Drivers/Hardware :: Ethernet Driver Not Working After Installation
Feb 23, 2016
So I tried to update from Windows 8 to 10 last week. That didn't work for me, so I had to format everything and install Windows 10 afterwards. At first neither W-LAN nor LAN would work. Then I un- & reinstalled the W-LAN driver so now everything's fine except for my ethernet connection.
- Adapter is enabled
- I have un- & reinstalled the driver multiple times (even tried compatability mode, since some sites state that the latest version for AR8161 only supports win 8)
- I was about a thousand times in the properties menu of the ethernet adapter
The full name of the adapter is "Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)"
I just ran diagnostics on the ethernet adapter and after trying to fix some network protocols Windows prompted me with this. So I tried to fix this by entering
In cmd which sadly didn't do the trick. Neither did entering
Code:
netsh int ip reset c:
esetlog.txt
in cmd (admin ofc) after editing the permissions for the "26" folder in HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/Nsi/{eb004a00-9b1a-11d4-9123-0050047759bc}
So the group "everyone" has "full control".
I am still stuck here w/ the "One or more network protocols are missing on this computer" -problem.
I recently upgraded directly from Windows 8.1 64-bit to Windows 10 and I am having some problem with my Ethernet Adapter. My Ethernet Adapter is a Killer e2200 Gigabit Ethernet Controller, which is built in to my motherboard (MSI Z87M GAMING). When I first installed Windows 10, I found both a software suite and just the drivers themselves on the Killer website. I first tried the whole suite, but it didn't really work very well, felt unnecessary, and basically didn't seem to actually install any drivers. I then used the actual .inf file for my Ethernet Adapter to install manually. I uninstalled the driver and software, and then installed the driver manually through Device Manager by saying "have disk" and navigating to the folder and selecting the .inf file I downloaded. This works, but I have to repeat the process of uninstalling and reinstalling the driver every time I restart Windows.
There are additional variables that could also contribute to the problem. I am using one of those adapters that plug into the electrical outlet to extend the Ethernet line to reach my basement. I don't know if this really should have any effect on my problems, but I figured I should mention it. The product is made by TP-LINK. I also have VPN software on my computer, and part of running the VPN software is having it install a "TAP-Win32 Adapter V9" driver under Network adapters in Device Manager. This could be contributing to my problems, but I do need to have access to my VPN. I did not experience this problem at all under Windows 8.1 using the driver install disc that came with my motherboard.
I upgraded to Windows 10 on my gaming PC and suffered from network drivers not working along with my graphics driver. But now Windows 10 says it's not activated. "I had a legal version of Windows 7 on this computer and now Windows 10 isn't activated.
For the past few months, the right touchpad button does not work with the Windows 10 drivers. Windows 8.1 drivers worked fine. If I switch mouse settings to left handed, then the buttons work fine, but obviously this is awkward to get used to. I have rollbacked the driver to a very old edition and it worked fine, however then I had no synaptics touchpad settings so the touchpad settings could not be altered.
I installed Windows 10 for the first time a few hours ago. I like the new interface, etc, but I have a few problems:
Xbox One wired controller doesn't work. Windows 10 automatically install a driver for it, but it still doesn't work. I tried some solutions like this, but without success. I haven't that Microsoft Xbox One Controller entry he wrote about.
Xbox controller works fine with another PC. And these USB ports as well, works fine with other devices.
why my print spooler keeps shutting off since i loaded W10. I have a HP ENVY and have tried to run both printers that worked prior to the install. Both work on the other laptop that isnt running W10.
Need to install a printer driver from a cd but have a message : action blocked and have to contact admin. i m the admin and. the pilote is not on Samsung web site. how can unblock the config of win. 10 to be able to insall the driver.
This is not exactly win 10 specific question, i had same problem in win 7, but now that i'm on win 10, that problem is still there. Here's what's going on:
I have high-end gaming PC with GTX 980 and 4k monitor and 1080p monitor as secondary.
4k Monitor is connected via DisplayPort and other monitor is using HDMI
Both of those monitors have built-in speakers (actually i don't think 1080p monitor has speakers)
But here's the problem, windows 10 keeps automatically installing HDMI audio drivers and 50% of the time when i boot my system, all my software defaults to the stupid HDMI sound.
This is extremely annoying and i'm about to pull my hair out over this. All my media players default to monitor audio, even tho windows does not select it as "default device".
Also even tho other monitor doesn't have speakers, system still thinks that the monitor has speakers and sets it as audio device.
Also when i record gameplays using shadowplay or other recorder, lot of times there's no audio on videos, because screen recorders also default to that dumb hdmi audio. I can't be bothered to check audio every time i do something.
I really need a way to tell windows 10 to STOP doing that. Here's what i've done so far:
1. under playback devices, i have DISABLED both of the monitors as playback devices. 2. I have tried uninstalling + disabling drivers for both monitors in "device manager" 3. i used local group policy to force windows not to install drivers (gpedit.msc > administrative templates > system > device installation), then i grabbed the group ID from device manager and entered it there to prevent windows from installing drivers for any audio groups.
After step 3, drivers were not installed, but windows still shows both monitors in "playback devices", only difference is that in device manager it says that this device does not have drivers installed, but they're still showing up in "playback devices", therefore all my software is STILL able to use them as playback and some of my software, like winamp, still defaults to them.
Forgot to mention, that if I disable both of them in playback devices, windows automatically re-enables them at some point. probably at boot, but i can't be bothered to check every few seconds, i just want windows to STOP trying to tell me what's best, i like my Asus STRIX 7.1 headset + 7.1 Hi-Fi home theater speaker system, i don't need some tiny jurassic stereo speakers lol.
I want to punch whoever made this feature. I mean .. what kind of an caveman would buy high-end gaming PC with GTX 980 + 4k monitor and NOT have a proper sound card + headset? Did those low-brainers in microsoft seriously think that anyone using high-end gaming PC, would like to use HDMI as primary audio? that's just ridiculous!
I think my only option is to force windows to think that i'm not using HDMI so it won't even detect my monitors as audio devices, is that possible.
I've repeatedly attempted this, but always get "An error occurred during setup. Restart your computer, then run setup again". This is an all too typical message you can find associated with many Epson products.
I've tried:
-Clean boot -Safe mode (install enabled) -Using an Epson removal tool I finally obtained after my 5th chat with Epson. -An Epson fix deleting temp folder and looking for setup.exe that never appeared. -Manually removing all Epson folders and registry entries I can find. -Disabling firewall and AV
The same CD installed ok on my 6 year-old laptop (both run Windows x64).
I've run SFC /Scannow - ok
At best, the scanner is recognised as being connected when plugged in, and appears with a yellow trangle under 'Other Devices' in Device Manager.
I have two computers working on Windows 7 that are directly connected to each other via an Ethernet cable utilising Windows Sharing and all works fine.
However, I have two other computers on Windows 10 that are also directly connected to each other vian an Ethernet cable and I cannot get them to see each other.
All the settings are the same as the Windows 7 devices but there may be something different in Windows 10 that makes what was a very simple process now more difficult.
How to successfully get two windows 10 devices connected and found if there is some subtle setting that I am missing.
I am completely wiping my hardrive with DBAN and doing a clean install of windows 10 with a dvd I created with the media creation tool. Will the fresh installation of windows come with a driver for ethernet cable so I can get on the internet.
I know I can get the drivers and put them on a usb to use after install, but I'm having trouble with malware on other computer and I don't want to transfer anything.It is windows 10 home on a 64 bit Toshiba Satellite C55-C5241 if that matters.
The other day I was connected to the internet via Ethernet cable I bought around 3 weeks ago and it was working well with no problems, but for the past two days when I plug in my ethernet cable, my laptop doesn't detect it and it says "Network cable unplugged".
I am having trouble getting my internet connection to work with an ethernet cord. I have no problem using wifi, but I get disconnected on wifi pretty frequently. I have two ethernet cords in my possession, one of them is new, and neither works. I've tried connecting to the router and the modem.
I've used used troubleshooter with both wires while plugged into the router and the modem. I've created a connection that has our given username and our password in it.
I turn off the wifi specifically by clicking on the wifi icon on the bottom right of my computer screen. It seems that the ethernet cord is not detected.
I recently upgraded my laptop to Windows 10 from Windows 8.1. After that, my Realtek PCIe GBE Family Controller (ethernet) randomly stops working. After a reboot or "fixing" the problem, the card works for anywhere from 1 minute to 4 hours, then fails again.
Sometimes "failing" means that in control panel it shows that it is still connected, but doesn't actually work, [URL]
or other times it just shows that it is unplugged, when that is certainly not the case [URL]
Troubleshooting the problem with Windows troubleshooter yields three errors, seemingly random when they each appear.
The three errors are "The Default Gateway is not Available", this error [URL], and then finally a DNS error that shows up on Chrome and the Windows troubleshooter [URL]. The way the internet stops working is Chrome will stop loading web pages and give me a DNS error, shown in the most recent gyazo.
So far I have tried rebooting numerous times, (which USUALLY fixes it for a few minutes), troubleshooting with Windows troubleshooter, and changing the DNS servers to Google's (which I have now changed back to the automatic setting since my ISP, Time Warner Cable, isn't too happy about working on an external DNS server. I have also tried eight different ethernet cables, over two different networks and routers. All of this has begun after I upgraded to Windows 10.
I have tried three different drivers for the ethernet card; one from Realtek's website, one from my laptop manufacturer's website (Sager), and lastly Window's generic one, none of which have worked for me. It could be a coincidence, but it seems that if I have constant load on my ethernet card, it lasts for much longer without failing.
After I installed Windows 10 on my computer I cannot connect to internet through the ethernet port. I've tried everything. I get the message that "Ethernet Doesn't Have A Valid IP-configuration". I tried to reinstall the network driver, ipconfig /release and ipconfig /renew as admin but it cannot find the "Default Gateway" and when I type ipconfig /renew it cannot connect to the DHCP server.
While trying to plug in a VGA cable, I accidentally turned off my power strip, which cut the power to my computer. When I turned it and my computer back on, I was unable to connect to the internet via Ethernet cable.
I went to device manager and under network adapter, it said "This device cannot start, code 10." I've tried reinstalling it, both automatically and manually from a CD and USB. I've done almost everything I can think of to fix this. I scanned and fix any errors on my hard disk, I've reinstalled all my USB drivers, I've power-cycled my router, I've tried different Ethernet cords, and I've tried to delete any corrupted files in my registry, but that must either not be a thing on Windows 10, or I am doing something wrong.
OS: Windows 10 Processor: Intel i7 Motherboard: Asus
Very frustrated!! I had internet connectivity prior to windows 10 upgrade. The above message is what I am receiving. Network Center states: Unidentified network. I have done the following: Taken modem/surfboard, router and pc down gracefully then brought back onlineUsed windows troubleshooterread thru (and walked thru) dozens of forums with solutions to other "similar" issues**I have tried to connect directly from pc to modem. I get the same results. I have zero connectivity from my pc so I plan on using a thumbdrive if I need to reload drivers. I'm about to revert back to 8.1 and call it quits..
After installing windows 10 on my HP laptop PC, some keyboard keys have stopped working. The keys that don't work are: { 'escape' 'g' 'h' 'backspace' }. I am sure it is not a hardware problem because on occasion, all the keys that previously did not work, start working again. In fact, as I am typing this thread, my keys are working correctly. When they stop working, I try to uninstall or update the driver in device manager but that does not work. Keep in mind this started happening after installing Windows 10. I have not had this problem in Windows 8.1.
Messed around with the drivers, now the ethernet device doesn't show up in the network adapter settings, although it shows up in the Device Manager. It is also apparently in sleep mode.So after formatting and installing Windows 10 x64 on my Dell Inspiron 3542, I decided to update/re-install the drivers from the official Dell download page. Windows Update had taken care of the hardware but the versions were outdated, so I set to work. After successfully installing almost all the drivers, I ran the Ethernet Controller Driver and after installing it, the ethernet device was disabled. BTW, the device shows up as "Realtek PCIe FE Family Controller".
I enabled it but it still remained disabled. In the Properties dialog box it gave me the option to disable it, which means that it thinks that the device is enabled, which it is not. It is visible in the Device Manager, so it is being recognized. After restarting to come to the same result, I deleted the driver from Device Manager and re-installed it, which didn't work. (I don't remember if I attempted a roll-back, although if I did then it obviously didn't work either.)
Then I went to the Realtek official website and downloaded the Win10 Auto-installation Program. It asked me to remove the previous installation from Dell, and near the end, it gave me the error, "The Realtek Network Controller was not found. If Deep Sleep Mode is enabled, Please Plug the Cable". And after this, or after deleting and re-installing the Dell driver (I unfortunately don't remember when), the ethernet device disappeared from the adapter settings. Now there's only Wi-fi there.I really want my ethernet back, even though I have wi-fi to connect to the internet. The only solutions I can see are to either get the Dell driver working or to remove the device from sleep mode.
i have a killer e2400 network adaptor over a wired connection on my msi motherboard. Unfortunately, out of the blue it has stopped working. I constantly get the error message "Ethernet doesn't have a valid IP configuration." I have tried a number of things such as stopping and restarting the services in computer management. Nothing appears to work. I know my router works as I'm using it now on another computer.
So i had this virus that was keep sending and redirecting to websites like - get money from this etc. So I wanted to uninstall but i uninstalled something VCI controller driver and now my keyboard, mouse are not working, I am on windows 7. I tried to put disk and try repair but it gave me an error...
