Drivers/Hardware :: Clone Only Used Space On 2TB HDD To 500 GB SSD
Sep 17, 2015
I've installed a new 500 GB Samsung SSD 850 EVO in my system. I want to clone only the "used" portion of my 2TB HDD (about 370 GB) to the SSD for faster performance when I boot, run programs, etc.
I'm a bit of a noob, and when I go into "Disk Management" one option is to shrink the largest volume on my HDD. I'm thinking that if I shrink it down to about 370 GB from the current 1.8 TB maybe then I can go ahead and clone using, say, Macrium Reflect. Once the cloning is done, I want to boot from the SSD, back it up, and then wipe the HDD and use it as a mass storage disk.
FYI, the HDD is encrypted by Bitlocker.
Is it as simple as that? What issues do I need to watch out for?
I'm going under Computer Management>Disk Management and have deleted a partition which gave me the unallocated 48gb, and I'm trying to add that unallocated space to the main drive (C), and it's not letting me, When I right the C drive there is only a shrink volume option, the extended volume is shaded gray.
I have windows 10, not 8. I'll attach a picture. Dropbox - issue.png
Until recently, I ran a dual boot system with Ubuntu - but for business reasons, I uninstalled it (along with it's bootloader). Anyway, I cleared up the hard drive space in the Disk Management app on windows 10, I have about 350GB free space from Ubuntu and I cannot extend the C: partition, you can see what I mean here
I can't seem to extend my partition and whatever program I use I have to buy the full version to extend my partition,
I had 2 useless partitions, one at the very beginning of my HD and the second at the very end. My setup is GPT Basic btw.
I would like to know, using MiniTool Partition Wizard version 9.1, if it is possible to merge these former partitions (now 'unallocated' space) into the Windows partition (C??
I right clicked on both of the unallocated space 'partitions' but any operations (namely, move) was greyed out.
I would like to clean up the disk layout (even if we are talking about only 1 GB. of space)
I installed Windows 10 on a new PC, with OS on Samsung 950 PRO. For data disk, at this stage, I use a Samsung 840 PRO which I transferred from my old 8.1 PC.
The data disk now shows in diskmanagment 351MB unallocated space, and 119 GB NTFS Healthy (Primary Partition).
How can I reclaim the 351MB unallocated to get maximum capacity of the data disk?
Maybe this a standard case of repartitioning, but I am not familiar with that and do not know how to do it.
I just assembled a new PC. It has a single 4TB hard drive. During Windows 10 installation, I created a 200gb partition to install to as the C: drive. It auto partitioned my drive into a 500MB system reserved partition, my C: drive, and two unallocated spaces of 1852.69GB and 1678.02GB respectively. The 1852GB space I can create a partition on, but the 1678GB space I cannot do anything with: Cannot create a partition, and cannot combine it with the rest of the unallocated space.
I would like to combine the two unallocated spaces to create a single partition from the remaining unallocated spaces, but cannot figure out how. I contacted Microsoft tech support via chat, allowed them to remote in to my machine, but they could not determine the issue either.
I have a 120 gig solid state hard drive, that I have my OS installed on (Windows 10)
I was going to install windows 7 on a second partition on that hard drive, so I shrank the current partition and it gave me unallocated space.
I had a few people tell me it wasn't possible to install windows 7 on the same hard drive as windows 10... for some reason or another.
So I decided to expand the partition back to its original size (the whole hard drive).
Before I shrunk the partition.. I had 60 gigs left, I shrunk it by 20 to install windows 7 on.
Well after some people told me it wouldn't work. I decide to re-expand the partition to take back up the whole drive.
Problem is, when I did that.. I loss that 20 gigs, it says that 20 gigs is 'used' space now. I tried scanning the hard drive for errors and defragging (won't let me defrag that drive.. I assume cause its either a solid state drive or the windows drive)
I would like to know if i could clone my ssd (m.2) with windows 10, all my files to my storage HDD.i just feel like having it on both my drives just in case something happens to either one.i have it backed up on a usb drive as well,but i just would like it on both.do i have to purchase a program like acronis? is there another way to do it? do you think i should really be worried about this? is it a good idea to have the same operating system on two drives in the same computer?
I am using Windows 10. And I just received November Update yesterday.
My new Samsung 250 GB SSD is on the way , and I don't want to install a fresh install. With my 1Mbps (128KBps) internet it will take more than a day to complete.
My HDD is 500 GB , but C drive is only 50 GB.
I want to close only the C drive into SSD and make it a 200GB+ partition (or less but more than 50 GB). I will be using HDD for media storage and SDD for OS and Apps.
I have an existing Windows 10 computer with corrupt W10 image that Microsoft says I need to totally reinstall. I also have a new SSD waiting to be installed. Due to corruption I do not want to clone. W10 USB has been created with Media creation tool. The questions - Do I need to format the SSD before W10 install? If so, how? Do I need to partition the SSD? If so how and with how many partitions of what size? I assume then I can unplug the HDD, plug in the SSD, boot from the USB, and it would install W10 onto the SSD.
laptop has Win 10 that was an free upgrade from Windows 7. If I clone to SSD will activation remain? I know if hardware changes will be an issue. I will backup key just in case, not sure it is needed. later hopefully a fresh install.
I have used Easeus and Acronis in the past with Windows 7, always with bootable media to do the clone. first time cloning windows 10, was thinking about Macrium, just never tried it. Put the new SSD in place and boot to the HDD as external?
I'm trying disgnosis for my Dad, who's trying to move over to SSD.
The story so far: Using AOMEI backupper bootable disk, we tried to clone his current HDD onto the SSD. Part-way through the clone process, it gives an error saying that the drive is too fragmented to clone, and stops.
We run defrag on the C: Drive, resulting in a 1% fragmented drive at the end, and try again.
The same message crops up - too fragmented. It turns out the 'recovery' partition (It's an OEM machine, so its ~10Gb rather than the normal 100Mb) is too fragmented to clone, and we can't defrag it.
So we just clone the C: drive, leaving 1Gb of unallocated space, and then use the recovery DVD's to run startup repair, hoping it will restore the MBR or 'normal' recovery partition, and make the system load. All we get is a blue screen with a blinking cursor in the top left that persists or over 5 minutes.
Startup Repair completes successfully. According to the Log file it ran 2 iterations of the repair operations, and found no errors! However the drive still will not boot.
This is particuarly annoying as I have used backupper both personally and professionally and have NEVER seen the fragmentation issue before, or had any issue at all for that matter with a cloned drive.
My previous laptop running windows 10 finally gave up the ghost and died on me. Not a hard drive issue but power problems (in trying to fix it I broke some of the solder joints), any way it was 5 years old and was due to be replaced, however the hard drive was absolutely fine. So I bought a new laptop with a shiny new 1tb hard drive with windows 10 pre-installed.
So having used Macrium before (when I installed a 256gb SSD) I decided to leave the new laptop as a clean install and reinstall any programs that I still needed. Guess what, it seems that there was an awful lot of stuff that I had accumulated that I just didn't need any more. After copying some documents over for work and installing a couple of essentials total space used including OS is less than 75gb.
I cloned my hard drive a Seagate 2T to a WD 2T using acronics software.I removed my Seagate drive and plugged in my WD drive in the same spot and system would not boot tried using windows 10 repair disk no luck plugged the Seagate drive back in booted???
Does Macrium or other common/good backup/clone package can take an existing good bootable SD Card and clone it to a fresh one? do they need to be exact matches [brand/speed/size] or near-proxy?
Received a MSI laptop with pre-installed W8.1. Planning to install a new SSD on m.2 slot. I have several options to update to W10.
p.s: I am keeping both SSD and HDD in my laptop
1) Clone from old HDD to new SSD using MSI burn recovery. Then update to W10 2) Upgrade to W10 on my old HDD. Get W10 activated. Perform a clean install on SSD. Lastly, format my old HDD as secondary drive
I've got a new computer and I want to clone my old OS(windows 10) from my old hardrive to my new hardrive. I've read that it doesn't always work! Is this true? And is there any other ways round it?
How do you clone a Hard drive with EaseUS? Or any other software! Do you just scan hard drive for files Etc. and export the results on to your external hard drive.
I had Windows 10 configured to auto log on with only a single user account and haven't had a single issue until last night after a restart to apply updates. Now when I boot my PC I am stopped at the login screen stating my password is invalid. The reason it's invalid is I now have two accounts with my name assigned however the one it tries to log into by default is the newly created one (it looks like it simply duplicated my original) and it doesn't allow any access to Windows. I select my original and log in manually just fine.
The problem is there is only one User listed in the User Accounts settings and that account only appears on initial boot as I can log out to the login screen post boot and the account has disappeared.
If I clone a disc with Acronis true home image . Does it just copy programmas and apps I have installed? This would save me a lot of time if this is true. For example if I have Windows 10 Home installed when I backed it up and installed pro, would it keep my windows 10 professional licence and Office Etc. On to my new install.
Just bought a new laptop for my wife, it's an HP Stream 11. It is suitable for her light needs, basically web browsing and some light document work, word processing etc. She's not even going to store music or photos on there. A few very light files only. So it comes with 8.1 and I think, awesome, I can install 10 straight away (I've not used 10 yet so was quite excited by this).
However when trying to install it's telling me I'm about 2 gig short of enough space for 10. I have about 9 gig free and it wants about 11. The hard drive is 20 gig. I've installed Windows 8.1, removed a shedload of apps she doesn't need, removed some programs that she doesn't need (for example McAfee) and I'm at the stage where there's literally nothing on there but an 8.1 that is as barebones as I think I can make it. Looking at the programs installed, even if I removed Office and some HP crap, it will only get me another 500 MB. Is Windows 10 on this PC simply not possible?
Does it need the space just for the install process itself? Or on an ongoing basis? Because I have a hard drive I can plug in, in the short term, but she's not going to want it attached forever as it will be a little unwieldy for a laptop!
Today is 12/5/2015 and i had a total of 100+ of gb on 12/3/205. On this laptop i play games but i usually delete games i dont play anymore i just want to know i there is a file on my laptop now adding files to it and taking up space
