I have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
View 6 RepliesWhen I go to disk management and right click on my # 2 HDD to give it a drive letter, it only shows Convert to Dynamic Disk, Properties and Help. change drive letter and paths does not show up ??.
View 1 RepliesI have a situation where I need drives F and G available for scheduled file backups, and I like to play a game which involves mounting an ISO as a virtual drive, which would normally become F. Earlier today, I discovered a way to keep F and G available by creating to small ISOs and putting shortcuts to them in the startup folder. Then at backup time, I can just unmount drives F and G and plug in the flash drives. That seems to work fine, but since it seems a bit awkward to create ISOs just for that purpose, I was wondering whether there might be another way.
View 2 RepliesI have an external drive where the electronics of the case has failed. I have switched the drive into my pc so that I can use it as an internal drive. The drive is still operational but I cannot see it listed in my drives. Opening up disk manager shows the drive is clearly visible there but is no volume letters assigned to it. The easy option would be to delete the partitions and create new. However, the drive is divided into several partitions which I want to keep as they contain a lot of important data files (years of photos for one thing). Disk manager wont allow me to assign any drive letters (option is grayed out) and disk partition only shows me a single partition not the 5 partitions I have on the drive. how do I assign volume letters without losing my data?
View 3 RepliesHow do I automatically mirror files from a hard disk drive to a network folder?
In this case I want to mirror the contents of an entire disk containing photos (no system files) to a shared folder on an OpenMediaVault server running on my home network.
This is separate from the regular backup of the rest of my system which is done with backup software. For the contents of this disk, I don't want them compressed into a backup container file. I want them to be exact duplicates of the original files, kept up to date in that shared network location (login required).
Also, it doesn't matter if they update in real time. Once a day is fine, for example.
I cannot assign a drive letter to a partition. When I right click the partition I only get the word "Help". The partition states as "Healthy (Recovery Partition).
View 9 RepliesStill learning Win 10 ways! I have installed a WD My Book backup drive, and Win 10 gave it the designation of my "G" drive. How do I change from "G" to a different unused letter?
View 3 RepliesAfter the store where I bought my pc from repaired my pc (seems like it was a drivers issue) it came back with disk F (the ssd) renamed to C, so now all my shortcuts on the favourites say this:
It's pretty annoying, I cant call them on a Saturday about the issue. I know they tried booting up with an external disk and that's why it's renamed, but I can't rename it back to F, I've tried it and it gives me an error because the disk is in use I think, I've also tried using MiniTool Partition Wizard Free and the optiong to change disk letter disappears when I click on the one I need changed..
I have a Seagate SATA 500GB HD as a second HD. Windows 10 deletes the letter of the drive every time I reboot/turn off my PC, and I have to reassign the drive letter. Why is this happening and how to fix it?
View 1 RepliesI've installed W10 in my laptop in a dual boot configuration with W7 successfully. I used this tutorial Windows 10 - Dual Boot with Windows 7 or Windows 8 I'm setting up to do the same thing in my desktop and have a couple questions about drive letter designation after doing it. I created a 30G partition on the C drive of my desktop for the W10 install.
My laptop has one drive, the OS "C" drive, I created a another partition for W10, after installing W10 using the USB ISO "boot from USB" instruction when I'm in W10 it shows as the C drive, and the W7 partition is inactive D drive. Just the opposite when I'm in W7, it shows as the active C partition and W10 is the inactive D partition.
On my desktop I have the 120G C drive for W7, a 500G D drive for backups, a fixed CD-ROM E drive, and a virtual CD-ROM F drive. I've made a 30G partition on the C drive to install W10 on for the dual boot. The question is when the auto backup runs (I have it backup & image every Sunday at 7:00pm) it backs up the C drive to the D drive. Will the W10 dual boot install change my backup drive letter to something other than D, or will the non OS physical drives keep the same drive letter? I will have to remember to be in W7 for it to be the C drive when it backs up, but my concern was if the dual boot was going to change my backup drive to something other than D. That would affect the backup.
I've attached disk mgmt. below, FYI the G drive is the USB with the W10 ISO
When I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 RepliesIn my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
I upgraded from W8.1 to W10. After the upgrade my mirrored volume was 'gone' (created with disk management). Fortunately I was able to restore the data on one of the disks.
I cannot manage to recreate a mirror on Windows 10. I tried using disk management as well as Storage Spaces but I get errors when the formatting begins.
Even with new disks, all the same it does not seem to work. I can not figure out why...
I get: Cannot remove Storage Space (huh.. remove?? I am creating one!!).... Parameter is wrong: 0x00000057.
Could there be some history of the previous mirrored drive which is preventing me from creating a new one or should I just do a clean Windows 10 installation?
Preparing upgrade to 10
Did clean install Window 7 to customize, sysprep, image, install on several duplicate PCs prior to upgrade
1st drive is SSD, 2nd is HDD
SSD partition c: os and d: virtual box
HDD e: data
wrote answer file move user and program data from c: to e:
Something happened post sysprep and partition letters switched d and e, I changed the drive letters in windows and now can't get into profile There is a shortcut to e on the d partition of SSD Tried reassigning letters using diskpart but they don't remain when entering windows but go back to the wrong assignment.
I googled this and apparently it happens but I don't know why. I can only think that I was lucky to image the clean OS however if I can fix this it would save me time. If not, I will get rid of the d: partition and put that post sysprep
Here is the answer file
< ?xml version="1.0" encoding="utf-8"?>
< unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
[code]...
I can't seem to fix this problem
I am the only user of my pc, and I am the administrator etc but the user name shown in the C drive is John and I want to change that to Pete.
I have drives C and F
In C the user is called John
In F user called Pete
Start/File Explorer/This pc/Local Disc (C/Users/John
Start/File Explorer/This pc/Local Disc (F/Users/Pete
Can you change the drive icons in Win 10? I did this in Win 8.1.
In regedit -HKEY_LOCAL_MACHINESOFTWAREMICROSOFTWINDOWSCURENTVERSIONEXPLORER
It won't let me type DriveIcons.
I currently have an ASUS motherboard (p9x79 Pro) and am running my operating system on a spinning drive and using the ASUS cache which uses a 128GB SSD drive to cache the operating system disk.I would like to dump that arrangement and run the operating system on a larger SSD drive (they are cheaper now). Ideally I would do this at the same time as moving to Windows 10 so that I only have to install once.
My question is - if I go for a clean install to Windows 10 can I put this directly onto a new clean SSD drive - using my old windows 7 key to activate it (it was an OEM key I bought when I built the system) or will I need to clone the Windows 7 system onto the new drive before installing?The motherboard will not be changed.
I'm sitting on my windows 7 here, ready to upgrade to windows 10 with the "Get Windows" app.
One complication though is that I'm running on an old harddrive. One of those simple SATA disks.
I got my hands on a new SSD disk which I would prefer to have windows on.
So, How could I in the simplest way get windows 10 and have it installed on my new SSD?
Should I upgrade to windows 10 to begin with?
Almost all of the data I care about is on my other internal drives. Should I bother backing up my other drives, or does upgrading them leave them alone?
View 1 RepliesI have two physical disks in my notebook, one simple partition each, BitLocker encrypted. Drive C:, which is my system drive and drive D:, for some media stuff.Windows Version is Windows 10.0.10586 x64.I have configured VSS to use the "Previous Versions" feature in case I accidentally delete or overwrite a file. I did this on my Win7 install to and it saved my butt at least three times.
VSS is running (Volume Shadow Copy Service set to "Manual"), snapshots are there but when I right-click on a modified file (or on the root of the disk) and click "Previous Versions", my D: drive correctly displays the existing snapshots, on my system drive C: there is always a "There are no previous versions available" message. But, when I click the "System Restore..." button, I get a list with my snapshots, so I guess I could restore my system.
configuration seems to be ok and the two manual snapshots are there on both drives. For the moment there is no system restore point, but it does not work with snaps created by them either.
C:WINDOWSsystem32>vssadmin List ShadowStorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.
Shadow Copy Storage association
For volume: (D:)?Volume{46482e7e-0000-0000-0000-100000000000}
[code]....
I am trying to set up our server which we have on my sisters new laptop. when I go to 'map network drive' and click 'browse' the server called 'BGE-B-NAS' doesn't appear on the list. I have tried multiple times and nothing seems to be working. I also tried to type it in manually but it just said that 'windows cannot access BGE-B-NASCompanydata'. Is it to do with the fact that this is a laptop and it is using the wifi instead of being wired?
View 1 RepliesI currently have a PC that is running Windows 8.1. I have a 120GB SSD as the primary drive ( C: ) with the OS and a few programs installed on it. I also have a 750GB HDD ( D: ) installed in the computer. Over the past year and a half, I've installed some programs to the SSD and some to a folder on the HDD. I plan on updating this computer to Windows 10. To do that though, I was planning on wiping the SSD and doing a fresh install to it and just reinstalling any programs. My question is if there will be any issues regarding the programs installed on the HDD. I'm guessing some of them probably still have certain files installed on the SSD and that wiping it will mess up those programs.
I'm also wondering what a good way of installing programs to a secondary drive is for the future. I'd like to install some programs to the secondary drive without worrying about certain files still existing on the SSD while still being able to install some programs to the SSD itself. This way if updating in the future, I wouldn't have to worry about this issue. Let me know if this makes sense and if I need to clarify something.
I just bought a new 850 EVO and i am trying to make a clean install of windows 10 pro through my optical drive, not a usb drive. I turned bios to AHCI and everything seems fine. At least everything worked fine with windows 7. So the problem is that after the installation asked me for first time to restart my pc and i removed the DVD, then bios showed me that there is no Hard drive in my system, after making the AHCI checks.
View 1 Replies