Drivers/Hardware :: How To Initialize External HDD
Sep 2, 2015
Since I put vmWare 10 on my laptop , my external HDD wont initialize. it says its there but when i try to initialize it tells me my drive is too small for GPT, Its 500gb. When I installed VMWare i might have had the external connected and i believe i opted for to split partitions into 8 parts. I have some data and files on the drive that i need but once i take them off i will just format it. So how can i initialize the drive and/or get my data and store it some where safe? I am running windows 10 BTW
View 1 Replies
Similar Messages:
Jan 3, 2016
What I mean is that specifically, my T, Y, Shift, Tab keys take 15 to 20 minutes to register. Before then, I physically have to push down hard on the key to make it work. I tried with a different keyboard. Same problem. That narrows down my issue to a software or internal hardware issue. I am asking this now because my parents have to get work done on the computer and want to use the keyboard completely right after the computer starts up. Is there anything I can do to diagnose the problem?
View 7 Replies
Oct 19, 2015
My toshiba 1tb external hard drive currently says it is a raw file system and i cant seem to format it no matter what i do. I dont care for what is inside (only one word file) but i just want to be able to use it again. Is there anyway i can format the HDD and make it usable again?
View 3 Replies
Dec 21, 2015
In the past few days my external hard drive makes the sound (windows notification) like when I unplug it from my desktop. Then about 5 seconds later I get another sound and notification asking me how I would like to view content for G: (my external hard drive). I only have it attached to use for backups and I've checked my back up program (easeus) and my backups haven't been happening either. I used crystaldisk to check it and it's healthy. Why it would be essentially shutting itself off and on?
View 9 Replies
Jan 20, 2016
File explorer is struggling with my 2 external WD My Book 3TB HDD
Problems: 1 of the drives will keep running randomly all night (and gets real hot) after PC shut down. When trying to write a batch to one of the drives explorer keeps trying to access the drive, cannot open it and becomes unresponsive (task bar icons disappear).
View 2 Replies
Feb 1, 2016
External usb sticks or drives list twice in the file-manager.
Tried the advice in this text. It lasted only until my last update. Then it was back to dual entries again.
Would like a permanent solution. Maybe a .reg?
View 4 Replies
Sep 10, 2015
Need to undertake the above for my daughter's college course. Haven't a clue where to start and I am not particularly technical (understatement). Have found a lot stuff here about merits of FAT and exFat, but just need a working how to. Video will be involved at full 1080p so I suspect that the 4gb limit will be a hindrance (assuming 3 minutes per gb).
View 4 Replies
Sep 30, 2015
I recently bought a new PC with win 10 on board. I now find that I want to retrieve some data from my old PC which is unserviceable.
I purchased a 22 pin sata to usb cable. When plugged in I find the Device manager will not find this new drive. The led's on the cable light up but the drive is not running.
The old HDD is a 3.5" unit which ran on win 7. the old drive is a Samsung HD502HJ/b (part No.) and is in working condition.
I am wondering if it requires a driver of its own? Or something a more diverse problem like a usb 2.0 or 3.0 conflict, maybe.
View 9 Replies
Aug 17, 2015
I just upgraded from Windows 7 PRO to Windows 10. I notice that my external USB 3.0 drives can't be found. Before the upgrade it was ok. The only external device that does show is a Sandisk FIT USB 2.0 stick.
View 9 Replies
Jan 18, 2016
I've begun to get this pop up, about once a day, saying "Failed it initialize SdAppServices." No other information is available in the box. It happens at random times; has nothing to do with anything that I am doing at the time. Recently, it popped up when I was browsing online.
View 5 Replies
Sep 26, 2015
When I plug my external into my pc it tells me it's unable to use and to format the drive. So I try to do so, and Windows tells me that there's a program using the external drive.I attempt to format anyway since I know there's no programs using the drive, and after a minute the formatting comes to a stop and I get a message saying it's unable to format. I've tried formatting it via 'This PC' and DIsk Management in Windows 10. Tried Quick Format as well and nothing is progressing.
View 9 Replies
Nov 20, 2015
I actually have two issues (the second being that the built-in microphone isn't working, but that's the least of my worries). I have my laptop connected to an external monitor & I can't get any non-system sounds to play.
Dell Laptop w/ only HDMI video connected to Dell VGA monitor (no speakers) via an adapter that has a 3.5mm jack for speakers. I can get system sounds via the laptop's speakers, but I can't play MP3s and YouTube videos have no sound. I had things working at one point (no, I cannot remember what I did or can find the tutorial that I used), but after moving my desk (unhooking the laptop from the monitor), cussing at non-functional microphone, and setting things back up, I'm back to no sounds. When I did get the speakers to work, they were working on the 3.5mm headphone/microphone jack on the laptop, but not through the jack on the HDMI/VGA adapter.
I've seen things about disabling the HDMI audio controller. I cannot change the default audio devices via the sound dialog box that is available by right-clicking on the sound icon on the bottom right of the screen. I'm assuming that the Dell speakers that are stuck as default are the on-board ones on the laptop.
View 1 Replies
Nov 17, 2015
I noticed I have a corrupted directory on my external drive and whenever I use FreeFileSync to backup my data, it flags it:
How to delete this unwanted directory? Every time I try to delete it, I get this:
View 2 Replies
Jan 14, 2016
I have an external hard drive that I have used regularly with a Windows 7 machine via esata
that does not show up when plugged into my Windows 10 notebook via USB.
I can see it under the disk management, but there is no drive letter assigned so I cannot access it.
View 4 Replies
Feb 10, 2016
I purchased a 1TB hard drive to place media files on it so that I could plug it into my DVD player which has a USB port. I made sure to format the hard drive to Fat32. What I can surmise is that the 1TB hard drive is too big for the DVD player to read. I plug it in and it says Device Not Supported. But I've successfully plugged in an external card reader and used a 16GB SD card to place files on and it reads them fine. So I'm thinking it's the size of the drive that is the issue.
I might have to partition the hard drive into two partitions. One partition 16gb and then the other partition with whatever is left. They did say they were not sure if there was a way to set it up so the 16gb Partition is what is recognized first when plugged into the DVD player. This way I would transfer movies I want to watch to the 16 GB partition, and transfer them over.
Now when I search hard disk partitions in Windows 10 the manager comes up and I can see the hard drive, but I can not change the size to partition it. It's grayed out. Is there a freeware program that works with Windows 10 that will split the hard drive into two partitions in sizes I specify, and make sure that the 16GB partition is the first one loaded or seen? And if I set it up that way when I plug it into my computer will the computer see both partitions?
View 8 Replies
Jun 5, 2015
In recent weeks, it has become impossible for me to safely remove my external drives. (Mostly, I use Western Digital Passports, Passport Ultras, etc).
I am using Windows 10.
I close all of my programs and folders. I get the "busy" message and to try again later. I run Unlocker on the drives, and Unlocker shows no activity or actions that I can take. I bring up my task manager and nothing is running. I try to safely eject from the WD utility and it doesn't work. I try to eject by going to my computer, right clicking on the drive, and ejecting from there. Sometimes I simply wait for half an hour, read some articles, try again. I get the same "busy" or can't shut down message.
I read online that I could try to Device Manager, click on the drive, and under policies select "Optimize for Performance." However, the computer must restart for changes to take place, and when i've tried, I get stuck on an infinite "Restarting" screen.
I read somewhere that I can try to empty a hidden recycle bin on my external, but I can't seem to reveal it?
View 9 Replies
Feb 10, 2016
I'm trying to change the name of my External Hard Drive as it appears as Local Disk G on my laptop. However, upon trying multiple times it keeps on coming back as Local Disk G.
View 9 Replies
Feb 10, 2016
I have an external hard drive and when i try to open it, it says access denied.. when i try to see the ownership, it says unable to determine owner.
When i try to change the ownership through various methods like cmd prompt take own or by going to the properties of the drive, it says unable to set new owner, access is denied...
View 2 Replies
Dec 17, 2015
I have a Toshiba 2TB Canvio USB 3.0 Desktop Hard Drive, it was working yesterday but I am now having problems with accessing it today. I connected it today and in my computer it shows up as Local Disk (G:), when I click onto it to try and access it file explorer crashes and only sorts itself out when the drive is unplugged. I tried uninstalling the driving and had no luck with it, can't access anything that involves the hard drive to format it either...
View 4 Replies
Feb 10, 2016
My external hard drive is showing an error.
G: is not accessible.
The disk structure is corrupted and unreadable.
How to fix it without formatting it? Have a lot of file on there that I'd like to recover if possible.
View 6 Replies
Oct 24, 2015
I have a Seagate FreeAgent GoFlex Desk 2TB USB 3.0 external hard drive that I use to store (majority) videos and documents. A few days ago it started giving me this error for every folder and file, and eventually just from trying to access the hard drive itself from This PC:
And this is what shows up in Device Manager:
In Disk Management, this is what shows up at first (first image) and then when I refresh Disk Management through Action > Refresh (second image):
As for specifications wise, I clean installed to Windows 10 Pro N x64 (a day after this error came up when I plugged in the hard drive, actually... Not sure what I was thinking at the time) with what I think are updated drivers for my hardware from the manufacturer's websites. Previously, it was a clean installation of Windows 10 Pro x64 after upgrading from Windows 8.1 Pro x64.
Not sure if this is worth mentioning, but, all my folders and files show up when the computer actually can read the hard drive, I just can't open any of them. I've never had to deal with hardware problems before. I really don't want to lose the files in that hard drive, as I'm not able to make a backup even if it was working (with it being my biggest external to date).
This is what the hard drive shows on Speccy at a glance:
(Is the serial number and firmware version supposed to be the same on all hard drives? )
View 9 Replies
Dec 22, 2015
My HP Pavilion all-in-one computer does not recognize my Seagate external hard drive after I installed Windows 10. Everything worked well with the Windows 8 but neither system will recognize the other once I upgraded to Windows 10.
View 2 Replies
Dec 12, 2015
Early on in the Windows 10 update process, I was able to upgrade an HP Stream 7 and a Stream 11 to Windows 10. Both had the same 32GB RAM and nominal 32GB eMMC as the Stream 14 I am wrestling with. Both came to a point where they told me the device had insufficient space on its C: drive. In both instances I selected an external Micro SD drive, and off it went with the upgrade.
In this instance I cannot get past that point. I select the external drive (a 320GB external USB spinner) but it doesn't accept that or any other external device I offer it.
When I click "Refresh" it says that it needs 10GB on C: drive, and eventually says that the upgrade failed.
The computer has been wiped, and reset to factory spec for W8.1 with all updates installed. It has ~20GB on C, and 7GB in another partition, so even if I find a way to remove the partition it wont be enough.
I'm about to have to give up on this thing and just make the poor user run with W8.1 until further notice, how to get past this point.
View 1 Replies
Nov 13, 2015
First error in a program after the Windows 10 Fall Upgrade..I'm using Adobe After Effects CC 2015.
View 1 Replies
May 2, 2015
I'm running B10074 on my laptop , and I connected my external display to it as well as my external keyboard and mouse at my desk so I could sit there and do the setup etc without moving all of that out of the way. I had the laptop lid shut and off to the side while I was doing this. Then, I shut the laptop down, unplugged all the external peripherals, and turned it on again. It went through the windows boot sequence with the spinning circles, then black screen.
After 20 minutes of frustration, I realised that the laptop would show a login prompt only when I plug in the external monitor BEFORE i start it, and only if the laptop is closed while it is booting (when the lid is closed during boot, the Dell logo and spinning circles come up on the external display)
I further figured out that in Control Panel, it only displays the external display, its like the computer doesn't even recognise the internal display anymore. I dont know why that would be since when I first booted it up and installed drivers, I was using the internal display and everything was working fine.
View 9 Replies
Jan 29, 2016
I'm running Windows 10 Pro, Build 10586.71. Why I have my external hard drives showing twice in File Explorer (see Attachment) ...
I've had this since the first install of Win 10 ...
View 1 Replies
