Drivers/Hardware :: How To Install A New Driver Downloaded From Microsoft Update Catalog
Aug 15, 2015
As I encounter problems with my Lan driver Realtek and Windows 10 Pro 64, somone on the forum said me to download the last version from Microsoft update catalog which seems the good one.
So I downloaded the driver but it is a .cab file. When I unpacked the files I obtain four files : a .cat file, a .inf file, a .sys file and a .DLL file. There is no setup.exe file....
I tried to install the driver using the command "HDWWIZ". It sees the .inf file but noting installs..
View 6 Replies
Similar Messages:
Nov 10, 2015
Recently I was notified that a driver installation failed. I went and checked it out, and it was a driver for HD 4600 graphics. My old system ran an i7-4790K, and when I upgraded to X99 I did not reimage my SSD.
Is there a way I can remove an update from Windows Update? The CPU I have has no iGPU, let alone HD 4600.
View 1 Replies
Oct 15, 2015
I installed Win 10 Home Single Language from the downloaded iso. How do I update this thing?
View 3 Replies
Sep 5, 2015
my hp photosmart 5520 e-All-in-one printer will no longer print after I downloaded and install windows 10. What should do.
View 1 Replies
Jan 24, 2016
New build. From a fresh install of windows 10 i try to install the drver for my IGPU Intel HD 530. each time i do that i get a BSOD with this message:
VIDEO_TDR_FAILURE igdkmd64.sys
Or sometimes it's
SYSTEM_THREAD_EXEPTION_NOT_HANDELED igdkmd64.sys
I've tried drivers from motherboard manufacturer CD, website and intel and some autodetect driver software. I always get the same behavior:
The screen start blinking several time ( black screen) before showing the BSOD then reboot and repeat it self. Even the driver downloaded by windows update have the same impact.
I've managed to install it in safe mode but when i restart in normal mode i get the same behavior.
I've tried 2 different monitors, VGA and HDMI , tried with UEFI on/off => same result.
I've tweaked once the tdr delay to 8 second, but didn't work.
CPU: Intel I7-6700KMotherboard: ASUS Z170 PRO GAMING
RAM: HyperX FURY HX421C14FBK2/16 - 16Go Kit (2x 8Go) 2133MHz DDR4 Non-ECC CL14 DIMM
SSD: Samsung EVO 850 MZ-75E250B/EU 250 GB
with 80 PLUS 550W power supply.
OS: WINDOWS 10 FRENCH HOME X20-25432
View 6 Replies
Aug 21, 2015
I checked my available updates this morning to find that Windows 10 has downloaded and wants to install the "latest" video driver for my Radeon 7700.
I have used AMD Auto Detect and it tells me I have the latest driver (15.7.1)
I have used the instructions on this web site to disable automatic driver updates.
what is this driver? I have read before that Microsoft sometimes tries to download and install drivers that have already been installed or are already up-to-date.
View 1 Replies
Dec 13, 2015
How do I remove the dialog box telling me to update drivers ? I have automated updates from HP so I do not require a new program that wants to install on my computer. I'm confused as to whether it's from MicroSoft or some scam.
View 2 Replies
Jan 1, 2016
I recently replaced my GTX 660 with a GTX 970, and after I had completed installing that, the PC started up perfectly. The only issue was the internet said it was not connected (with a red X on the connection icon). I used the troubleshooter to discover that I did not have a LAN driver installed and windows didn't couldn't detect what I needed. I check my files and the driver was still there, so I uninstalled it expecting the disk that had come with the box of the motherboard to reinstall the driver correctly. After I had uninstalled the driver and used the disk to try and reinstall, the driver did not reappear. I searched for a driver install separately on my laptop, but to no avail. Nothing seemed to be compatible with my motherboard. The driver which I had assumed matched state that it could not detect the family of driver on my PC. I tried to do a recovery but didn't have a backup file, and resorted to a factory reset. After trying the disk after the reset, and continuing to search for the right driver, I came up empty handed.
View 9 Replies
Sep 9, 2015
I need finding the folder for the games I downloaded from the Microsoft Store in Windows 10. It gets annoying finding games through the search tool and having them pinned to my taskbar would also be inconvenient. I would rather they were in a folder.
View 1 Replies
Aug 3, 2015
I just updated my laptop to Windows 10 and I'm having an issue with the driver for my fingerprint reader. Windows 10 keeps installing the latest driver software for it rather then the version that I manually installed. The problem with the newest driver is that it disables finger print sign in and windows hello. I had the same issue in Windows 8 but I was able to just go into Windows Update and disable the update, with Windows 10 I can't do that.
View 3 Replies
Mar 31, 2015
Been reading here and using win 10 from the outset. On latest build, updated this morning. This Elan touchpad driver keeps coming in through windows update and it just screws up my touchpad more than anything. When it loads up I can no longer use right or left click functions on the touchpad. I can find no way to stop the update.
Is there any method for stopping a particular windows update from loading? I keep uninstalling it but it comes back all the time. I am on an Asus G750J laptop.
View 9 Replies
Oct 14, 2015
i've updated to windows 10 on my pc and i'm unable to download the driver for my epson sx235w printer to my pc. i've tried the install disc and also via the drivers online. each time it starts to download the drivers it gets stuck on the download part with the spinning wheel for at least 30mins.
the printer was working perfectly on windows 8 via a usb cable, but since going to windows 10 the printer isnt recognised and the drivers wont install.
View 9 Replies
Jan 22, 2016
My drivers failed to install correctly, my computer black-screened during the install of them when I was using Driver Booster. Now my PC isn't detecting my second HDD. It is in BIOS, but not in Device Manager. It is not showing up in all utilities, even if I show hidden ones. The stupid program didn't create a backup and I can't tell for sure what drivers it has broken.
I think some were Human Interface Devices, Universal Serial Bus Controllers, some SATA controllers and some others, can't tell. It also isn't showing up where you format and partition drives, windows just straight up can't detect that it is connected. I have tried Windows Repair, didn't work. I can't find any info, I don't have a way to roll-back. Will resetting my PC even work? Now I can't access my main drive, how can I reset these basic drivers without being able to rollback? I have seen some mention of uninstalling drivers such as...
"I had similar problem with my added disk drive when I upgraded. I had to go to device manager IDE ATA/ATAPI controllers and delete all ATA channels, back out and restart. Let Windows find all ATA devices and there were both my disk drives.."
But I am not certain whether it is safe to uninstall that driver or others. All my files are on that drive. My PC now cant detect my on-board SSD too and it cannot detect my CD-ROM too. Would resetting my BIOS reset the those base drivers?
View 1 Replies
Nov 21, 2015
I have a notebook with nVidia 860m video card. There is GeForce Experience preinstalled and it recommends to update driver. Problem is: Win 10 does not recognize 860m after rebooting my system when I install nVidia's fresh drivers. I don't understand that sort of problem because I always updated drivers on win 8.1 without any problem, win 10 is updated regularly. So if I am interested to install recommended updates, is there a way to understand will it work or not after reboot without actual install? I tried to installed drives via devices manager, it is installed without any problems but does not work after reboot.
View 9 Replies
Aug 5, 2015
I did a clean install of Windows 10 on my Lenovo Miix 2 8 tablet. Everything went fine. But, I wasn't able to install the driver for the internal GPS. It's a Broadcom BCM4752. The installation of all drivers I found (including Lenovo) ended with the message: "An upgrade was needed. Please reboot your system and restart the installer." Which I did - but, it didn't work!
Installing the driver under Windows 8.1 and upgrading to Windows 10 worked without problems!
View 2 Replies
Oct 16, 2015
I have a SteelSeries Sensei mouse and a Razer BlackWidow keyboard. Windows 10 daily attempts to install a "SteelSeries ApS - Keyboard - SteelSeries Sensei [RAW]" update. The update fails within seconds of starting with error 0x80240016. The initial failure message darkens my screen (even when another program is full-screened) and shows a simple message, I don't currently have the verbiage and can't reproduce until Windows attempts automatically.
The update says keyboard in the name, but also says my mouse model. I'm sure it probably pertains to my mouse, but my mouse is working fine and this update fails regardless.
I've rebooted. I've attempted to install while a different mouse was plugged in. I've tried updating mouse and keyboard drivers automatically through the Device Manager ("device driver is already up to date"). I've installed keyboard and mouse drivers from the vendor sites.
Is there anyway to get Windows 10 to forget about this update and stop trying to install it?
View 1 Replies
Jan 21, 2016
I have installed intel's driver detection tool and it informed me that I have a custom driver installed by the manufacturer. Acer site scanned my pc and found new driver VGA 10.18.15.4248, which i downloaded but upon installation tells me is the wrong driver for my pc. I have upgraded(haha) from win8.1 to 10, not sure if this is part of the problem. This driver was released 7/15. I ran windows driver updater and it tells me the driver I have, the only one btw, is current. I have tried to contact both Acer and Intel and get no answers.
View 5 Replies
Jul 30, 2015
On Windows 8. 1, I had no issues with this speaker. It's a JBL Charge. After upgrading to 10 it worked fine until a reboot when it failed to connect (it pairs, but won't connect, and the speaker doesn't appear as an audio-out option in Sound settings).
The Bluetooth wizard in PC Settings says "Driver error" next to the speaker icon.
Poking around in device manager, I see this error:
"This device cannot start. (Code 10)
{Conflicting Address Range}
The specified address range conflicts with the address space."
The only references I find to this error online are for different (and quite old) version of windows, and seem unrelated to Bluetooth.
I can't even look at the "resources" tab because it appears to have vanished in Windows 10!
View 3 Replies
Nov 12, 2015
After downloading the Windows 10 file (which took over 5 hours) the file would not install. I will try to do a download again and see what kind of error message we are getting.
View 2 Replies
Dec 11, 2015
What files can I delete after installing the new Win 10 Updates?
I'm running a Dell Inspiron 14 3000 series with 32G eMMC.
View 1 Replies
Jul 29, 2015
I'm planning to go from windows 8 to windows 10 after getting my first build, and I'm curious if I need to update my drivers before getting windows 10 or not. I know you put in the OS disc before any driver discs that came with your hardware so I don't know if I can just do a clean install of windows 10 and then get my drivers or not.
View 1 Replies
Jul 28, 2015
My PC has downloaded all of the Windows 10 installation files in the $Windows.~BT folder, but I have not had any installation notices. How to initiate the installation?
I've read not to click the setup application in the $Windows.~BT folder as this will apparently make the files disappear.
View 4 Replies
Aug 1, 2015
I triggered the manual update through the command line. Win 10 downloaded and failed at 99%. I got this error Code 80240020. How to fix it?
View 1 Replies
Oct 12, 2015
Every time i try to install some drivers from Windows Update I get the error code 0x80073afc ....
View 3 Replies
Sep 26, 2015
I'm having quite a bit of trouble removing the generic bluetooth drivers that Windows installs for you. Those have to be gone if I want to install Toshiba Bluetooth Stacks, which I need in order to use my Wii U Pro Controller in my computer. I've gone through a few methods to try this out and all have failed.
I started out by simply uninstalling the drivers on the device manager (or whatever it is called in English). Didn't work, as the drivers were back when I had to plug in my dongle to complete the installation for TBS. When I tried this in Windows 7, it worked flawlessly, yet in Windows 10 this method did not work.
Afterwards, I tried deactivating the forced driver signature, as well as make it so Windows Update doesn't automatically download any drivers it finds suitable. On top of this, I traveled into the INF folder of my Windows folder to do steps that Microsoft recommended: rename bth.inf to bth.inf.old and bth.pnf to bth.pnf.old. With all this, it should in theory work right? Nope, it didn't. Not even after a reset.
My last attempt involved unplugging my PC from the Internet as a first step, followed by everything else listed above and then a reset. The drivers were still back, bth.inf and bth.pnf somehow magically appearing in my Windows folder when I have no Internet access. I'm at a loss as to what I'm supposed to do.
View 4 Replies
Aug 4, 2015
A new touchpad driver keeps installing, which then causes the touchpad to stop working until I plug in an external mouse and roll back the driver!Is there a way to block/ not install a certain update?
View 4 Replies
