Drivers/Hardware :: F Drive Isn't Working
Aug 15, 2015
My F drive isn't working. I can't access it from my card reader or the card slot in my computer.Location is not available.F: is unavilable. If the location is on this PC, make sure the device or drive is connected or the disc is inserted, and then try again. If the location is on a network, make sure you're connected to the network or internet and then try again. If the location still can't be found, it might have been moved or deleted. I tried reassigning a new drive letter, but the computer won't let me. I also disabled and then enabled the drive to no avail.
View 2 Replies
Similar Messages:
Jul 31, 2015
This issue is as simple as the subject line. My DVD drive was working fine under Windows 7. In fact I even installed 10 from a burned DVD. Now it is completely MIA. No exclamation-marked devices on device manager or anything. I did try a couple solutions that were supposed to work on a similar problem on 8, namely registry changes, but they did no good.
View 9 Replies
Aug 10, 2015
Ever since I installed Windows 10 my Seagate Free agent back-up drive doesn't work. When I try to back-up my computer the Seagate manager says there's no drive connected. When I look on the file explorer the Seagate drive shows. but the the Seagate manager still shows no drives connected.
Is this a compatibility issue with Windows 10, or am I missing something?
View 5 Replies
Sep 24, 2015
my cd drive icon was showing and working then stopped showing up. I did as much research as I could and purchased AVG driver updater and it worked for a few days and won't work again.
View 1 Replies
Sep 9, 2015
When I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
View 9 Replies
Jan 14, 2016
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
View 2 Replies
Apr 14, 2016
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
View 9 Replies
Jan 9, 2016
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 Replies
Oct 24, 2015
I have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
View 6 Replies
Jan 19, 2016
have a problem with usb drivers according to my control panel which says it is fixing the issue and then tells me to reboot but it is not fixed. Keyboard lights up on start but when the first blue window appears it goes off. I can get into the bios ok and the keyboard works there. only one port is working (USB3). as my mouse and keyboard are usb and there is no PS2 port i am kinda cactus at the moment. Been searching for usb drivers for win 10 but not having any luck. Everything was working fine since November until yesterday.
View 2 Replies
Aug 9, 2015
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
View 2 Replies
Nov 6, 2015
I just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.
View 2 Replies
Aug 25, 2015
I installed windows 10 for my Asus laptop(which was running windows 8.1 pro and the mic worked perfectly) , and the microphone just doesn't work. I tried to install the latest win 10 drivers for Via, and that didn't work. Are there any fixes for this problem, or am I just out of luck?
View 1 Replies
Aug 19, 2015
So, I downloaded Windows 10 a week ago, and checked for updates, but no driver updates came up. But I know that my Video Card was out of date, as I kept getting an error and also, my Bluetooth is not working. Hence my point, is there any third party app that allows you to download and update drivers?
View 4 Replies
Nov 14, 2015
My laptop has failed, the hard drive has stopped working, my question is having purchased a 750gb replacement drive can I download win10 directly to it using my tablet and an external drive then install the drive into my laptop to complete the installation.
View 2 Replies
Sep 11, 2015
I recently upgraded to Windows 10 from 8.1. My disc drive wasn't working before the upgrade. In fact, before the upgrade, my computer didn't even recognize it HAD a disc drive. Now it recognized it, and when I go to the device manager, it says it is working properly. I tried doing an online search on how to fix this and tried a recommended command prompt, but that did not work either. I really want to use my disc drive.
View 1 Replies
Nov 16, 2015
I am completely wiping my hardrive with DBAN and doing a clean install of windows 10 with a dvd I created with the media creation tool. Will the fresh installation of windows come with a driver for ethernet cable so I can get on the internet.
I know I can get the drivers and put them on a usb to use after install, but I'm having trouble with malware on other computer and I don't want to transfer anything.It is windows 10 home on a 64 bit Toshiba Satellite C55-C5241 if that matters.
View 9 Replies
Jan 1, 2016
After downloading Windows 10 my disk drive has stopped recognising that I have any sort of disc in it, I believe this is because of the Windows 10 download as I was using it up until the point of the upgrade.
View 1 Replies
Mar 29, 2016
I cannot get my external hard drives to give me write permissions over my local network in some directions.I recently replaced our hard drives with SSDs and with the reinstall, I had some difficulty getting the permissions on my external hard drives working correctly.
I did several Google searches and read a procedure that I needed to go through adding a user called "Everyone" to each of my drives that I wanted to access and share. I did this and gave "Everyone" full read/write permissions and also went into advanced options (or wherever it is) and chose the checkbox to give all child files and folders these same permissions. It took ages but eventually it all seemed OK.
I had one folder which could not be corrected this way and ended up having go change each file individually. Anyway, I thought I was all set but if I try to move a file from Machine A to Machine B (the drives are attached to , I get an error that I don't have permission to do this. No overrides or Admin permissions are an option and when I check the specifics it *is* correctly shared with not only Everyone but this machine as well (so it attempted to fix the permissions itself at some point). However, if I go to Machine B and grab the files from Machine A over the network ...
View 7 Replies
Dec 5, 2015
I'm having with my cd/dvd drive. Since downloading Windows 10 the drive hasn't been working and doesn't show up in This PC. When I put a disk in it it Just spins around for a few seconds then stops. The odd thing is that the drive is recognized by Device Manager which says its working OK.
View 13 Replies
Dec 1, 2015
So overall, I was having a issue with creating a system image. It would state that "The specified backup storage location has the shadow copy storage on another volume (0x80780038)"
After reading several forums I found that if you delete the restore points you are able to create a system image.
During my troubleshooting, I was attempting to backup to a 64GBthumb drive (this worked in win8 and win7)..
As I was trying to use the thumb drive, I ran into the following issue..
First it says it needs to be formatted to NTFS. Once I format it to NTFS, it says "The drive is not a valid backup location"
Images I found - [URL] ....
I do not want to use any 3rd party software to accomplish this.
View 8 Replies
Dec 29, 2015
I recently set up a Homegroup on a Win10 laptop so I can see another PC on the network. That PC is running Win8.1, and I would like to use it for file backup. The devices are visible on both ends of the network and have connectivity, but when I choose to use the File Backup function from the laptop, nothing transfers and eventually I have to restart because of no response from the system. Also, my browser will stop working. I have added the PC as a network location and specified the location for backup, but is has locked up twice now. Could this be a routing issue? I previously ran the auto backup feature to a memory card, but need more space.
View 2 Replies
Sep 27, 2015
So apparently I don't have a dvd drive installed and I cant open any discs?
View 3 Replies
Jan 27, 2015
I installed Windows 10 as an upgrade to Windows 8. My Dell laptop does not see the DVD drive. I had no success getting the drive to work in Windows 8 and (maybe of course) it doesnt see it now. This seems to be a common problem I have tried numerous fixes but have not had success. What is the latest and greatest solution?
View 9 Replies
Aug 14, 2015
It really isn't my day. I recently upgraded to Windows 10 from Windows 7 and previously my DVD/CD Drive was working perfectly. Now, nowhere on my PC, and I mean nowhere, is my DVD/CD drive recognised as existing. There is no DVD drive showing in Device Manager or in Settings>Devices.
I have taken the side panel off my PC and all cables are properly plugged in.
I have not tampered with the BIOS at all.
View 9 Replies
Sep 3, 2015
I recently upgraded from Windows 8 to 10. Post upgrade I have just realized my DVD Drive is not observable/findable in the File manager. It is also not observable in the device manager.
It is however, powered up and is recognized in the BIOS Menu as Sata 4 and recognized by the computer as Boot Device one.
The computer will boot from the DvD Drive if I put a bootable DVD (my old windows 8.1 disc in this case) in the drive, I just tested this.
View 4 Replies
