Drivers/Hardware :: Files And Folders Not Showing On External Devices
Sep 10, 2015
I have this issue where the files and folders on an external device (such as an external HDD and USB) are not showing up, yet the device is visible. I only started getting this issue after I connected my USB to another computer which makes me think a virus caused this. Here's where I am at:
The drive in question is the "STEAM GAMES (F:)" drive. It shows up in explorer as shown:
And when opened, this is what's inside the F drive:
By showing hidden files and not hiding protected operating system files, this is what shows:
What I've tried:
The command "attrib -h -s -r -a /s /d F:*.*" returns this: Full system scan using Anti-MalwareBytes and Avast! reveals nothing.Running RKill, UsbFix, RogueKiller, and iExplore.exe does not fix the problem.
View 1 Replies
Similar Messages:
Dec 10, 2015
II am having trouble moving data to external sources via USB. It always happens partwaY through a transfer. It gives me messages like the transfer could not be completed, that the device is no longer found, or the files aren't available. Most times when I restart it the transfer gets a bit further than it did the time before, but never by much and when moving large amounts of files it makes transferring my media and data impossible.
Sometimes, after the computer is unsuccessful with the transfer the device is no longer recognized by the computer at all. It will call it an unknown device with ? next to it in the device manager. I try to install the drivers automatically but it just tells me I am using the newest drivers but will not register what the device is or allow me to view or transfer files on the device. Usually there is no problem transferring data from a usb connected drive to a different place on the same drive. It happens on both of my systems: An acer aspire one running windows 7, and a compaq presario running windows 10. It happens with all the usb ports (3 on each system). It happens even when I use several other cables to try to connect the device.
I seem to be able to copy files from the drives to the computer, but when writing to the drives it gets stuck. It happens with 2 external hard drives, 2 phones, 4 usb drives, a tablet, and sd cards. What is going on here? I don't think I could have that many bad cables and usb ports. If there is something wrong with write protection, wouldn't it just not transfer anything at all? I have checked for viruses. I can still play songs and look at pictures from the drives so I know the files aren't completely corrupted.
View 1 Replies
Dec 31, 2015
I'm having trouble with USB devices not showing up in windows explorer. I put in a thumb drive with data on it, but it's not in win explorer. I went to device manager and found the TD under disk drives. Also my external 3T G: disk drive is there. The thing is that my G: drive shows up twice in win explorer, once as a disk drive and the other as an expansion drive. I still can't see the TD. So how can I look at the drive or do anything with it. The light on it is on and the computer see's it, but no way to access it. I have the latest windows updates. I have all usb and hid unchecked for the computer to put them to sleep if not used, but that doesn't work.
View 9 Replies
Jan 14, 2016
I have an external hard drive that I have used regularly with a Windows 7 machine via esata
that does not show up when plugged into my Windows 10 notebook via USB.
I can see it under the disk management, but there is no drive letter assigned so I cannot access it.
View 4 Replies
Dec 23, 2015
The Conexant HD Audio Sound Driver was replace by High Definition Audio Device after i update to Windows 10 Home Version 1511 from 1011
Now if i want to plug my earphones to the left side of the computer where the audio jack socket is located the sound does not transfer to my earphones except i will change the default sound device from speakers to headphones.
How can i set it to automatically when i plugin my headphones/earphones/external speaker automatically transfer the sound to this device without changing the settings?
View 1 Replies
Oct 2, 2015
Laptop Samsung NP300V5A. Sound stops working about a month after Win 10 upgrade. No changes done at the time.Audio devices show up under Device Manager, but not under Playback/Recording Devices. Same for Realtek Sound Manager - it doesn't see the devices. I can install, delete and update drivers under Device manager but it doesn't make any difference. It is not a physical problem, tested on Linux live CD.
Solutions tried:
-Installing various versions of HD Realtek Drivers (including windows update version)
-Installing/Removing Realtek software.
-Enabling/Disabling devices under Device Manager
-Called spirits of ancestors. Seemed like it worked for a while, but ended up being a joke.
-Did system restore to various dates.
-Restarted in safe mode
-Restarted various services such as Windows Audio, Windows Audio Endpoint Builder, Plug'n'Pray, Power, etc.
-Checked system, application and driver even logs.
-Tried a couple of registry fixes. Angered spirits of ancestors. Turning gray..
-Reinstalled chipset drivers
-Rebooted about 30 times
-Sound Device Troubleshooting finds no issues
-Display Disabled Devices is enabled
View 1 Replies
Sep 24, 2015
I installed Windows 10, and after signing in with my Microsoft account I remembered to rename the PC from the DESKTOP-blah name to something more memorable. However, when I look at the devices in my Microsoft account settings [URL] ... I still see the old name. I've removed the PC from the MS account devices, and switched to a local account on the PC then back to my MS account again, but it re-adds the PC with the old name each time.
How I get my MS account to forget about the old name altogether?
View 9 Replies
Apr 14, 2016
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
View 9 Replies
Feb 23, 2016
I am running Windows 10 and trying to set up a network so that I can transfer photos from an android phone onto my laptop hard drive for back up. I've been using an app to do this and it has worked in the past brilliantly (called "Sweet Home" if interested). Unfortunately since upgrading to Windows 10 and changing my phone it doesn't work. I have also been trying to test the network using ES File Explorer. I have tried setting this up on another laptop running Windows 8 and it works no problem, so the issue must be with my settings.
I have set up a home group, made sure everything is shared where it should be and permissions set so that the network should be visible to everyone, but the android device can't see the network at all. For reference when setting up the network I followed the step by step in the link below on the Windows 8 laptop and it worked.
[URL] ..
One strange point that I think might be related on the Windows 10 laptop, is when I get to Step 2 (of the link above) under "How to enable sharing on Windows?" the "Share" button is greyed out, even when the folder is not shared. I have to share it by clicking the "Advanced Sharing" button instead.
View 1 Replies
Jan 13, 2016
My external drive(Samsung) connected via usb3 has started showing twice in file explorer. Opening either shows exactly the same files inside. Screen shot below, I've never tried this so I hope I've done it OK...
View 3 Replies
Jul 29, 2015
My Maxtor external hard drive is not showing under This PC, but is under Device Manager. Updating the driver comes back as driver is up to date. Changing Bios setting between UEFI and Legacy do not make a difference. Using a different USB port does not make a difference.
I can get full access to the drive if I boot up LinuxMint from a USB stick.
Microsoft says this is a manufacturers driver problem.
Acer says this is Windows problem.
View 1 Replies
Sep 1, 2015
External speakers were working fine, then update to Win10 now external speakers not even recognized. They don't show up as a connected device. speakers on monitor won't work either.
View 1 Replies
Aug 15, 2015
My new windows 10 only sees my PC - when searching for my files in Explorer, it cannot 'see' my two external drives when I plug them in. I've looked in Device Manager and they are not showing in there either. How can I tell Win 10 to access my external drives?
I thought Win 10 would automatically spot my external drivers the moment I plugged them in? Then it would go search for and install the appropriate drivers - but it isn't doing that..
View 2 Replies
Nov 20, 2015
I have the option "Show recently opened items in Jump Lists on Start or the taskbar" off.
However since the last update whenever I either copy or move a file into any folder windows puts that folder under the Recent group in the taskbar.
View 1 Replies
Sep 24, 2015
my cd drive icon was showing and working then stopped showing up. I did as much research as I could and purchased AVG driver updater and it worked for a few days and won't work again.
View 1 Replies
Mar 5, 2016
so before I wiped my entire PC the sound was working flawlessly - I would use the audio inputs for the Razer Blackwidow Chroma and it would work perfectly.Since the reset however, no sound has been discoverable, I get a red x on my speaker, and it says "No audio drivers installed" on "Playback Devices" I have tried putting my headphones in every audio jack on my PC (front, back and keyboard) and it still isn't picking my headphones up, I have installed the latest drivers and still no joy.
View 1 Replies
Oct 21, 2015
Windows 10 should find new drivers through the update mechanism, which doesnt work always though. And if you go into device manager and click on a device and do a look for new drivers, it always finds new ones with a high chance. But it' just stupid to click all 100 devices single through. Isnt there a smart way to do this? Why isnt there an option for search and download all devices drivers.
View 7 Replies
Dec 22, 2015
When I'm accessing my media library on the computer with my phone it does show all movies/songs in the same folder. I have chosen to share different folders like, E:movies E:kids E:adults C:user*videos. all those folders are shown as only one folder on the device i'm accessing my library with. Sub-folders within the paths does show.
In Windows 7 the folders did not batch up as only one folder, each path was shown separately.
View 1 Replies
Feb 10, 2016
I use4 a local account, no MSA. I want to use OneDrive as a repository that automatically syncs files I place there with the Microsoft Cloud so I can access those files and folders from other computers.Right now, after a Clean Install, OneDrive has a lot of folders I don't wnat there, so how do I get rid of most of them?
View 5 Replies
Jan 1, 2016
In Windows 10 File Explorer keeps showing multiple Documents Folders then they disappear and come back again all without my doing anything.
View -1 Replies
Aug 6, 2015
This old error suddenly seems to have come back again
Some duplicate folders showing up again. (Note I CLEAN re-installed W10 after an upgrade - legally activated).
View 6 Replies
Aug 16, 2015
I have recently upgraded to Windows 10. I have a homegroup setup on my home network which allows me to share the music files stored on my PC with phones & tablets etc for streaming.
Since the upgrade when I access the files using Apps like BubbleUPnP or MConnect the music files are all shown in one giant folder rather than being sorted into the sub folders (Artist, Album etc) as it is on my PC.
This problem has only occurred since upgrading to 10. I reverted to 7 to check and everything went back to normal.
Is there a setting or checkbox I am missing?
View 1 Replies
Sep 13, 2015
I gave up on trying to do a clean install, so I just deleted every single program in control panel.
All of my drivers were either automatically updated or I was able to update them myself.
These three are listed as unknown. The drivers won't update.
I ran the Intel Driver Update Utility, and it said no drivers found.
I checked the Asus driver page, and the driver list barely had anything at all.
Pretty sure these are named something like thermal, collaborative, and something else.
View 3 Replies
Sep 4, 2015
I've been using Win10 since the general release. This was an update install on a Win7 laptop.Apart from a few issues (waking from sleep on scheduled tasks, lack of control on updates) I have a problem with external devices.
If I use several USB flash drives/harddrive I'm able to eject one or two but then I can't eject any others. When this happens I don't get the menu option to eject/safely remove the device through "explorer" and the drive doesn't appear in the "safely remove" icon on the task bar. I can still access the drive without issue just don't have any way to eject except to shutdown the laptop. If I reboot the laptop but leave the device attached the eject option reappears.
The laptop is fully patched and I can't work out what is happening and google hasn't revealed any similar problems except the normal "device is in use" message.
View 9 Replies
Dec 19, 2015
Since my PC was updated to Windows 10 I have been having trouble with USB devices not working. It appears the drivers do not load or do not work. Example is my Saitek rudder pedals. They appear to be fully installed and appear in the device list but they do not work. I go into the device manager and update the driver to the exact same driver and it works. I plug in my iPhone and it is recognized as an iPhone but appears in the Other Devices with a yellow exclamation. A check and it says there are no drivers. Manually find the drivers and update them and it is good until I pull it out. Next time I plug it in same thing. Phantom 3 pro wont show the disk drive and have to load in a generic disk drive driver and all good. This list goes on.
View 1 Replies
Aug 30, 2015
Windows 10 did an update on my wife's desktop that was incompatible with the Nvidia graphic drivers on it. As a result, the dual monitors no longer display. We took the computer to the local Microsoft store and they were fully aware of the problem and are working on it. But, after two weeks, the problem has not been solved. Meanwhile we bought a new desktop and had Microsoft empty the entire contents of the C: drive onto an external hard drive. They did and showed me that the external drive contained the root directory and program data that contains years of work using Lightroom.
I brought the external hard drive home and connected it. Luckily I can see the User Libraries but not the Program Data. Is there some way that I can make everything visible in the external hard drive so that I can copy the contents to the new desktop?
View 9 Replies
