I just installed Windows 10 fresh and noticed that two of my Harddisks are not showing at the left menu in the Explorer.I have 3 Harddisks and only Harddisk D: ist showing. When i connect a USB-HDD it shows up instantly.
View 9 Replies
Okay, I have Windows 10, and Macbook. My PC, have 2 hard disks, one is of 500 GB ( Seagate ) and one is 3 TB Western Digital (Black).
Machine is loaded with:
CPU: Intel Core i7-4790K 4.0GHz Quad-Core Processor
CPU Cooler: Corsair H100i 77.0 CFM Liquid CPU Cooler
Motherboard: Asus MAXIMUS VII HERO ATX LGA1150 Motherboard
Memory: Corsair Vengeance Pro 8GB (2 x 4GB) DDR3-1866 Memory
Storage: Seagate Barracuda 500GB 3.5" 7200RPM Internal Hard Drive
Storage: Western Digital Caviar Black 3 TB 3.5" 7200RPM Internal Hard Drive
Video Card: Asus GeForce GTX 770 2GB DirectCU II Video Card
I am planning to Install Mac OS X on 500 GB one and keep Windows 10 on 3 TB one. So is it okay if I will just remove the 3 TB Hard disk, and install Mac OS X on it ? 500 GB hard disk have files of Windows 8.1 already. But it is not my primary hard disk.
I have an external hard drive that I have used regularly with a Windows 7 machine via esata
that does not show up when plugged into my Windows 10 notebook via USB.
I can see it under the disk management, but there is no drive letter assigned so I cannot access it.
When I insert any removable drive (USB, SD cards, etc) the device shows up twice in Explorer. Once under "This PC" tree and the other as a device. See attached pic (USB Drive H):
I remember hearing about this being the way it's designed to work, but frankly it's a bit silly - I only need to see a single entry for the drive/device...
Is there any way to get rid of one of these entries without stuffing up some other Explorer feature?
My setup before the problem was:
- Windows 8.1 in a 250GB SSD with Linux dual boot
- Secondary 160GB HDD (fs: ntfs, type: primary)
- Secondary 3TB HDD (fs: ntfs, type: gpt)
The 3TB drive was working normally on windows 8.1 when I bought it. After some months I decided to upgrade to Windows 10. After that, I cannot access my drive and Disk Management shows just grey options for the drive.
[URL]
After that I did a clean Windows 8.1 install again just to see if it was an OS problem, but now the same is going on with the management system. I used MiniTool Partition Wizard to check what's going on and this is what it shows
[URL]
What I tried doing is to force a label on this drive with MiniTool (in this case, D:, but then when I try to access the folders in Explorer it says 'D: is not accessible, access denied'. I already tried giving me all permissions/full control in the security tab in various ways but none worked, it still said 'Access Denied'.
[URL]
The only way I could finally access it is by killing explorer.exe and then starting it again with Admin rights, but once I reboot the system, the drive dissappears again and I have to do everything all over (assign label with MiniTool -> kill explorer -> open explorer with admin rights).
[URL]
P.S: Before you ask, I am not trying to recover deleted data. The partition exists, and I can access it through MiniTool Partition Wizard (since it recognizes it as a active EFI Healthy Partition on a GPT formatted drive). The problem is trying to access through Windows Explorer to the data.
[URL]
I'm having trouble with USB devices not showing up in windows explorer. I put in a thumb drive with data on it, but it's not in win explorer. I went to device manager and found the TD under disk drives. Also my external 3T G: disk drive is there. The thing is that my G: drive shows up twice in win explorer, once as a disk drive and the other as an expansion drive. I still can't see the TD. So how can I look at the drive or do anything with it. The light on it is on and the computer see's it, but no way to access it. I have the latest windows updates. I have all usb and hid unchecked for the computer to put them to sleep if not used, but that doesn't work.
View 9 RepliesI just put the 1511 upgrade on (for the third time, but that's another story). I've noticed that when I open File Explorer I have a WHOLE BUNCH of USB ports that have nothing plugged into them... What the upgrade did, but these weren't visible previously. How do I turn them off?
And yes, I've gone into the File explorer options in the control panel and UNCHECKED "Hide empty drives". Didn't appear to make any difference...
New win 10 and new dirve .drive shows in 'this computer'. Cant recognize any disks. here is the event log:
View 4 RepliesSince upgrading my SATA DVD/CD RW will not work. I insert a disk the light come on showing it is reading and than the drive opens and the pop up box appears stating "Insert Disk" . So I cannot install any of my software. I have read that a lot of people are having the same problem.
I went into Device Manager and it show this device is working, the drivers show 2006. The Drive is TSST corp CDDCDW SH-203N. I am Dual booting and at least get some work done on the tried and true Win 7 Ult.
I am currently unable to access my Local Disks, or open programs inside them, such as the task manager, user account control, and even the registry editor. Attempting to open anything (With administrator priveleges) just result in an access denied message. I have tried multiple solutions off the first searches on google, though none of them have worked, due to the things required in those solutions not being able to be accessed.
I have even tried to reset my PC and reinstall Windows, though when I click the "Get Started" button, nothing happens.
Is there any hope left for me, or do I need to get new drivers and abandon my valuable data?
So basically my laptop came with 1TB of HDD and right now I am only able to use like 500GB of it, the other 500GB seems to have gone missing and I can't seem to get it back.. I looked online and it told me to go on to disk management etc to try assign it but it doesn't seem to let me.. here are some screenshots..
[URL]
So as you may have noticed, the one I want to recover is that 383.83GB one but everything is greyed out so I can't format or anything!
Is there any way to remove eject from my internal drives. Windows 10
View 9 Repliesmy cd drive icon was showing and working then stopped showing up. I did as much research as I could and purchased AVG driver updater and it worked for a few days and won't work again.
View 1 RepliesMy Maxtor external hard drive is not showing under This PC, but is under Device Manager. Updating the driver comes back as driver is up to date. Changing Bios setting between UEFI and Legacy do not make a difference. Using a different USB port does not make a difference.
I can get full access to the drive if I boot up LinuxMint from a USB stick.
Microsoft says this is a manufacturers driver problem.
Acer says this is Windows problem.
I just bought a new hard drive from best buy, its a western digital Blue 500gb hard drive, the old one was failing and causing windows to run slow so I bought this one to fix it. When I try to install the new OS into the blank hard disk it doesnt show up on the list, nothing does.
View 4 RepliesBasically my story is, my previous laptop had a motherboard failure and I had some things on the hard drive that I wanted to recover. So I purchased a new laptop, put a ssd in it, installed windows 10, then I had a hard drive caddy lying about so I took out the optical drive of the laptop and installed the hard drive from my previous laptop with the assumption that I just take ownership of the drive and drag my stuff across to the (C: ) .
But after installing the hard drive successfully, it's now showing as the (E: ) it doesn't have all the files on it from my previous setup, instead it has the exact same files as the (C: ) . It's like whatever happened windows deleted the files and replaced them with the exact same files as the (C: ) ?I have a wordpress website on that drive that I really need to recover but absolutely no sign of any files from my previous windows 10 setup.
I have an odd issue where a Samsung SSD that is no longer in my system is still showing. The weird thing is if I bring up the properties, and then populate the fields of the drive (by pressing the populate button), it shows the capacity of the newer drive which is double the size. This drive is not a Samsung drive though. So I'm not sure what's going on here - see picture where it clearly states (at the top) that I'm looking at the properties of a 250GB Samsung drive, but the populated fields show it to be a 480GB drive.
View 17 RepliesI use Windows 10, but ever since upgrade from XP to windows 7, PSD thumbnails are not showing in windows explorer, as jpg and gif does.
Tried this solution but nothing changed:
How to enable Thumbnail view for Photoshop PSD files in Windows 7?
I noticed that when opening Desktop in Windows Explorer, it doesn't show any of the icons of This PC, My Documents, Network and Recycle Bin. I have enabled these icons to be shown on the Desktop through the "Desktop Icons Settings" option. However, Explorer ignores them and only shows icons that are manually put on the Desktop.
View 9 RepliesMy external drive(Samsung) connected via usb3 has started showing twice in file explorer. Opening either shows exactly the same files inside. Screen shot below, I've never tried this so I hope I've done it OK...
View 3 RepliesI have recently upgraded from Windows 8.1 Pro to Windows 10 Pro and everything was fine then. But recently I am experiencing an issue which is "Pinned items and Jump List are not displayed in File Explorer in both Taskbar and Start Menu". Pinned items and Jump Lists are displayed for other programs in Taskbar as usual but the issue is only with File Explorer. I have restarted the PC but still the problem persists and I have also disabled Cortana.
System Specs:
CPU - Intel Core 2 Duo
Motherboard - Gigabyte (G31M-ES2L)
RAM - 4 GB
Graphics Card - NVIDIA GTX 560 (2 GB)
OS - Windows 10 Pro (64 bit)
I have several server drives mapped to my Surface Pro 3 tablet, and from time to time they disappear from Windows Explorer and XYplorer (an Explorer replacement). They are still there and mapped, as Net Use shows them mapped properly. But to get them tho show up in either Explorer or XYplorer, I have to physically remap them (right click: Map Network Drive...) and when I do so they already show up with the proper drive connection but won't appear unless I finish the remapping. XYplorer has a tool to reconnect all network drives, but nothing happens there.
View 5 RepliesIn Windows 10 File Explorer keeps showing multiple Documents Folders then they disappear and come back again all without my doing anything.
View -1 RepliesMy new laptop has Windows10 pre-installed. It crashed and file explorer won't now show recent files. It seems to be showing recent folders but there are no recent files. Settings/personalisation/start shows "recently opened files" is turned "on" and File Explorer is showing on the Task Bar....
View 1 RepliesThis has suddenly happened, explorer is missing the 'space' information from the display.
The build up to this was simply creating a Windows disk image using W10's own utility. Mysteriously the space bar on the problem partition showed some usage, about 1.7Gb but nothing could be found in the partition. I've even tried deleting the partition in Disk Management and reassigning a drive letter but nothing gets the display back.
My new windows 10 only sees my PC - when searching for my files in Explorer, it cannot 'see' my two external drives when I plug them in. I've looked in Device Manager and they are not showing in there either. How can I tell Win 10 to access my external drives?
I thought Win 10 would automatically spot my external drivers the moment I plugged them in? Then it would go search for and install the appropriate drivers - but it isn't doing that..
