How to ungroup and separate removable drives in This PC?
it shows removable drives, optical drives and hard drives in one group together. This is one of the the worst changes made to Windows. Sadly, the OS does not offer you any option to the ungroup drives logically so local drives are in one group and the rest in another.
I've been reading that having fast startup on in windows 8/10 can cause issues with dual booting systems with other operating systems installed like windows 7. I have windows 7 on one ssd and going to have windows 10 on a second. Will i have to disable fast startup in windows 10 or any other type of hibernation settings.
Wondering how Windows 10 deals with putting data on a separate partition or drive. Does it use the same general method as in Windows 7, where it re-maps (for example) "Documents" to a folder on a different letter drive path? So that C:Users{user}Documents becomes G:Users{user}Documents?
I'm hoping that it actually becomes more like *nix, using symbolic links to point to the right place (so C:Users{user}Documents points to the separate partition of drive). Personally, I find the Win7 method to be clunky and problematic in actual use.
I created the USB recovery drive successfully with the option "Back up system files to the recovery drive". Since I needed the USB for another purpose, I transferred the files from the USB to a separate partition on an external HDD and made this drive bootable using YUMI.
So now, on the same laptop, I am able to boot to this new partition on my external HDD where windows recovery environment comes up just fine. I did not want to test the reset or refresh part. Out of curiosity, I clicked on the "System Restore" option on the advanced options screen. I got an error message "To use system restore, you must specify which Windows installation to restore. Restart this computer, select an operating system and then select System Restore"
I have headset Genius HS-500X and it has 2 seperate cables for audio and mic. The problem is that my laptop has only 1 jack with headphones and microphone icon, so it should be a combo jack. About 2 months ago I've bought an splitter [URL] , that has one cable red and one green so it should work. It's the same as in picture. But when I plug everything in correctly microphone is not working and headphones have reversed sound, when sound should come from left side it comes from right. I've tried to reinstall software (realtek) many times, also bought another one splitter, but no success.
I have a Windows 7 PC with 3 DVD drives. Imgburn shows them as connected to 3 different SATA busses: [2:0:0], [3:0:0], and [4:0:0].
After upgrading to Windows 10, all of them ended up on the same bus, [2:0:0], like this:
Why did that change? I tried connecting them on different SATA plugs, but they are always shown on that [2:0:0] bus. The thing is, I really need them to be on different busses, because of a particular requirement of a legacy application I use.
Access is denied on both drives. Just upgraded about an hour ago and I've been looking for solutions but cant seem to find any that works for me. I'm only using one account and its a Local(Administrator) account. How to give full free unhindered access to everything. Since this is my laptop and no one is going to ever use it except for me.
Why my attached drives show twice? I only had this happen on one USB drive before the Windows 10 recent update, but now both external drives are repeated twice! (See attached)
I've had this same issue on 3 computers I've upgraded to Windows 10 (which are the only three I've even needed to have a working disc drive on). Windows 10 will not show the disc drives anywhere. I've checked in the Device Manager and everywhere else I can look, but they don't ever show up. The drives and working and detected by the BIOS but not in Windows. I've already tired adding the popular EnumDevice1 registry value (the whole command is listed below) but it never works.
The registry key CMD command I've tried all 3 times: reg.exe add "HKLMSystemCurrentControlSetServicesatapiController0" /f /v EnumDevice1 /t REG_DWORD /d 0x00000001
So I have set up my SSD and using it for my OS (Win10) and my F drive (1TB HDD) as a drive for my programs and documents, however when I try to search for items vis Windows Start Menu it only shows items for my C drive, how to make it to search both drives for documents/files?
Lately, every flash drive I've bought requires to be NTFS formatted. Quick formatting gives me the option to change allocation size. Is there a specific size I should be using or just go small?
I have several hard drives on my PCs; some are physical, some are partitions. In every PC I've upgraded, W10 marks these as RO. I go through the ritual of setting permissions to Full and marking RW, but occasionally a drive will revert to RO. I can't find a Take Ownership option for drives, only folders. Am I looking in the wrong place?
I usually work with hidden files enabled, and would like to hide empty drives, but it seems my Win 10 Single Language doesn't have this feature, is this normal?
After I upgraded from Windows 7 Pro to Windows 10 Pro everything was fine on my desktop PC. Several days went by as I learned the new OS' interface. Then I got an update message telling me that a reboot was required for the updates to take effect. Blindly I went ahead and rebooted as requested. To my astonishment after I rebooted my two DVD drives were no longer recognized by Windows 10. Mind you, they were working just fine after my initial upgrade from 7 to 10.
I tried using the registry hacks I had seen on so many of these forums. None worked.
My only fix was to do a restore to a date & time previous to the update. (Just go to control panel, select recovery and then select open system restore.
Yesterday I went from Windows 7 to windows 10 with a clean install.
My system based on an ASUS P9x79Pro motherboard has 4 internal disk drives.
The first two, a 500GB SSD for the system and a 2TB spinning disk, are connected to Intel SATA 6G ports and are fine.
I also have two further 2TB data drives attached to the Marvell SATA 6G ports. It is these that are looking unusual.
After installing windows I installed the Marvell driver from the ASUS website for windows 10. However Device manager does not show Marvell under Storage controllers
Both data drives connected to the Marvel controller appear under eject media as removable drives along with something called "Eject Marvell 91xx config"...
One of the data drives (but not the other) appears in File Explorer as a removable drive.
I just upgraded from Windows 7 PRO to Windows 10. I notice that my external USB 3.0 drives can't be found. Before the upgrade it was ok. The only external device that does show is a Sandisk FIT USB 2.0 stick.
When I insert any removable drive (USB, SD cards, etc) the device shows up twice in Explorer. Once under "This PC" tree and the other as a device. See attached pic (USB Drive H):
I remember hearing about this being the way it's designed to work, but frankly it's a bit silly - I only need to see a single entry for the drive/device...
Is there any way to get rid of one of these entries without stuffing up some other Explorer feature?
I've done a reinstall of Windows 10 today. I unplugged my internal storage HDD's to isolate the SSD for the install, wiped the SSD, and reinstalled 10.
Now it's installed, I've plugged my 2 internal HDD's back in, started up Windows, and neither drives are showing. Neither in device manager or in Explorer. What could be the issue here, and how do I resolve it?
I have recently bought a 32gb micro sd card from eBay and was wondering if there is some kind of check I can do to make sure it has correct memory on it, I have heard that some of the sd, hard drives and flash cards from eBay are being faked and what looks like a 500gb hard drive people find out later that its just a 1gb flash drive inside with some kind of modded files in it that makes it look like a 500gb drive, upon transferring files they just delete anything past 1gb.
I did a clean install of Windows 10 and, because of problems with installation,I disconnected all unnecessary DVD drives and expansion cards etc. I decided to reconnect my DVD drives today to two spare ports on the mobo but, when I started the computer I got a black screen with two strange symbols before Windows attempted to start. The computer just hangs on the black screen. I tried disconnecting the drives in turn, different SATA cables and even starting in safe mode but the result is the same - black screen with strange symbols immediately after POST.
What that page is called, but when I want to change save locations, none of my drives show up. It worked before but now it just doesn't want to display anything sadly. Here are a few pictures of what I am talking about.
My drives wont show up in this section either...
The thing is though, they display properly in the "This PC" Section so I know they are plugged in correctly.
In recent weeks, it has become impossible for me to safely remove my external drives. (Mostly, I use Western Digital Passports, Passport Ultras, etc).
I am using Windows 10.
I close all of my programs and folders. I get the "busy" message and to try again later. I run Unlocker on the drives, and Unlocker shows no activity or actions that I can take. I bring up my task manager and nothing is running. I try to safely eject from the WD utility and it doesn't work. I try to eject by going to my computer, right clicking on the drive, and ejecting from there. Sometimes I simply wait for half an hour, read some articles, try again. I get the same "busy" or can't shut down message.
I read online that I could try to Device Manager, click on the drive, and under policies select "Optimize for Performance." However, the computer must restart for changes to take place, and when i've tried, I get stuck on an infinite "Restarting" screen.
I read somewhere that I can try to empty a hidden recycle bin on my external, but I can't seem to reveal it?
Getting ready to move from Win 7-64 to Win 10-64 when 10 is available next month. It's my understanding that Win 10 will not install over Win 7 so I'd like to install a new 250Gb SSD (I currently have Win 7 on a 128Gb SSD as C: ) for a clean install on it. Once all my files & software are transferred I'll keep the current 128Gb SSD as an extra drive.
So, are all SSD Hard Drives created equal? I'm looking at NewEgg & the prices are all over the place. My current SSD is a Cruicial 128Gb which has worked 4 yrs flawlessly.
