Drivers/Hardware :: Front Panel Audio Detection Is All Mixed Up
Oct 31, 2015
Issue i'm having with using my headset in my front panels and I can't figure out what's up.
If I plug the green headphone jack into the headphone port the pop up comes up and tells me this is the pink mic port. Gives me the option to select from headphone, mic, front speaker etc..
If i plug the pink mic jack into the microphone port it thinks this is the green headphone port and no option to select Mic.
Why are these reversed? The HD audio connector is connected correctly to my motherboard (only goes on one way anyway)
View 9 Replies
Similar Messages:
Apr 16, 2015
Realtek driver version: R2.75 [The problem was still there when I used default audio drivers shipped with Windows].
I've been trying to get my system audio front panel to work for a longg time now. I am using build 10041 and the issue still persisted. This is the 3rd build since I've started using Windows 10 and I am still not able to solve the problem. I need front panel to work because my built in audio back panel female jacks decided not to work. When I use back panel, I frequently keep getting "Audio plugged" and "Audio unplugged" popups and there's no audio. I believe it's with the ports. I've permanently started using front panel which works perfectly fine in Windows 7 but not at all in Windows 10 preview.
Here are all the screenshots that I took to explain things in details.
Image 1:
Image 2:
Image 3: - No front panel option.
Image 4:
Image 5:
Image 6:
Image 7:
Image 8:
View 5 Replies
Aug 12, 2015
I recently installed Windows 10. But the drivers for my VIA soundchip which came with the motherboard don't work with it. I am able to install it but when I try to run HDVdeck it doesn't open. It did work in W8.1. Any fix?? Or can I disable front jack detection any other way??
View 1 Replies
Nov 19, 2015
I am having audio problems that I have been unable to resolve. My pc specs and problem below. So since I upgraded to Windows 10 one of the biggest things that annoys me is when I plug in headphones they are not picked up by my pc and I have to manually switch to them as default audio using the Playback devices menu. On Windows 7 I had a Audio Control panel that popped up and detected the headphones.
I am also having issues with the volume sounding low throughout and terrible call quality on skype not sure if this is a separate issue, I have tried manually updating, removing & reinstalling the audio drivers from the device manager and also tried downloading the realtek windows 10 drivers. None of these have seemed to work, I have tried software that detects out of date drivers to no avail and also made sure other components on my pc are updated incase this somehow worked.
PC Specs :
POWER SUPPLY - atx power supply stp 650watt
MOTHERBOARD - asus P8B75-M LX
Ram - 8GB
CPU - Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
GPU - NVIDIA GeForce GTX 660
Harddrive - 1TB Operating
[Code] ....
View 9 Replies
Mar 2, 2016
I recently upgraded my PC case and for some reason whenever I plug in a USB device Windows doesn't seem to go with it. In device manager when I go onto the connected USB device properties it says "Windows has stopped this device because it has reported problems. (Code 43)". I'm currently running Windows 10.
View 1 Replies
Oct 3, 2015
I just bought a new PC and installed W10 (previously was using W7) and when i plugged my headphones to front jack i did not have any sound at all. I googled for some time to find a solution and found that i have to check "Disable front panel jack detection" and i got the sound, BUT the sound was only in one side. When i was testing in Realtek HD Audio Manager it also played sound only in one side.
Headphones work fine so it probably is Windows glitch.also tried to uninstall & reinstall drivers for Realtek HD Audio.
View 2 Replies
Jan 22, 2016
I have bought Gold Touch HDDS-U3 docking station, I plugged both usb cables to the computer (one to SSUsb port and one to regular port), waiting for 30 minutes while it was turn off (for battery charging). After that I insert a 3.5' HDD and turn it on. Nothing happen. there is no red or green light and the device doesn't appear in Disks Management.
View 1 Replies
Jan 9, 2016
I updated to the latest drivers for Intel AVStream Camera on my tablet / laptop. After the update, only the front camera works now.
View 1 Replies
Oct 23, 2015
I have just copied some photos from my old laptop onto my new one which has windows 10. The photos were sorted into folders called 'boat', 'pets', 'family', 'trees', 'for printing' etc each containing photos taken on more than one occasion. Now on my new laptop they are sorted into date folders and all my photos are mixed up.How do I get my folders back and how do I make sure this doesn't happen next time I copy photos across?
View 3 Replies
Oct 13, 2014
I'll first describe my LANs network environment. Three Windows PCs and one Linux PC. Each PC is sharing one folder called TEMP.
The PCs:
WIN10 - Windows 10 TP (non-enterprise edition)
WINXP - Windows XP Pro SP3
WINXP0 - Windows XP Home SP3
CENTOS - CentOS 6.5
Using NetBIOS over TCP/IP on each PCs for name and IP address resolution
No hosts file contains the names of the LANs PCs
The Computer Browser service is active on WIN10
The Computer Browser service is disabled on all the other Windows PCs
Samba services on CENTOS is on but the master browser in the WIN10 PC
Firewalls on all PCs is off except for WIN10 but the rules allow file/printer service through The same primary user account is used to logon to each PC No HomeGroup networking used. All PCs are in the same workgroup=LANSYS
Now with all that stated, I'll describe the problem. From WIN10, I can see the list of PCs in the workgroup and access the shared folder TEMP on each PC
From WINXP, I cannot see the list of PCs in the workgroup and can only access the shared folder TEMP on the other PCs when I use the IP address of those PCs in either My Network Places, Internet Explorer or Windows Explorer. I always receive the "Workgroup not accessible ...." popup window when attempting to view LANSYS from My Network Places.
From WINXP0, it's the same as WINXP
From CENTOS, in order to see shares I use the smbclient command. When I execute the command for WIN10, the command fails and reports that NetBIOS over TCP/IP is disabled on WIN10
But NetBIOS has to working on the LAN because I can ping each PC from any PC. I executed ipconfig/all on each Windows PC and it displays NetBIOS is enabled.
So it appears that NetBIOS Sessions service over port 139 inbound traffic on WIN10 is either buggy, crippled, or broken.
View 19 Replies
Jul 29, 2015
Just like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
View 9 Replies
Jul 17, 2015
I'm using build 10240, and in the first install, it installed the Realtek audio drivers.
The problem with these drivers is that they completely mess up the sound in my headphones.
Anyways, I've tried : Uninstalling the audio manager in control panelDeleting the oem#.infUninstalling the drivers in Device Manager
None of these work. When I uninstall it, the driver is just reinstalled when my computer reboots.
View 9 Replies
Mar 5, 2016
so before I wiped my entire PC the sound was working flawlessly - I would use the audio inputs for the Razer Blackwidow Chroma and it would work perfectly.Since the reset however, no sound has been discoverable, I get a red x on my speaker, and it says "No audio drivers installed" on "Playback Devices" I have tried putting my headphones in every audio jack on my PC (front, back and keyboard) and it still isn't picking my headphones up, I have installed the latest drivers and still no joy.
View 1 Replies
Aug 25, 2015
I installed windows 10 for my Asus laptop(which was running windows 8.1 pro and the mic worked perfectly) , and the microphone just doesn't work. I tried to install the latest win 10 drivers for Via, and that didn't work. Are there any fixes for this problem, or am I just out of luck?
View 1 Replies
Jan 14, 2016
Today I updated my laptop to latest build of windows. After that I found "No Audio Output Device Is Installed" message. I reinstalled audio drivers from Dell (Audio_Driver_PKGMR_WN32_6.0.1.7564_A01) Still no sound. I checked device manager it shows, Other Devices-High Definition Auduio-PCI Device, both have exclamation mark in yellow triangle. (See attachment) I am puzzled what should I do next.
View 4 Replies
Aug 9, 2015
I just upgraded to Windows 10 recently, and so far (for the most part) it's working great!The only issue I have is that some windows won't focus and stay on top when I alt-tab to it or click it, like it did in all other versions of Windows.
For example: I have Chrome open on top, I alt-tab my music player (which is in a small window), and the music player goes in front, but when I click the Chrome in the back of the player, the player stays in front, covering parts of the screen. This happens to multiple programs I run.
Besides this issue, sometimes when I alt-tab to a program, it just doesn't even show up in-front of whatever other program I have currently on top.
View 2 Replies
Nov 20, 2015
Basically I installed onedrive for the first time on my computer, and I got a threat warning by my eset virus scanner. The message was something like c nedriveTemp followed by a long series of numbers. I tried to scan and delete the file but it keeps coming back. That threat message keeps notifying me like every 10 min.
View 1 Replies
Aug 26, 2015
Since I upgraded to 10 I have an issue that occurs when I have multiple windows open; when I click the taskbar to switch program to something that is already minimised or in the background, such as a new settings screen, or any other screen which doesn't automatically maximise to full screen resolution, it will just disappear behind all other open windows. So for example, if I have chrome open and want to go to steam (or anything either unopened, minimised or in the background) I would click on the program in taskbar, the screen will flash up - but as soon as I move my cursor towards it (ie away from the taskbar), the screen that is already open will take priority and send the new screen to the back. This is rather frustrating and I've never had this problem before.
I'm not sure whether it is a taskbar problem or a window priority issue? But, I just can't seem to fix the issue.
To temporarily solve it, I have had to minimise all windows to get to the new window that I want - as it will just go to the back (unless I either quickly move my mouse to it, or if the screen is maximised and at the top already) and this isn't ideal.
View 1 Replies
Jan 1, 2016
The hover-event response time is too fast , and it triggers unwanted events. How can i shut off the hover-event detection or drastically slow it down ?
View 4 Replies
Aug 15, 2015
I have upgraded to windows 10 about a week ago but everytime I turn my pc on, it says HVECK is not supported by this OS. My audio driver is VIA High Definition Audio driver. It seems like they dont have an updated driver for windows 10. What do I do? Can I change to Realtek instead of VIA? I mean is that possible to use a different audio driver? Like, uninstall VIA completely and install Realtek?
View 4 Replies
Feb 10, 2016
I'm using a Surface Pro 2. After my upgrade from Windows 8.1 to Windows 10, I'm not getting any audio out from the DisplayPort. I use DisplayPort to HDMI to a receiver. I've upgraded to the latest RealTek audio drivers, but it's not working. Could there be a different driver issue at play?
View 4 Replies
Aug 7, 2015
I installed Windows 10 today, but since installing it, i have had no sound/audio. The only sound driver I have is NVIDIA High Definition Audio, but it cannot be selected as "default device".
View 6 Replies
Oct 9, 2015
I installed W10 on my laptop yesterday, a friend has problems with his copy of W10. Everything is fine for me, and he has now put W10 on again and all seems to working EXCEPT, he has not got a volume control icon in his taskbar - although sound IS working. I researched and told him about the wheeze of changing the text size in display - which has resolved that problem for many folk, but he found he could not move the cursor along the bar, and has also noticed that although the volume is set to 'on' where you select which icons appear in taskbar, there is a message saying 'audio service is not running'.
View 2 Replies
Dec 31, 2015
so i just wanted to install the lasted version of the driver and when i try to install the driver it will keep on restarting over and over again after it says its done and needs to restart and when the computer turns back on it does the exact install over and over again and it never finishes but my realtek driver still works.
View 1 Replies
Oct 31, 2015
Today, I upgraded my Toshiba Laptop to Windows 10, it was previously windows 8 but the computer was windows 7 default. My sound was working fine until I installed Windows 10..I upgraded to Win10 and I played a youtube video and I hear choppy glitchy like sounds few once in a while.. How do I stop it from chopping out? My brother has the same computer as me and he upgraded, his doesn't make the choppy sound. I tried with his headphones in my computer, it still occurred. How do I stop it from chopping out?
View 8 Replies
Nov 28, 2015
I just recently purchase a newish laptop recently off eBay. Its a HP ProBook 6470b, it didn't came with a hard drive so I pulled the SSD out of my old Dell 1545 which has windows 10 preinstalled. Long story short when I listen to music over Bluetooth to my stereo, the sound become very choppy and distorted. Specially if I do some typing, extreme processing or moving the trackpad it becomes really bad. If I don't type, move my mouse or have it idle on the music player its fine (most of the time).
I should mention at this present moment I don't have a hard disk caddy since I didn't come with one and I'm waiting it to arrive from Malaysia (so I'm just curious if that could be a culprit). I have tried different Bluetooth speakers and the same problem persists. I have tried my macbook, android tablet, surface and phone with the same reciever and it play musics without any problem whatsoever. I have tried updating, uninstalling and installing drivers and hasn't made that many difference (although disabling the Microsoft UE LE Eliminator useful somewhat). The driver is a broadcomm 20702 Bluetooth 4.0 adapter.
I have disable any enhancement in the sound settings and gone to devices and printer and disable any unnecessary services that is used by my bluetooth receiver but the problem is still present.
View 1 Replies
