Drivers/Hardware :: Display Showing Split Screen
Nov 19, 2015
Since installing windows 10 on my old dell, i am having major problems. The Computer is very slow, and is probably too old to properly run the new Windows, but the biggest issue is that after a restart, i am seeing a split screen display with a line through the centre of the screen, and i can find no way to get it back to a single display. After multiple more restarts it has gone back to one screen, but i am now getting two again. In case i am not being clear, here is a photo of what i am seeing.
View 2 Replies
Similar Messages:
Mar 11, 2016
Before the Windows 10 update I was able to have two windows open on the same screen. I cannot find where to bring that back.
View 3 Replies
Aug 17, 2015
I just updated my display driver to the latest from Nvidia. Now the left half of the display is darker than the right half. I tried uninstalling the driver and reinstalling, but the problem remains.
The driver is Nvidia 355.60 WHQL , and yes my display card in on the list of supported cards. This is the driver for Windows 10 64 bit and my Nvidia GTS 450.
I have never seen this issue before and I don't know if it is Windows 10 or the Nvidia driver causing the problem.
View 1 Replies
Jul 31, 2015
I can download windows ten but when the pc restarts and boots back up it shows the installing screen for a split sec then restarts again and gives me this error.
View 1 Replies
Aug 26, 2015
At the far bottom left corner of the desktop resides the Windows 10 logo. It is suppose to open to a menu of 3rd party apps and Windows functions.
When I click the icon with a mouse, the menu screen opens for a split second and the immediately closes. This does not allow me enough time to open any 3rd party program on the menu or to employ any of the listed Windows 10 apps.
This also means that I do not have time to click on restart or power down and must do a hard shut down pressing the power button on the computer case.
View 1 Replies
Aug 4, 2015
Since upgrading to Windows 10 Pro 64-bit through an ISO file created by the Media Creation Tool, I noticed a font display problem. The screenshot shows the problem in Microsoft Edge (circled in red). The problem occurs in Internet Explorer and a few apps with browsers in them (like Steam) as well.
View 2 Replies
Sep 24, 2015
my cd drive icon was showing and working then stopped showing up. I did as much research as I could and purchased AVG driver updater and it worked for a few days and won't work again.
View 1 Replies
Sep 9, 2015
I have an HP Split X3 Tablet/Laptop (13-m110dx) that I just recently updated to Windows 10 Pro.
All is going very well with it except video playback from anything such as Plex or YouTube. What happens is: The video will start but will just keep looping the first second of the video while playing really choppy sound.
I have done the following: Installed the latest drivers from HPInstalled the drivers that were used on Windows 8.1Uninstalled all Windows UpdatesDid a clean install of Windows 10 Pro
I'm suspecting that it is the 'Intel Chipset Installation Utility' that is messing it up.
View 1 Replies
Aug 5, 2015
So I just finished installing windows 10 and I'm having this issue where my display driver isn't being recognized and instead its now showing "Microsoft Basic Display Adapter". Is there any way to bring back the old driver to its original resolution?
I have a Dell Inspiron N7110 and it seems like all the drivers are only compatible with Windows 8.1, how can I bypass that?
Also, another issue is that Windows Troubleshooter doesn't work. When I click on "Show more" it says that "Context: Restricted".
View 4 Replies
Mar 5, 2016
Today I have been using my PC as usual, I got info of Windows Updates (I'm using Windows 10) I opened up the updates and restarted my PC. As the PC was launching I got no display at all. Blank screen, nothing at all as if the PC was not detected. I tried restarting PC, removing graphics card / ram then replacing them but no use.
View 1 Replies
Aug 7, 2015
Just wanted to reduce c size, used aomi freeware to split c, after restart laptop just won't boot, how can i solve it, is there a chance to keep all data?!
View 1 Replies
Sep 7, 2015
I have 3 flash drives that, for some reason, no longer function regardless of which USB port they are attached to. They display as if they are ready but indicate "not responding" as soon as I try to access them. I see message "not migrating" under Events in their properties. This is a problem that has just arisen. I've been running Windows 10 since official release.
View 5 Replies
Aug 4, 2015
downloaded 10 on two pc and a laptop. with the laptop the screen size was adjustable, for the pc the screen is too far to the left unable to see start button. display over sized screen on pc only
View 2 Replies
Nov 8, 2015
When I click on the store it opens for a split second and then closes. I tried the wsreset.exe but i get this error ....
I also tried some other powershell commands that were suggested by others on some sites but i get the error that 'AppxManifest.xml' file was not found.
View 1 Replies
Jan 17, 2016
I currently have Windows 7 installed on a 128 GB SSD (C drive), which also houses my more "essential" programs and the Users folder.
I also have a 1 TB HD (E drive) which I installed the rest of my programs on (though, the registry still remains on C) and also contains most of my personal data. I moved the My Documents, My Music, etc. from C to E.
If I decide to upgrade to Windows 10, will the installer detect that I also have programs on my E drive? Or does it only look at the primary drive, my C drive?
View 1 Replies
Aug 5, 2015
While using PowerPlanner7, I believe I may have accidentally turned off display or brightness to 0. I am unsure if I successfully made it back to the desktop after rebooting(my attempt to solve the problem). I have tried searching the Internet for shortcuts that re-enable screen or turn brightness up(my keyboard brightness buttons do not work since I am on Mac and the functions keys are all remapped- holding fn then function is same as just pressing function now too)
View 5 Replies
Dec 14, 2015
Is there a way to prevent the screen from turning off when the computer is locked? She likes her lock screen images but the screen turns off after 30 seconds or so when locked. (I tried telling her to use desktop wallpaper, but she likes the lock screen better.)
View 1 Replies
Dec 30, 2015
I every now and then, but lately too often, get a pop up and my screen goes black..that the intel graphics display was not working but has been restored..then after 20 seconds or so the screen comes back on...BUT, it mentions for Windows 8..I have a new PC with windows 10.
View 1 Replies
Aug 19, 2015
Now have two 1" black bars on monitor. Am not a computer wizard - just switch and use ...
View 2 Replies
Feb 23, 2016
How only the top half of names in the toolbar shows up. Mozilla forum referred me to you thinking it may be operating system because it occurs on many of the websites I visit, not just Firefoxes toolbar. Please see attached examples.
View 3 Replies
Dec 31, 2015
Just purchased a used Samsung Chronos 7 laptop and updated the OS from 8 to 10. Now the SSD disk doesn't show up anywhere.
The C drive is 1TB and the SSD would be 8GB.
View 6 Replies
Nov 20, 2015
I actually have two issues (the second being that the built-in microphone isn't working, but that's the least of my worries). I have my laptop connected to an external monitor & I can't get any non-system sounds to play.
Dell Laptop w/ only HDMI video connected to Dell VGA monitor (no speakers) via an adapter that has a 3.5mm jack for speakers. I can get system sounds via the laptop's speakers, but I can't play MP3s and YouTube videos have no sound. I had things working at one point (no, I cannot remember what I did or can find the tutorial that I used), but after moving my desk (unhooking the laptop from the monitor), cussing at non-functional microphone, and setting things back up, I'm back to no sounds. When I did get the speakers to work, they were working on the 3.5mm headphone/microphone jack on the laptop, but not through the jack on the HDMI/VGA adapter.
I've seen things about disabling the HDMI audio controller. I cannot change the default audio devices via the sound dialog box that is available by right-clicking on the sound icon on the bottom right of the screen. I'm assuming that the Dell speakers that are stuck as default are the on-board ones on the laptop.
View 1 Replies
Nov 18, 2015
I am having a problem with the windows 10 upgrade service.
It keeps telling me my display adaptor is a Matrox adaptor but the actual adaptor is an intel motherboard adaptor.
No Matrox adaptor has ever been fitted (I have had the computer for 15 years (various new motherboards etc) and never have used a Matrox adaptor.
It wont let me upgrade as it says the adaptor is not supported.
View 6 Replies
Oct 26, 2015
I have just downloaded and installed Windows 10. All is good except the default resolution seems too large. I have tried all the options available in Control Panel/Display/Screen Resolution but none work or are in proportion except the basic default 1024 x 768 setting though this is way to 'big' for me.
My monitor, an HP w1907v, appears to want 1440 x 900 at 60 Hz but all resolutions options available in Win 10 are at 64 Hz - not sure if this is the problem? The installed graphics driver is the Microsoft Basic Display Adapter, a driver which the self-checking tool on the Nvidia website states is the correct driver for my old onboard graphics (Nvidia GeForce 6100 nForce 430).
I think I need to do something a little out of the ordinary. I cannot find a better driver but the resolution options are pants. Can I change the Hz from 64 to 60 and if so how, and will this offer the right resolution options for my monitor?
View 2 Replies
Feb 10, 2016
I have a Toshiba that I upgraded from Windows 7 Vista to Windows 10, but has no Bluetooth capabilities whatsoever, yet every time I shut down and turn my computer back on, whether it may be an update or just manual, I end up in the corner of settings with Bluetooth search on. I can't disable it because there is no disable button.
View 5 Replies
Mar 5, 2016
So the bottom of my monitor display is cut off. It is a Dell ST2010 monitor very old but still in working condition. It has nothing to do with screen resolution btw.
This is how it looks now, the problem started occurring like 3 months ago
This is how its suppose to look when i take a screen shot of it
View 4 Replies