Drivers/Hardware :: HP Envy 5530 Printer Software Won't Install
Dec 8, 2015
I can't use my printer after I upgraded to Windows 10. My HP Envy 5530 printer is not shown in the printers and drivers in my control panel. I tried to add my printer in the control panel. It searched the network for my printer and they found it. I click on my HP printer on the screen so it can be installed, but after I click on my printer I get an error screen. I tried to disable my firewall and I still could not get my printer installed.
I downloaded the latest update of the printer software and it won't let me install it. I uninstalled my printer software and it won't let me install the downloaded software. I tried using the HP Print and Scan Dr on my computer and it hasn't offered any way. I've only gotten troubleshooting for trying to fix a printer with a wire connection. My printer is a wireless connection they don't offer any troubleshooting for a wireless printer. I don't know what to do so I can actually use my printer again. I can't find a solution by searching online. How can I get my computer to install the printer software?
I Have an HP4500 Envy and the HP printer won't function. When I uninstall the software and re load I keep getting a screen asking for location of printer or an address of printer but when I input the info nothing happens. I"m at the point of getting rid of the printer because of the problems and lack of support from HP.
New to 10 and unable to install Samsung printer ML1210. printer remains offline but shows samsung universal printer driver installed. I understand this is a recognised problem
i've updated to windows 10 on my pc and i'm unable to download the driver for my epson sx235w printer to my pc. i've tried the install disc and also via the drivers online. each time it starts to download the drivers it gets stuck on the download part with the spinning wheel for at least 30mins.
the printer was working perfectly on windows 8 via a usb cable, but since going to windows 10 the printer isnt recognised and the drivers wont install.
Since changing to W10 I am unable to install the above on my lap top, both worked fine on my old vista machine, little notice comes saying something like ..incompatable with the O.S, is there away to get around this ?
The printer, an Epson DX4400 is a few years old I know, but it is still very good and I dont really want to get rid of it.
I upgrades to Win 10 the the above network/wireless printer worked fine. I've now done a fresh install and it doesn't!
The scanning function works but trying to print produces an error. I've been advised by Samsung support that their driver doesn't support Win 10 and that they don't know when a new version will be released. They said it would still function under the upgrade as it still had access to the old Win 7 drivers there.
Any way of making the Win 7 drivers available on a fresh Win 10 install?
The issue is I have a network printer selected as the default in Windows 10. I have the option "Let Windows manage my default printer" turned off. At one point randomly, the default printer goes back to the Adobe PDF as the default.
Steps taken:
* I have checked the registry settings to ensure that the options "let Windows manage my default printer" is switched off. I can confirm this. * Switched the default printer back to the network printer and performed a reboot. The network printer remains as the default. At some point of the day it goes back to Adobe PDF.
I thought the USB 3 slots were BLUE by convention. On my Envy Laptop there is one BLUE slot - it's also a charging USB slot. However a Toshiba external USB3 device plugged into that slot has a WHITE Led when active indicating USB 2 speed.
I move the HDD to one of a pair of USB slots on the other side of the computer --not colour coded at all --and Hey presto the Toshiba HDD led goes BLUE indicating it's operating as a USB 3 device. Copying files also indicates it's operating at expected speed whereas connected into what I thought was the "Official" USB 3 slot only gave USB 2 data transfer speeds.
Shows you need to TEST the devices - don't always rely on external labeling etc.
My PC is the HP ENVY TouchSmart M7-J120DX with Beats Audio quad speakers and two subwoofers. After running a clean installation of Windows 10, my volume icon had an error "no audio device output" / IDT High Definition Audio Codec. The troubleshooting option did nothing. I uninstalled my audio device, and restarted my pc. My sound is back, but it seems that the middle speakers are the only ones working. My volume icon and sound device now is labeled "High Definition Audio Device" which now sounds substandard, just like those cheap tinny speakers you can find at the dollar store. How to recover my original great-sounding original speakers!
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
i have an older lexmark monochrome laser printer. it was working fine until the most recent win 10 upgrade, now i can no longer install it as the default printer or print to it. I have removed the printer and reinstalled it. I have updated the drivers. I can see the printer in the devices list. I cannot set it as default printer. The manufacturer say it is compatible with win 10 but I cannot print to it. I would like to be able to use it as my default printer and only go to my injet when I need color copies.
Don't know if this is the right area but when I try to add my Canon MP 600 printer I can't. Have tried to follow the instructions when I click on add printer but it's all Chinese to me.
HP 1512 all in one printer only has a usb connection (not wireless) It was connected and worked in Win 7 but would not work in Win 10. Win 10 does not recognize the connection during installation.
I followed the directions in the printer support, disconnected and reconnected, uninstalled and reinstalled, got HP to connect to my computer, and worked on it for 2 days. Now I have no Printer Support files (HP Techs deleted too much?)
After upgrading to Windows 10, the scanning on my HP printer doesn't work. The other printer functions work o.k.Should I simply delete the printer and reinstall it?
After I installed windows 10 my printer won't print. It shoots out the paper but it is blank. I checked and all the drivers are up too date. I use a Canon MX860 All in one. It worked fine on Vista, 7 & 8.
I have no printer notification when I'm printing. In the control panel -> devices and printer -> printerserver properties these are enabled. I have no hiden icons in the taskbar. I tried in the windows registry the setting from windows 7:
HKEY_CURRENT_USERPrintersSettingsEnableBalloonNotificationsRemote and HKEY_CURRENT_USERPrintersSettingsEnableBalloonNotificationsLocal.
But this also don't work. I'm printing to and HP Deskjet 895 CXI on an WIndows Home Server 2011. On my Windows 7 Pro machine the notification is present.
I was trying to add a printer and I had the message that the printer spooler don't work! I tried 3 different ways manually via command prompt and via windows devices system and force start automatically but nothing. it cant start. Some messages i got trying to fix it it was there are no resources for this operation!
I have a default printer which is a network printer for 99% of my printing. However, I do use a local printer when printing checks.
I have the default set to the network printer and that is what I have set for the past several years through Windows 7 and now with my Windows 10 setup.
Since the latest November update, my computer keeps changing the default printer back to my local printer for no apparent reason and without notice. So when I go to print something, if I don't take care to check, I send it to print on my checks.
This is a new behavior over the past few days - the default printer becomes unchecked, leaving me unable to print. Happens with or without a reboot. This would be relatively easy to fix each time, except that the Devices & Printers page takes 30-60 seconds to open
why my print spooler keeps shutting off since i loaded W10. I have a HP ENVY and have tried to run both printers that worked prior to the install. Both work on the other laptop that isnt running W10.
Tried to set up my Canon CP720 photo printer today. Canon say they have no drivers available, found one on Cnet which I downloaded to old laptop still on Vista but when I try to install it using 10 it says that this version of windows cannot download a printer driver.