Drivers/Hardware :: Epson Stylus Pro 7600 - Driver Doesn't Work?
Aug 14, 2015
The Stylus Pro 7600 is now a really old printer, the last supported driver was for XP but it worked in Windows 7 and I believe to some extent in 8 although I never did try it.
It s a really good reliable large format printer though and very affordable in parts, ink and the second-hand purchase price.
However alas Windows 10 doesn't like it, I did the upgrade to 10 (and then the downgrade) from windows 7 but it will not see the driver it sees the device but calls it a USB high speed device or something like that and compatibility mode didn't seem to work.
So unless there is a clever work around and I'd love that to happen I'm stuck on Windows 7 for the duration.
View 3 Replies
Similar Messages:
Oct 14, 2015
i've updated to windows 10 on my pc and i'm unable to download the driver for my epson sx235w printer to my pc. i've tried the install disc and also via the drivers online. each time it starts to download the drivers it gets stuck on the download part with the spinning wheel for at least 30mins.
the printer was working perfectly on windows 8 via a usb cable, but since going to windows 10 the printer isnt recognised and the drivers wont install.
View 9 Replies
Feb 10, 2016
I've repeatedly attempted this, but always get "An error occurred during setup. Restart your computer, then run setup again". This is an all too typical message you can find associated with many Epson products.
I've tried:
-Clean boot
-Safe mode (install enabled)
-Using an Epson removal tool I finally obtained after my 5th chat with Epson.
-An Epson fix deleting temp folder and looking for setup.exe that never appeared.
-Manually removing all Epson folders and registry entries I can find.
-Disabling firewall and AV
The same CD installed ok on my 6 year-old laptop (both run Windows x64).
I've run SFC /Scannow - ok
At best, the scanner is recognised as being connected when plugged in, and appears with a yellow trangle under 'Other Devices' in Device Manager.
View 1 Replies
Jul 29, 2015
I'd like to know what I have to do in order for Windows 10 to stop reinstalling the latest(not working) video drivers. Every single time I go and install the working driver for it, after a reboot Windows has done it again and reinstalled the latest driver. How do I tell Windows 10 to let ME decide which driver to install and keep??
View 1 Replies
Dec 15, 2015
I have been attempting to run a USB Network Adapter on my new computer, but I get an error saying that it has no driver.
I've been trying to find a way to work around this error, but I have had no success.
Here is the Hardware Ids:
USBVID_0434&PID_7500&REV_0100
USBVID_0424&PID_7500
View 1 Replies
Aug 4, 2015
Why doesn't my printer work since I upgraded to Windows 10? I checked the drivers. all is ok.
View 1 Replies
Jul 29, 2015
My sound won't work after I installed windows 10. I'm using Conexant SmartAudio HD by the way. I tried using youtube for a solution but everything was for older builds.
View 4 Replies
Jan 13, 2016
I upgraded from Windows 7 to Windows 10 a few months ago. Yesterday the disc drive stopped working. I put in a disc I had made which contained various data, mostly text. When I clicked the D recovery drive nothing happened. In the past I would see a list of the videos on the disk and by clicking one of the items I could play it on Movies and TV. Now that doesn't work. I can play videos that I've downloaded and are in my videos file, but not videos from the disc drive. I have an HP Pavilion slimline desktop computer.
View 2 Replies
Dec 20, 2015
The camera on my Toshiba S50-B laptop worked fine when on the original Windows 8.1 but doesn't work now that I have upgraded to Windows 10. It says "Something went wrong - make sure your camera is connected and not being used by another application". I have tried everything I know of and find no reason. Is there another driver required or ...? I cannot even find the camera.
View 2 Replies
Feb 11, 2015
I've been attempting to use applications like Teamspeak or Google Hangouts, but whenever I try to use the built-in microphone on my laptop, it doesn't work. It did work when I was using Windows 8.1. The "update driver" button only says that it's up to date.
EDIT: I have also found that the microphone appears to be turning on and off, stopping any audio when it's on.
View 4 Replies
Jul 30, 2015
I updated to Windows 10 this morning, and after doing so realized that my side scrolling on my mouse pad (I'm on a laptop) doesn't work anymore. Googled, found out it was a driver issue, and went to download the correct driver.
However, acer aspire drivers don't have the touchpad driver updated for Windows 10 yet. Do I have to wait until the driver comes out to fix this issue? If so, how long that could take? (They have the important drivers updated already, those for bluetooth and wifi)
View 9 Replies
Aug 28, 2015
I have a multifunction HP C5280 printer connected via USB to my router that has a built in printer server and it's a couple of days I can't print through it from my laptop anymore (but I still can print from my smartphone as always).
The problem started when I removed the device from control panel to try installing the latest driver downloaded from the HP website, because I wasn't able to scan from it, but at least I still could print. Since then, even if the printer appears as ready, Windows doesn't even send documents to the spooler: the printer icon appears on the taskbar but it just says "0 document(s) pending".
Additional informations: I already uninstalled the downloaded new driver and installed back the previous working one and it's not a spooler problem since I can print if I directly connect the printer through the laptop USB.
View 3 Replies
Sep 30, 2015
I just upgraded to Windows 10 and have discovered a problem that I can't seem to fix. When I Right-click on my Touchpad, nothing happens. This was very useful when I need to fix a word spelling & get options for the misspelled word.
I have an HP Pavilion using Synaptics Touchpad.
View 9 Replies
Feb 10, 2016
would be great if the right click on my synaptic touchpad worked. Was fine until I moved from win7 to win 10.
View 1 Replies
Mar 10, 2015
I've noticed an interesting fact while i was working with few usb's . Windows 10 , at least mine cannot eject usb's no matter if you just plugged it in , safe eject doesn't work . There is a message coming up "this device is currently in use close all programs...."
View 9 Replies
Feb 2, 2016
ever since I had a new hard drive installed on my Toshiba Satellite I cannot make a connection to my printer. I was on Epson Tech support for almost 3 hours, and they told me the printer is fine, and I am connected to it, but there is something blocking the print job from going to the printer.
I forgot to mention that when they installed the hard drive, they upgraded my wind. 7 to Wind. 10.
View 3 Replies
Aug 24, 2015
I've been experimenting with Windows 10 using a VM (VirtualBox) before upgrading. One challenge has been to see if I could get my old 1999 Epson Perfection 1200 scanner working in Windows 10 since Epson do not provide any 64 bit drivers.
I discovered you can use the Epson 64 bit drivers for the Perfection 2400 and they work fine with the Perfection 1200. The Epson Scan program is fully functional for normal reflective scans and film scanning (if you have the attachment). The built in Windows scan program also works. This fix also works in Windows 8.
Here is how to do it:
Download and install the Perfection 2400U drivers from Epson USA, version 3.04A [URL] ....
Connect and turn on your scanner
Run Device Manager
The Perfection 1200U will be shown under under Other Devices
Select Update Driver
Choose 'Browse my computer for driver software"Choose 'Let me pick from a list of device drivers on my computer'
UNCHECK the 'Show compatible hardware
'Click on 'Epson' in the Manufacturer box, and the scroll down through model until you find "Epson Perfection 2400', and choose that, and press Next
Ignore the 'Update Driver warning - choose 'Yes'; to continue to install.The Perfection 2400 will now be shown in Device Manager. Note that the Perfection 1200 will still be shown under Devices & Printers
Run Epson Scan and test the scanner. You may need to log out and log in again for program to work
View 7 Replies
Jan 21, 2016
Since changing to W10 I am unable to install the above on my lap top, both worked fine on my old vista machine, little notice comes saying something like ..incompatable with the O.S, is there away to get around this ?
The printer, an Epson DX4400 is a few years old I know, but it is still very good and I dont really want to get rid of it.
View 9 Replies
Aug 25, 2015
Updated to Windows 10 from Windows 8.1 two weeks ago.
Had problems with Firefox. Tried to download to replace existing Firefox. CNET site appeared to be correct but something seemed wrong so I killed the download. But.
- The windows start menu doesn't come up when I click on the icon, but if I right-click, a text menu does appear and lets me, for example, shut down.
.- If I click on the Windows End icon in the task bar, the screen flashes but End does not come up. Ditto for the Windows Store icon.
- Somewhere SpyBot S&D was erased, but I was able to download it.
- If I double-click on a photo in Windows Explorer, I get a popup that lists the name of the jpeg and says Invalid Entry to Registry. If I right click on the photo and go to any of the options the photo is opened except if I choose Photo.
- Firefox cannot properly display the Yahoo mail page, though Pale Moon and Opera can.
- I have Avast Anti-Virus and MalwareBytes Anti-Malware and when I run their scans, they find no issues.
View 5 Replies
Aug 29, 2015
I've just upgraded to Windows 10 on my Asus Vivotab Note 8 tablet, and so far it's been great except for one serious issue: whenever I use the stylus in Drawboard PDF, I get this BSOD error within 1 minute:
PAGE_FAULT_IN_NONPAGED_AREA (win32kbase.sys)
I didn't get it while I was on Windows 8.
View 1 Replies
Oct 22, 2015
I recently upgraded to Windows 10 and found out that I am not able to print out all. When I was using Windows 8.1, I was able to print with ease. But now, it is unable to print.
I use a Lexmark 7600 Series printer.
View 1 Replies
Dec 21, 2015
Just did a clean install on 10 and was researching another problem that required the run box but mine doesn't seem to work.
I get a response that 'it didn't open in a timely manner'.
View 4 Replies
Aug 7, 2015
Sky Go App doesn't work in W10, I have tried different Silverlight settings to no avail!
View 9 Replies
Mar 26, 2016
Having problems with Internet connectivity in windows 10 while having eset nod32 9 installed?I did the latest update to windows 10, and now my Internet doesn't work. I get an error while trying to repair of "windows sockets registry entries required for Internet connectivity are missing". I un-install eset, Internet comes back immediately.
This is a common problem, but people don't seem to be connecting it with their virus scanner. Installing free avast makes the computer go directly into repair mode and won't even boot. Windows 10 seems to not like virus scanners. It is a fresh build, OEM windows 10 home, tried to reinstall the system twice with the same results.
View 1 Replies
Dec 28, 2015
I have a notebook from HP dv603290br with Radeon HD 6550D but could not get the video driver to work properly.
View 1 Replies
Jan 5, 2016
Windows 10 went wrong Again! First I lost all my favorites, then my Computer experienced exceptions (what ever they are?) followed by random Crashes.
So I did a clean install using my ISO disc and tried to Install Page Plus X4 which was working fine before but it won't work now, even though I installed the latest patch.
I get told its an incompatible Programme, even though it worked OK before I did a clean install, with a note that says that Microsoft are looking for a Solution (you could have fooled me!) also I did the bit about using the Settings that worked on a Previous Programme but that didn't fix it either.
Also uninstalled and re installed the Programme but that didn't work either as did installing net framework.
Also when I get new emails, I am no longer getting advised of any new emails, so I have to keep checking my email box myself.
I looks like I may have to do yet another Clean Install.
I've tried turning off the Automatic Updates but that doesn't seem to work (maybe I'm doing it wrong, so how do I do that).
View 5 Replies