Drivers/Hardware :: Continuous Errors Produced On SSHD
Sep 9, 2015
I bought a new hard-drive a Seagate SSHD. The one with a 8 gig cache and 2TB regular drive. Everytime or so I boot into Windows 10 it hard-drive errors.
MTF errors needing the hard-drive to be scanned to fix. Security Descriptor erros fixed through Scandisk. The odd thing is When I boot Windows 10 it causes other internal Hard-drives to be corrupted entries... index, MTF errors. Errors that only checkdisk can fix.
The other hard-drives have windows xp and windows 7 on it. They are NTFS.
However, my Ubuntu Harddrive is never effected. I run Windows 10 for a signifigant amount of time then it tells me to restart due to drive errors that need to be fixed. If I never go into windows 10 i never have problems.
Is Windows 10 being finicky with my SSHD, should I get a new drive? Not compatible with SSHD?
I had the drive on my computer for a significant amount of time before putting windows 10 on it. It was blank and never caused problems... not until I put windows 10 on it.
View 2 Replies
Similar Messages:
Aug 23, 2015
So I just updated my Toshiba laptop from Windows 8.1 to Windows 10 and now I'm having audio problems. At first after I upgraded I had no sound. I fixed it by uninstalling and reinstalling my Realtek audio driver. Now I got my sound back, but now whenever I play audio the sound isn't clear anymore Especially when I use YouTube. I updated my Realtek audio driver from version 6.0.1.7541 to 6.0.1.7586 and I still hear the buzzing! I tried audio troubleshooting and it said the problem couldn't be identified. What do I do?
View 3 Replies
Oct 16, 2015
I have a SteelSeries Sensei mouse and a Razer BlackWidow keyboard. Windows 10 daily attempts to install a "SteelSeries ApS - Keyboard - SteelSeries Sensei [RAW]" update. The update fails within seconds of starting with error 0x80240016. The initial failure message darkens my screen (even when another program is full-screened) and shows a simple message, I don't currently have the verbiage and can't reproduce until Windows attempts automatically.
The update says keyboard in the name, but also says my mouse model. I'm sure it probably pertains to my mouse, but my mouse is working fine and this update fails regardless.
I've rebooted. I've attempted to install while a different mouse was plugged in. I've tried updating mouse and keyboard drivers automatically through the Device Manager ("device driver is already up to date"). I've installed keyboard and mouse drivers from the vendor sites.
Is there anyway to get Windows 10 to forget about this update and stop trying to install it?
View 1 Replies
Aug 20, 2015
I've recently bought a new notebook which comes with an sshd - now I've read that the 8 GB just function as a cache for more frequently used programs. Is there anything I need to consider when setting up the OS on the drive to make sure the SSD part is properly used?
View 1 Replies
Aug 15, 2015
I have messages in some devices, manager in individual devices under events
display
Device PCIVEN_8086&DEV_0416&SUBSYS_06501558&REV_063&11583659&0&10 requires further installation.
HD-compliant consumer control device
Device HIDVID_046D&PID_C52B&REV_1203&MI_02&Qid_4004&WI_02&Class_0000001A&Col029&1488b11b&0&0001 requires further installation.
And Logitech
Device {A3535E08-EB26-49A9-8AE0-786ED1242812}VID_046D&PID_C52B&REV_1203&MI_02&Qid_4004&WI_02&Class_0000001A8&2b77d581&0&02 requires further installation.
And there are more under more devices. They all appear to be working OK and have had no errors.
View 7 Replies
Jul 30, 2015
I have a PC with Asus P9X79 Deluxe motherboard. It has Intel chipset and Intel BIOS RAID (RSTe) and 6 SATA ports connected to it. The chipset IDE controller lists in Linux as:
Intel Corporation C600/X79 series chipset SATA RAID Controller (rev 06),
and the PCI ID is:
0104: 8086:2826 (rev 06).
My RAID configuration is 2xOCZ-VERTEX4 256GB SSD's in RAID0, as boot drive (C: drive), and 2 (quite old) WDC WD2500KS 250GB disks in RAID0 for extra storage (games, movies etc) (J: drive).
So yesterday I decided to upgrade my Windows 7 Ultimate to Windows 10 Pro. All seemingly went well during the upgrade process, and the system booted fine, and most stuff seemed to work as it should. But after a while when I accessed files on the J: drive I started experiencing random (temporary) freezes.
Then after a while it got more serious and the whole system froze, I had to hit the reset button.
So I rebooted and looked in the event log, I get see tons of errors there saying that the disk has a bad sector.
Then I try using the J-drive again, by viewing some videos there, and it works fine, but after a while there are some freezes and then I see in the event log, that the drive was reset. After this it works again for a while but then another of those resets comes, and freezes everything for a short while (like 30 seconds).
But when I try to copy some large files off the J-drive, another reset comes, and then the event log starts showing a lot of the error messages from before, with "the disk has an bad sector". (I will post screenshots of these errors after I reboot back into Windows).
After this I can't access the J-drive at all, and Windows gives me error messages when I try to.
So, I figure that I might have just got unlucky and the old WDC drive actually developed read errors, although it's strange that it happens exactly when I install Windows 10 (these drives are something like 7 years old).
Well I can't copy the contents off the disk from Windows since it keeps failing as described above, so I boot into Ubuntu Linux from a USB stick, so I can use ntfsclone to image the J-drive to another disk. I start it running expecting that I'll start seeing read errors, but to my surprise there are NONE. It also copies all files off the J-drive without any problems from inside Linux!
So it was after all not the old drive that had failed, but instead Windows 10/Intel had failed me in a big way.
I trawled the web for updated Intel chipset drivers and installed those from the Asus site, but it made no difference at all. I couldn't find any other Intel drivers and when I searched for the RST drivers on Intel's own site, I could only find ones for Windows XP upto Windows 8.1, but none for Windows 10.
For now I'm left with a PC that I can't use, because I can't go back to Windows 7 and Windows 10 is not working with my RAID arrays. I got some spare 2TB disks, and I'm right now copying all the data from the old J-drive (the RAID1 about 500GB) over to this, hopefully I can then work in Win 10, but I am VERY concerned because the same RAID and drivers are used for my master boot drive with the two OCZ SSD's.
View 9 Replies
Jan 9, 2016
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 Replies
Jan 11, 2016
I upgrade to Windows 10 a good month or so ago. All seemed fine. I woke my desktop up today to find this green screen w/continuous circles. I have unplugged everything and powered down and restarted. (This is the only suggestion I could find to fix it) The green screen came back up immediately. I have tried to get to where I could restart in safe mode but I can't navigate anywhere. I only have this green screen.
View 2 Replies
Sep 22, 2015
I know it's in Windows, because it appears in all three browsers(Firefox,Chrome, and Edge) and in Word, Open Office, etc. It's an ad, but Ad Block Plus, Ad-Aware won't remove it. It just shows up as a band about 4-6" across the bottom of the screen. I can type over it, but it blocks most of what's in back. It basically says Series 5, Hyper Real Engine with a Samsung logo inside. How can I get rid of it? It comes on, stays on for about 15 seconds, disappears for around 15 seconds and the continuous loop never stops. I've tried everything, including anti-virus programs, turning my PC on and off, but no success.
View 2 Replies
Jan 12, 2016
Continuous beeping noise started after yesterdays win 10 update...
View 1 Replies
Aug 5, 2015
I recently upgraded to Windows 10, since upgrading I'm having pretty regular BSOD Crashes where the following error message appears;
VIDEO TDR FAILURE (nvlddmkm.sys)
It appears to happen at completely random times, could be watching a youtube video, opening a reddit page or just playing a song on itunes. I've updated to the most recent Nvidia drivers but to no avail. I also tried to follow the following instructions from this youtube video [URL] ...., however its still happening.
My computer is currently pretty much unusable! Specs are below :
Intel Core 2 Quad-Core Processor Q9550 (2.83Ghz, 1333MHz FSB, 12MB cache)
4096MB 800MHz Dual Channel DDR2 SDRAM [4x1024]
Hard Drive 1TB NCQ SATA (2x500GB) 7200Rpm Dual HDD Config Raid 0 Stripe
Single 1GB DDR3 nVidia GeForce GTX285 graphics card
PCI Card Ageia PhysX 128MB
Integrated HDA 7.1 Dolby Digital Audio
View 6 Replies
Nov 24, 2015
Blue screen and error 0xc000021a and the continuous repair loop
DESKTOP-9LUS32E-Mon_11_23_2015_225843_17.zip
systeminfo.txt
View 9 Replies
Nov 1, 2015
Earlier this afternoon I decided to reset Windows 10 as I had a problem with BSOD BAD_POOL_CALLING over and over again. I booted in Safe Mode, went to Advanced Options and so on. It wasn't a factory-new reset, just the one that removes all files, app data, etc. I left it for a while and came back to find it hadn't worked; there was an error message that read 'There was a problem whilst restarting your PC'. I tried again and the error message appeared again. Because of this, I decided to exit and continue to Windows 10 and see if it had done anything.
Now, when I try to boot my PC up, the circle that usually rotates on the 'Zoostorm' screen when loading doesn't appear. The PC then reboots and tries again, again and again, but with no success. I have tried turning off and on, and even unplugging everything, however nothing seems to work. My PC is now stuck in a continuous reboot loop and won't load. Unfortunately, I can't press F8 or Shift + F8 when booting to start Safe Mode. I have never made a recovery drive for Windows 10 and I don't think my computer came with a repair disk.
View 9 Replies
Aug 7, 2015
About a minute after starting up, my desktop begins to start flashing to black and coming back in a continuous loop. The file explorer, however is completely unaffected. Using Google I have found that this occurred back in the technical previews of Windows 10 as well, but a new update from Windows fixed the issue. I can not get the explorer stable long enough to even check Windows Update. I have also run sfc /scannow and it said the integrity of my system is fine.
View 4 Replies
Jan 28, 2016
Yesterday i had noramal updates and since then i cannot play utube videos just a black screen with continuous buffering no sound nothing.
View 1 Replies
Oct 15, 2015
Today, I finally went through with the free Windows 10 upgrade. After the upgrade concluded, my laptop worked fine for about an hour, after which time it crashed to the new and improved Windows 10 BSOD, informing me that they would restart my computer for me. The problem is that, after the initial ACER screen, in which I can press F2 to enter setup, a Windows Automatic Repair screen comes up, and shortly thereafter, crashes right back to the BSOD. It will do this 5 or 6 times before giving up and staying shut down. I cannot press F8 or Shift+F8 to enter safe mode at any point.
Now, when I press F2 to enter the set up screen, I am given the following 5 screens, in order:
As far as I can tell, with an admitted lack of expertise, there does not appear to be any way for me to access the BIOS to at least get to safe mode, and perhaps go back to a restore point.
View 1 Replies
Jun 19, 2015
I chose the "fast" ring update on the windows insider app in order to get the preview for windows 10 on my lumia 1520. It updated fine but since the migrating data process began, it has been stuck in a continuous reboot loop. The screen shows the nokia logo and the windows logo briefly, then shows the at&t logo (since I bought the phone in the US) with "not for resale" written in the bottom left corner. How can I fix this? I don't mind losing all my data.
View 3 Replies
Aug 23, 2015
I have an SP3 running Windows 10. Finding this continuous error in the event viewer?
DistributedCOM
Event ID 10010
The server {7006698D-2974-4091-A424-85DD0B909E23} did not register with DCOM within the required timeout.
I looked up the ID in the registry and came up with a REG_SZ, REG_DWORD, and REG_BINARY. One of the descriptions said "Out of proc server to enable Insider Hub and Feedback App scenarios to be reached from inside of its appcontainer".
View 1 Replies
Sep 8, 2015
If I run SFC it tells me I have corrupt files that it can not fix. When I tried to use DISM checking health says the files can be repaired yet if I run DISM with /online feature with out a source it says the same thing if I run it with a source which is it can not find the files needed. I have attached the CBS log and DISM log below in
View 4 Replies
Nov 14, 2015
After I installed TH2 on Thursday I decided to run a SFC check to see if I had errors and it came up with some that it said it couldn't correct. The assembly look at the attached file and tell me what I need to do.
Attached Files : CBS.zip 161.41KB
View 12 Replies
Nov 16, 2015
I downloaded and installed windows 10 home premium version on my desktop. The blue screen have been annoying me time by time when I'm using OS properly. There are several errors shows up every often, such as bad pool xxxx, page management, no area paged found. I tried reinstalled OS but the problems still exist. How to solve those errors. Someone said its caused by the drive software which I don't know how to pick it up from so many drive tools in my system. By the way, is there anyway to solve problems directly except downloading new OS version again?Currently running home premium 10240
View 1 Replies
Jan 19, 2016
I purchased a new NUC6i3SYK last week. I have installed a 250gb Samsung evo 850 M.2 HD and 1 8gb stick of Corsair PC4-17000 DDR4 Ram.
Windows 10 is a fresh purchase and install downloaded direct from MS.
The Nuc worked fine with both the HD and Ram being recognised and W10 installed fine. I loaded the drivers from the Nuc support page and then updated Windows. Everything still fine. Then I proceeded to install other programs and went to bed.
Next morning the PC had crashed and failed to restart. After searching the net for possible cause I decided to reinstall Windows 10. This time i didn't load any drivers and the PC was NOT able to connect to the Internet because I thought one of the updates may have cased the crash.
PC was still unstable and crashed often to the point it was in a BSOD loop. I then reinstalled Windows 10 again and this time I installed the LAN driver only and Windows 10 updated itself. It stayed on for 12 hours and has now gone into a BSOD loop again.
The BSOD error message changes but the main ones seem to be
Memory_Management
irql_not_less_or_equal
0xc000021a
Throughout this process I have:
Run Memtest86 for approx 20hrs with no errors
Performed a disk check
Installed samsung magician to confirm HD firmware is the current version
Updated the BIOS to current version
View 9 Replies
Feb 10, 2016
For the past few weeks I've been seeing errors in the Event Viewer relating to the LockScreen. These only happen when waking the PC up from Sleep mode. The errors are:-
5973 Activation of application Microsoft.LockApp_cw5n1h2txyewy!WindowsDefaultLockScreen failed with error: The app didn't start in the required time. See the Microsoft-Windows-TWinUI/Operational log for additional information.
and
1002 The program LockApp.exe version 0.0.0.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel.
Process ID: 133c
Start Time: 01d16111867ebe61
Termination Time: 4294967295
Application Path: C:WindowsSystemAppsMicrosoft.LockApp_cw5n1h2txyewyLockApp.exe
Report Id: e6af0181-cd07-11e5-9cad-6c626d3ed397
Faulting package full name: Microsoft.LockApp_10.0.10586.0_neutral__cw5n1h2txyewy
Faulting package-relative application ID: WindowsDefaultLockScreen
View 4 Replies
Nov 14, 2015
When starting my PC up it often yields a BSOD, which automatically restarts the PC and then enters windows fine. I have had no other BSOD apart from when booting up my PC.
The errors also differ greatly, such as:
PAGE_FAULT_IN_NONPAGED_AREA
IRQL_NOT_LESS_OR_EQUAL
KERNEL_SECURITY_FAILURE (FLTMGR.sys)
I'm pretty sure there are more variants, that I just havn't seen or can remember.
Here are the system DMP files and such: DESKTOP-CL9ID6S-14-11-2015__91352,43.zip
View 9 Replies
Dec 5, 2015
I have random freeze and BSOD with various errors.
dumps as requested by stickythread are attached.
The problem was caused by the motherboard (BIOS P1.90), it seems that does not support 8X4GB ram modules. I have removed 4 modules and the problem has disappeared. I do not think that the memory modules are defective because memtest found no error.
View 1 Replies
Jan 15, 2016
Was using computer like any other day and it became unresponsive. Music was still playing normally but nothing would respond. Couldn't even use CTRL+ALT+DEL. So I turned computer off. Restart wanted to do a 'Startup Repair', that seemed unresponsive as well. Can't get into Windows anymore. Can't seem to do a clean install either. When I start computer it stays at the all black screen with a blue windows logo forever; the one with the circle of dots going around.
Was booting from SSD but do also have HDD. I bought SSD new in November 2015. I've never had so much trouble trying to do a clean install before.
View 7 Replies