I have bought Gold Touch HDDS-U3 docking station, I plugged both usb cables to the computer (one to SSUsb port and one to regular port), waiting for 30 minutes while it was turn off (for battery charging). After that I insert a 3.5' HDD and turn it on. Nothing happen. there is no red or green light and the device doesn't appear in Disks Management.
View 1 RepliesI am using a Sharkoon Quickport DUO Docking station, in which you can mount barebone hard drives.The problem is, that when I try to transfer files from an external hard drive to - for example - my internal hard drives, I get the following error after a few seconds, and the transfer stops:
View 1 RepliesI have lost sound. Programs were deleted.
View 4 RepliesI am having audio problems that I have been unable to resolve. My pc specs and problem below. So since I upgraded to Windows 10 one of the biggest things that annoys me is when I plug in headphones they are not picked up by my pc and I have to manually switch to them as default audio using the Playback devices menu. On Windows 7 I had a Audio Control panel that popped up and detected the headphones.
I am also having issues with the volume sounding low throughout and terrible call quality on skype not sure if this is a separate issue, I have tried manually updating, removing & reinstalling the audio drivers from the device manager and also tried downloading the realtek windows 10 drivers. None of these have seemed to work, I have tried software that detects out of date drivers to no avail and also made sure other components on my pc are updated incase this somehow worked.
PC Specs :
POWER SUPPLY - atx power supply stp 650watt
MOTHERBOARD - asus P8B75-M LX
Ram - 8GB
CPU - Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
GPU - NVIDIA GeForce GTX 660
Harddrive - 1TB Operating
[Code] ....
Issue i'm having with using my headset in my front panels and I can't figure out what's up.
If I plug the green headphone jack into the headphone port the pop up comes up and tells me this is the pink mic port. Gives me the option to select from headphone, mic, front speaker etc..
If i plug the pink mic jack into the microphone port it thinks this is the green headphone port and no option to select Mic.
Why are these reversed? The HD audio connector is connected correctly to my motherboard (only goes on one way anyway)
I am trying to write a script to detect all docking stations and monitors attached to those docking station for Lenovo Thinkpad t540p laptops on a domain network. Most of the monitors are Asus. Is this even possible? Running powershell from DEV WIN 10
View 2 RepliesEvery once in a while a local radiostation comes on without me asking for it.After a long search, i found that a process called "window.media. background player.exe" is doing this .When i stop that process, the music stops...But sometimes the next day and sometimes the next week or so, it's there again..
View 2 RepliesI recently installed Windows 10. But the drivers for my VIA soundchip which came with the motherboard don't work with it. I am able to install it but when I try to run HDVdeck it doesn't open. It did work in W8.1. Any fix?? Or can I disable front jack detection any other way??
View 1 RepliesBasically I installed onedrive for the first time on my computer, and I got a threat warning by my eset virus scanner. The message was something like c nedriveTemp followed by a long series of numbers. I tried to scan and delete the file but it keeps coming back. That threat message keeps notifying me like every 10 min.
View 1 RepliesThe hover-event response time is too fast , and it triggers unwanted events. How can i shut off the hover-event detection or drastically slow it down ?
View 4 RepliesThis is my main operating system:
I am trying to set the frequency detection of Windows update. So, I go to this menu in the Group Policy Editor:
As you can see though, that other setting must be enabled. So, I navigate to its menu and try to set it. I do not know what should I put in those boxes though...
- How can I set the Automatic Updates detection frequency to four hours?
Why can Microsoft understand I don't want to use these POS Realtek drivers. I use to disable driver updates from Windows 10 by going into Device Installation settings and Never install drivers from Windows update but now since the last stupid update everytime the POS Realtek drives install automatically no matter how many times I roll back and remove them. I hate the Realtek drives because the audio is super loud and sounds terrible. I just want to use the Microsoft HD Audio Driver which sounds great and uses little resources but no Windows 10 decides that the POS Realtek driver is better.
View 7 RepliesJust like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
Upgraded old laptop (HP Pavilion dv2225) to WinX and everything works except for sound. Device Manger (Win key+ X) shows no missing drivers for sound. Used to play AoK under Win 7.
View 2 RepliesI have been installing and reinstalling windows 10 through bootcamp 6 on El Captain on my Macbook Pro.
But i keep getting the same result - the speakers and right click option are missing.
Where i can download drivers for Windows 10 on bootcamp 6 or what other way to resolve this issue.
I'm using build 10240, and in the first install, it installed the Realtek audio drivers.
The problem with these drivers is that they completely mess up the sound in my headphones.
Anyways, I've tried : Uninstalling the audio manager in control panelDeleting the oem#.infUninstalling the drivers in Device Manager
None of these work. When I uninstall it, the driver is just reinstalled when my computer reboots.
so before I wiped my entire PC the sound was working flawlessly - I would use the audio inputs for the Razer Blackwidow Chroma and it would work perfectly.Since the reset however, no sound has been discoverable, I get a red x on my speaker, and it says "No audio drivers installed" on "Playback Devices" I have tried putting my headphones in every audio jack on my PC (front, back and keyboard) and it still isn't picking my headphones up, I have installed the latest drivers and still no joy.
View 1 RepliesI have a driver that loads late in the boot process. On every boot, the Win 10 boot process is interrupted about half way through by the "Found new Hardware" notification sound. It then continues to boot normally with no errors.Is there a log file that states the drivers that are loaded, and the time they loaded? If not, is there a 3rd party software that can give me that information like the old Dr Watson?
I figure the hardware driver making the "new hardware" sound is probably the last one to load, and I can find which one it is by observing the time it loads.I have unplugged every USB and other peripheral device with no luck. I have no flags in Device Manager, even the hidden devices have no errors.
Unfortunatley I am unable to install any driver for my phone; the Oneplus One. This is the error I'm getting:
"one of the installers for this device cannot perform the installation at this time"
I get the same error for ADB and Fastboot drivers.
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
View 2 RepliesIt used to be possible to do this in Device Manager IIRC, but with Windows 10 installed I can't see how to get a device driver report. Has this been taken away? If so what will produce such a report?
View 3 RepliesI just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I can't even search for new updates any more!
I'm having quite a bit of trouble removing the generic bluetooth drivers that Windows installs for you. Those have to be gone if I want to install Toshiba Bluetooth Stacks, which I need in order to use my Wii U Pro Controller in my computer. I've gone through a few methods to try this out and all have failed.
I started out by simply uninstalling the drivers on the device manager (or whatever it is called in English). Didn't work, as the drivers were back when I had to plug in my dongle to complete the installation for TBS. When I tried this in Windows 7, it worked flawlessly, yet in Windows 10 this method did not work.
Afterwards, I tried deactivating the forced driver signature, as well as make it so Windows Update doesn't automatically download any drivers it finds suitable. On top of this, I traveled into the INF folder of my Windows folder to do steps that Microsoft recommended: rename bth.inf to bth.inf.old and bth.pnf to bth.pnf.old. With all this, it should in theory work right? Nope, it didn't. Not even after a reset.
My last attempt involved unplugging my PC from the Internet as a first step, followed by everything else listed above and then a reset. The drivers were still back, bth.inf and bth.pnf somehow magically appearing in my Windows folder when I have no Internet access. I'm at a loss as to what I'm supposed to do.
Windows 10 should find new drivers through the update mechanism, which doesnt work always though. And if you go into device manager and click on a device and do a look for new drivers, it always finds new ones with a high chance. But it' just stupid to click all 100 devices single through. Isnt there a smart way to do this? Why isnt there an option for search and download all devices drivers.
View 7 RepliesI have just done a Clean Install of Windows 10 on my Sony Vaio VGN-NW21ZF laptop following a partition corruption while trying to repartition the HDD. previously it had been upgraded to Windows 10 from Windows 7 and there were no device driver issues.
All appears to be working OK, but in device manager I have two unknown devices that do not have drivers installed. On is described as Base System Device, and the other as Unknown Device. Looking at Sysyinfo I see the following details:
How do I work out what these devices are so I can try to find the correct drivers?
Looking in Computer Management I see this information