I am having issue re-installing the windows 10 Officejet L7680 software. I get to the end where it is configuring the software and get a fatal error hpzsetup.exe -wstub 39464. I have tried un-installing and re-installing still no luck.
View 7 RepliesI've repeatedly attempted this, but always get "An error occurred during setup. Restart your computer, then run setup again". This is an all too typical message you can find associated with many Epson products.
I've tried:
-Clean boot
-Safe mode (install enabled)
-Using an Epson removal tool I finally obtained after my 5th chat with Epson.
-An Epson fix deleting temp folder and looking for setup.exe that never appeared.
-Manually removing all Epson folders and registry entries I can find.
-Disabling firewall and AV
The same CD installed ok on my 6 year-old laptop (both run Windows x64).
I've run SFC /Scannow - ok
At best, the scanner is recognised as being connected when plugged in, and appears with a yellow trangle under 'Other Devices' in Device Manager.
I've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times.
Windows 7 Ultimate 64bit SP1
Intel Core i7-2600 CPU
16gb Ram
AMD Radeon R9 380 Series
Single monitor
After I uninstalled catalyst control centre (because I was having problems with it). When I restarted my mouse and keyboard weren't working. So I tried a ps2 kb and mouse and this worked. I went to device manager a looked at the USB devices, all of them had a yellow warning sign next to the devices. I checked each one and they all had error 39 (missing or corrupted drivers). I tried updating and uninstalling the devices with no avail. How can I fix this?
View 1 RepliesJust trying to add a wireless wifi printer that's on my network and I'm running into this error.
View 1 RepliesThere may be something simple I'm overlooking here, but recently I've noticed that audio on my computer (music, videos, games) every so often plays a glitchy sound, and the video and music lag for the same time period. It's an occurrence that happens fairly frequently but not predictably (i.e. there is no pattern to it at all). It's as if the audio "stutters".
It's not the fact that I'm running a lot of power-hungry programs (happens when, for example, five programs are running or only one); it makes no difference where the programs are stored (i.e. SSD or HDD) and, for that matter, I don't believe it's hardware-related at all as this does not happen on my parallel Xubuntu install; it's not due to lack of disk space nor running background processes.
It's not hugely detrimental to my work but it is becoming a mild-to-moderate annoyance whenever I do anything multimedia-related.
Note: It may also be related (but is a different set of symptoms) that when playing MS Solitaire Collection for long periods of time, the game will begin to freeze altogether for short periods of time, this time periodically and predictably and longer than any other game. "Long periods of time" is anything over about ten-fifteen minutes, and the freezing gets worse the longer I play.
I just upgraded to Windows 10 OS. It doesn't recognize my iPod. When I attach to the USB port, I get a message there's a problem with this drive. Then, Disc Check can't be performed because Windows can't access the disk. When I open Settings > Devices, the message says iPod Driver error.
I expect I need a new Driver installed.
I have been attempting to run a USB Network Adapter on my new computer, but I get an error saying that it has no driver.
I've been trying to find a way to work around this error, but I have had no success.
Here is the Hardware Ids:
USBVID_0434&PID_7500&REV_0100
USBVID_0424&PID_7500
Since some weeks my usbs stopped working, including the mouse and keyboard. Fortunately I have remote desktop enabled and I could access to the computer. What I saw is that in every boot the usb chipset go to error state with code 10 (The message is: Insufficient system resources exist to complete the API).
I tried uninstalling and reinstalling the driver, updating it , disabling and enabling, using troubleshooter and reinstalling the usb.inf. The only that enables ok the usbs is disabling and enabling it, but when I reboot, error 10 again.
I don't know what to do. I found in other sites that the solution is only perform a repair install or format the computer and because I don't want formatting the computer I want to know if there are other options that would repair my usbs.
I can't print due to the "print queue full" error.
I have uninstalled an re-installed my printer drivers several times and had no luck.
Printer says its ready but I cannot print from any application. Printing troubleshooter finds no problems.
My external hard drive is showing an error.
G: is not accessible.
The disk structure is corrupted and unreadable.
How to fix it without formatting it? Have a lot of file on there that I'd like to recover if possible.
I've got the error code 52 in device manager for all 3 imaging devices (an internal and an external web cameras and an HP scanner). I was using Windows 8.1 on my Toshiba Satellite laptop and upgraded to Windows 10 Home edition a few months ago. All the time the imaging devices worked normally and I seemingly some Windows update resulted in to code 52 (Windows cannot verify the digital signature for the drivers required for this device).
Unfortunately returning to previous restore points did not work. I tried to remove the upper limit filter which I found in the registry key HKEY_LOCAL_MACHINESYSTEMControlSet001ControlClass{6bdd1fc6-810f-11d0-bec7-08002be2092f}. As the result the yellow triangles and errors with code 52 disappeared and scanner could work, but both cameras still fail to work. So I restored the registry to the previous state. All the drivers are up to date.
Upgraded to Windows 10 about three days ago, and now my HP Laserjet P1006 printer won't print.......keeps saying "error" .Went to HP's website and down loaded what I thought I needed to get it to print but still not printing.
View 9 RepliesI have a Toshiba that I upgraded from Windows 7 Vista to Windows 10, but has no Bluetooth capabilities whatsoever, yet every time I shut down and turn my computer back on, whether it may be an update or just manual, I end up in the corner of settings with Bluetooth search on. I can't disable it because there is no disable button.
View 5 RepliesSo this past weekend I upgraded to Windows 10 from 7 and it went very well. I have a USB Microsoft Digital Media Pro Keyboard and IntelliMouse 2.0 wireless mouse, both of which were prompted to install the software suit first thing after Win10 welcome desktop and worked perfectly.
However, I wanted to have a "clean" install, so today I did a PC Reset. Everything went well til the Win10 screen to enter regional info, when my USB KB/Mouse weren't detected/working. I still had an old PS/2 KB/Mouse that worked after a restart.
Here's the problem -
I used these to check my drivers - [URL] .... [URL] .....
and Intel said I didn't need any. I know the ports are good because my USB keyboard and mouse both light up during Intel Bios flash but go blank once
Windows 10 starts up. I'm thinking there was something changed in the registry during the PC Reset that made these controllers incomplete. I also couldn't find anything on
Intel's website to download these drivers either. They tripped these events -
VEN_8086&DEV_27CB&SUBSYS_58428086&REV_013&61aaa01&0&EB
VEN_8086&DEV_27CA&SUBSYS_58428086&REV_013&61aaa01&0&EA
VEN_8086&DEV_27C9&SUBSYS_58428086&REV_013&61aaa01&0&E9
VEN_8086&DEV_27C8&SUBSYS_58428086&REV_013&61aaa01&0&E8
How a clean install is supposed to work better than an upgrade .
Intel D975XBX2
Q6700
Radeon Sapphire 6870 1GB
8GB DDR2-800
Windows 10 Pro
As from today I've got 2 SEE. Both time I was playing PC Game.All started after Win 10 installed updates today. My drivers are up to date ( will check again to be sure ).
View 1 RepliesSomehow unintentionally I created a dynamic disk partition on what was my boot drive but is now intended to be my documents and pictures folder drive.
How do I get rid of the first dynamic partition and change it to a normal partition to store my 'Documents" & "Pictures" folders for the new Win 10 Pro drive C:
Windows (Drive C ) is running fine.
trying to set the default location for Pictures and Documents to the original (C) now drive (D)...want only 2 partitions when fixed - "Documents" and "Pictures"
Every time i try to install some drivers from Windows Update I get the error code 0x80073afc ....
View 3 RepliesSo we're trying to get our first Win10 VM up and running. I downloaded the latest ISo from the Volume License site and installed it on a VM just fine. I ran all Windows Updates as well.
After that I ran Sysprep and choose OOBE, Generalize, and Shutdown. I then copied the VHDX file to a new location for a new VM as we normally do.
That all seemed to work fine until I then attached that hard drive file to a new VM and fired it up. After clicking the through the timezone page I get an error stating:
Windows could not complete the installation. To install Windows on this computer, restart the installation.
I found some info online about changing the minimum password setting to 0 but that did not work. I then fired up my Template machine to see if that would setup fine and that now gets the same error so I'm kind of stuck.
I don't want to have to do manual steps on every VM we create
I'm getting the Reserved Partition error when I try to install Win 10 on my Wn 7 rig.
My SSD is an EVO 500
partitions are
Data 100MB
C: 419GB
Unallocated 46.58GB - this is my Over Provision Partition.
I guess I need need to increase my Data Partition to about 350MB. I want to use Minni Partition Wizard. Should I Reduce the Front End of my C partition? And use that space to grow the Data Partition?
I recently upgraded a Toshiba A300 laptop (2009 model) from Win7 to Win10. I use a 125GB Kingston SSD as primary and a 280GB Hitachi as a secondary internal hard disk, in place of DVD drive, inside a cradle. This is a single OS installation, no dual boot. When I cold boot (from power on) and after the Bios logo, the "MBR Error 1" appears on screen and stops booting. To bypass I do a warm restart (Ctrl+Alt+Del) and the second (warm) boot loads Win 10. Also booting is ok from a Restart. Again error message appears only after a cold boot.
As a teaser I have to mention that, whenever I remove the cradle with the secondary Hitachi hard disk, the error does not appear during cold boot !!!. That is the error message appears only if the second hard disk is installed. This is an annoying situation only and does not affect any other operation, except booting.
I have been trying to upgrade 7pro for a day or so with no luck. First of all I tried the 'get windows 10 app' this tells me a update (KB2952664) is not installed. It was showing as failed in my update long but has since installed ok. However the app still says its missing. So I tried the media creation tool. This starts up fine but about 40 min in this screen appears
I press ok and after about 10 seconds the installer just closes, and that's it we are back to normal. I have tried this 3 times and I get the same result.
I am now getting a new error. The error i am now getting is error C1420127 windows 10 now installs almost but towards the end it stops and says error and then when i go to look at it that is what the error is.
View 9 RepliesYesterday I removed dual booting Linux and after that my Windows 10 won't boot up. I have tried everything. The cmd commands: bootrec /FixMbr; bootrec /FixBoot; bootrec /RebuildBcd; Bcdboot commands and everything. Then I tried Refreshing PC what says: Drive where Windows is installed is locked. Please unlock it.....
Startup repair just scans for a short period and then says: Couldn't fix the problem. I can't Access normal Recovery options, so I'm using a recovery flash drive. I have tried several Live CDs but none of them won't fix the problem. I can access the UEFI Bios, but idk what to change there. I don't want to fresh install Windows, unless it's the only option, because it contains important data.
I was downloading Windows 10 32-bit using the Media Creation Tool to my 16 GB pendrive which is empty. Right when it reached 100% it displayed "Something Happened". I found the temp file which I believe it downloaded, its called BIT52D1.
View 3 RepliesUsing the media creation tool (both usb and ISO) I get an error. Something like "installation has encountered an error during first_boot with sysprep." In not at my toshiba laptop at the moment so the wording may be a little off. Upgrading from my 8.1 current os. I just read about removing my eset antivirus before upgrading so I will remove that and my malwarebytes program as well and try again.
View 2 Replies