of the video streaming from Windows 10 apps can be played. I get an error 'Unsupported video type or invalid file path' when I click on a video article in USA Today or when I try to stream video from any other apps, NBC News, MSN Money, etc... from Windows 10 store.
I have no issue streaming videos from any of the browser though. What could be missing that could cause video streaming to fail?
Actually none of our old printers will print anymore...have tried with W10, W7 and WXP. Currently trying to get a Canon BJC-3000 to print off a W10(just upgraded from W7) - nothing. I'm told this may be due to the older printers are no longer supported on new OS's. Is that true or can I do something about it?
View 3 RepliesMy laptop is of Lenovo make, model No. G510s Touch. I am using Windows10 operating system. My web camera driver (micro soft veraion 2015.1064.10.0) got corrupted with virus and camera stopped working.
View 6 RepliesI have upgraded to windows 10 about a week ago but everytime I turn my pc on, it says HVECK is not supported by this OS. My audio driver is VIA High Definition Audio driver. It seems like they dont have an updated driver for windows 10. What do I do? Can I change to Realtek instead of VIA? I mean is that possible to use a different audio driver? Like, uninstall VIA completely and install Realtek?
View 4 RepliesDell WLAN bluetooth driver is not installing on my laptop . I found out that the same driver is working fine on my friend's laptop and i even used same driver for windows 8.1 previously.While I install it ,it shows an error that "The installer cannot run on this platform...",,I even tried refreshing my laptop but still it didnot work..
View 19 RepliesSince the move to Windows 10 (from 7) I haven't been able to connect to my Bluetooth speaker. This worked for me under Windows 7. There is no bluetooth entry in the device manager.
I have a Dell Studio 1555. Both the WiFi and the Ethernet connection to the Internet are OK.
The computer is a dual boot machine with Ubuntu. The bluetooth feature does work in Ubuntu.
Need a driver for my dvd player in an Asus K53T laptop. When I upgraded to 10 my DVD wasn't recognized. One suggestion was to uninstall from the Device Manager, reboot and then hopefully it would be reinstalled.
Didn't happen. Then I foolishly signed on to driver shyster, which was an expensive failure. So, I'm surprised drivers wouldn't be available from the manufacturers.
I upgraded to windows 10 a day or so after it was released and now when I go to plug in my laptop to tv via hdmi or when I plug in an old xbox360 wired controller it keeps telling me that it found the updates for the drivers but encountered an error while attempting to install them. It doesn't give me an error code for this. Also when I check the updated center is says it could not install updates and gives me an error: Error 0x8000ffff.
View 10 RepliesDo I need to reinstall my drivers after resetting my PC?
View 3 Replies