Most often I face this problem with my USB drive like Pendrive, Portable Harddisk, SDMMC Card etc which are not in use anywhere and does not show in Task Manager but still you cannot eject it out or get the message "safe to remove". If this situation arise how to overcome and eject the USB out safely without corrupting your contents in the USB Drives.
View 5 Replies
The service cannot accept con messages at this time.
View 3 Repliesi have my ASUS X555LD for almost a year now, so as far as date is concerned my laptop shouldn't be too old to suffer such illness. So it came with Win8.1 x64 of course and just recently, as soon as Windows 10 was released, i upgraded quickly.
but right after i upgraded to Windows 10, my laptop became ill and had this errors:
1. i got BSoD Most of the Time, one would say CRITICAL_PROCESS_DIED or UNEXPECTED_STORE_EXCEPTION. there are times my laptop would freeze in the BSoD, not even the 0% would move to 100%. so i had no other choice but to force shutdown it, and sometimes after turning my laptop on again i end up at my BIOS with no HDD nor BOOT ENTRY listed. as i experimented, i had to press slightly hard on the right side of my Laptop where my HDD is Located just for my Laptop to re-read my HDD once again, as soon as i got back to Windows 10, i ran an HDD Check and nothing was wrong, no bad sectors or anything. this is confusing me as to how it is happening. so i somehow got used to BSoD since my Laptop frequently experience it. sometimes just a simple movement that would shake my laptop would turn into BSoD again, i suspect something like my HDD or loose or the likes. i dont really know.
2. after the BSoD Case, a week or three i guess. i started to loose Audio Ability. it was just this morning, the Volume Icon has a "RED X" on its icon and states "No Audio Output Device is installed.". and after checking my Device Manager, to my surprise the Built-in Audio Device (Realtek) is not there. i don't know how or why it happened but i can't get it back.
even checking the sound tab on the control panel doesn't bring out Audio Devices.
i was wondering if ASUS or the PC Store where i bought my Laptop would fix it for me as per warranty is involved ?
I recently put my camera memory card into my computer to download photos. I couldn't open them and need to leave so hit "remove device" figuring that I'd go back later when I had more time to get them. When I went back and reinserted the card it didn't show up. I've tried to "add a device" but it still doesn't work. When I hit the device and printers icon it doesn't show up. What do I do?
View 4 RepliesUpgraded old laptop (HP Pavilion dv2225) to WinX and everything works except for sound. Device Manger (Win key+ X) shows no missing drivers for sound. Used to play AoK under Win 7.
View 2 RepliesIt used to be possible to do this in Device Manager IIRC, but with Windows 10 installed I can't see how to get a device driver report. Has this been taken away? If so what will produce such a report?
View 3 RepliesI very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I can't even search for new updates any more!
I have just done a Clean Install of Windows 10 on my Sony Vaio VGN-NW21ZF laptop following a partition corruption while trying to repartition the HDD. previously it had been upgraded to Windows 10 from Windows 7 and there were no device driver issues.
All appears to be working OK, but in device manager I have two unknown devices that do not have drivers installed. On is described as Base System Device, and the other as Unknown Device. Looking at Sysyinfo I see the following details:
How do I work out what these devices are so I can try to find the correct drivers?
Looking in Computer Management I see this information
Over the past few weeks I've been trying various Alfa Wi-Fi adaptors, and different drivers. I've now given up and bought a device (TP-Link) that has a driver built into Windows 10.
However, when I plugged it in it seems to have picked up on an Alfa driver, possibly as the chipset is similar.
Is there a way to purge all drivers for a device type, except the Microsoft ones?
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
The normal uninstall of old drivers in Device Manager isn't working. I am trying to update my Intel 7260AC Wi-Fi adapter to the latest Windows 10 drivers (18.12 from Intel's website). They won't install. The .exe runs but the drivers don't change and the new drivers aren't even listed in device manager to select. I can only select between two older driver versions that were once used under Win 8.1 (I upgraded).
When I try to uninstall the device, the check box to uninstall software isn't available. The device will uninstall but simply comes back with one of those two drivers. Is there another way to permanently remove them (e.g. where does Windows store driver software including registry entries). I would like to simply get rid of anything and try to get 18.12 drivers to install...I'm thinking they are somehow conflicting and preventing the install.
I have googled this all over the place and there are all sorts of issues with DVD / CD-ROM players no longer being recognized but I haven't come across the same problem I'm having.
I upgraded to Windows 10 64bit from Windows 7 64bit. One day while I was transferring data from my SSD boot drive to my HDD storage drive everything locked up, I got an error message (that I didn't save) and all of a sudden my HDD was no longer visible in My Computer. I ran into all sorts of issues following this and believed that something had corrupted during the data transfer so I opted to disconnect my HDD and do a fresh install of windows with a format on my SSD.
Everything was working well until one day the same thing happened with my DVD/CR-ROM drive, it just disappeared from My Computer. I went to install / check for updated drivers in Device Manager and I believe I clicked uninstall by mistake.
Now when I look at Device Manager there is not even a DVD/CD-ROM option (menu spot for it).
Above: So here you can see My Computer, there is my SSD Boot drive but the DVD / CD-ROM is not there
Above: The DVD / CD-ROM drive does not show up in Disk Management, I've tried rescanning drives, refresh, nothing. (As an aside, what are those unnamed disks???)
Above: Device Manger, there is not even an option to view DVD / CD-ROM drives.
Above: Regedit - A fix I saw was to check this registry for UpperFilters and LowerFilters both of which were not there so I didn't touch anything here.
So far I have done the following troubleshooting:
Turned off the PC and unplugged the CD/DVD drive from the Sata Port. Restarted the PC and loaded windows. Shut off the PC again and re-connected the CD/DVD drive.
When I started the PC back up I entered BIOS and the drive shows up under Sata Port 2 like it should:
ASUS DVD RAM GH75N
There is power to the drive, it opens and closes and if I put a disk in it spins up.
So this leads me to believe the drive is ok and the cable / port are good as it's being recognized.
I think my biggest concern is not being able to see a menu in Device Manager for DVD/CD-ROM drives. I'm not sure how it got removed or how to get it back.
I'm going to try and contact ASUS to see if they have specific drivers for this drive meant for Windows 10.
For some reason I can't run the Device Manager. After a couple of minutes I get a "did not respond in a timely fashion" message ...
The PC otherwise runs fine.
Upgrade from win 7 pro 64 to 10 pro 64. All hardware and software was new, name brand and authorized at time of original build. The bios shows the drive as sata 3. I checked the windows advisor and the drive is rated as acceptable. It's an Asus sata dvd-+rw.I used every windows repair and diagnostic tool I could find to no avail. The only update for the dvd player was firmware which I installed. I tried switching the bios to auto play but it did nothing.
I did have problems with the upgrade. I could not get the upgrade icon although I had all the required files and had auto upgrades set, so I downloaded 10 to a dvd and did the upgrade. That's the last time the dvd player was recognized. It is working. Asus loads a mini os on it's mother boards called Speed Gate. I can use Speed Gate to to read file on a dvd but it wont execute.I tried making a recovery usb but it fails. I then tried reset but it disconnects the key board and mouse so I have to do a hard restart so reset fails too. I tried restarting with the win 10 dvd in the drive but it wasn't recognized. To update the bios the instructions say use the install disc. I tried using Speed Gate but could only see the list of files. It does give the option of using the asus update utility which should be in programs (apps in 10) but it isn't there.
i have acer aspire 4750G with intel core i5. when i upgraded to windows 10, it didn't trace bluetooth device in device manager.
View 1 RepliesI plugged in my USB drive and I get notification USB device not recognized. In This PC it shows but it looks like this:When I right click to try and format it, nothing happens. I also tried renaming the drive letter, nothing. I tried many USB fix tools, such as, USB drive defender, Flobo, mUSB Fixer, USB Refresh, USBFix 2016, and most of them didn't even see the device in the list. It's SanDisk Cruzer 16GB.
View 3 RepliesSomething I checked after the upgrade from Build 10240 to Build 10586.3, is in Control PanelAll Control Panel ItemsSystem and went to Advanced Settings>>>Hardware>>>Device Installation Settings. First of all it's simpler now, and second of all, the upgrade reset mine to download drivers. There is no way in hell I'm gong to let Microsoft update MY drivers.
So this is a heads up to others with the same preference: Check your settings after the upgrade!
How to Turn On or Off Automatic Device Driver Installation in Windows 10
When I plug a USB3 flash drive into either USB3 port the message is Windows does not recognize it.
If I plug the same drive into another computer USB3 port everything is fine.
If I partially plug the drive in so that it only hits the USB2 contacts it works fine.
If I plug it into a USB2 port it works fine.
The drivers are installed. I uninstalled them and let it reinstall - same thing.
Since upgrading from Windows 7, I have not been able to find an easy way to switch between audio devices easily on Windows 10. What I'm trying to do is switch between my system speakers and headphones. The only way I can find to do this is to right-click the speakers icon in the taskbar, select playback devices, right-click either "speakers" or "headphones" and select "Set As Default Device."
From then on, all sounds are routed to that device. But I have to do this every time I want to switch between headphones and speakers. I think on Windows 7 there was a way to route all sounds through BOTH speakers AND headphones. I could then just use the physical device's switches to control where the sound comes from. I haven't found a way to do this on Windows 10.
Is there a way to remove Nuvoton SIO CIR Device Driver? I dont use it. I dont know where it came from but Windows Update is downloading it
View 1 RepliesJust upgraded from Windows 7 to windows 10 --all working well except continually get message " USB DEVICE NOT RECOGNIZED ,the last USB device you connected to this computer malfunctioned and windows does not recognize it "I have gone into Device manager and see the yellow icon next to "unknown usb device (device descriptor request failed ) I have tried deleting it, disabling it , updating the drivers and still get this stupid error message. Which USB caused the problem . No usb presently connected. I will not update other 2 computers to 10 if I cannot get this resolved. Was not a problem with Windows 7
View 5 RepliesMy computer with Windows 10 no longer recognizes my Hero 3+ GoPro Camera, nor my Nikon D5100. I have looked for drivers, but to no avail. Any way that I can pull pictures/video off these devices and put on computer?
View 13 RepliesI have upgraded my OS to Windows 10 from 7 and I can not see the PORTS(COM and LTE) in the device manager. I tried everything but don't know how to find it.
View 5 RepliesBIOS Version/Date Phoenix Technologies, LTD ASUS M2N-E SLI ACPI BIOS Revision 0801, 25/04/2007.This is an older MB and I have installed Windows 10 as a fresh install now and its running nicely.would I be able in the future to install windows via a USB Stick as there's no option in the BIOS as a first boot device.This is in case I ever have a situation where I can't get back into Windows and need to reinstall my OS.
View 2 RepliesI am running Windows 10 on my Lenovo Flex 3 15.
My problem seems a little complicated so I'll go step by step what happens:
1. I plug in a USB device to use it (like a flash drive or a printer)
2. Windows makes the "device recognized" sound
3. Nothing happens, so I go to device manager to see if the device is actually working. It's listed under "other devices" and it says "The drivers for this device are not installed. (Code 28). There are no compatible drivers for this device."
4. I reboot my computer WITH THE USB DEVICE PLUGGED IN and all of a sudden and without explanation the device manager recognizes the device and its driver and I can use.
5. I unplug the device and plug it back in and it goes back to step 2.
6. Also, when I click "update drivers" it cannot find them automatically and when I search for the driver manually it just gives me an error saying it did not install successfully.
This is such a frustrating problem because it means I have to reboot every time I need to use a printer or a flash drive. I also have tried everything I can think of: uninstalling every last trace of the driver and trying to let it install freshly on its own; checking the status of Plug and Play; etc.
I have messages in some devices, manager in individual devices under events
display
Device PCIVEN_8086&DEV_0416&SUBSYS_06501558&REV_063&11583659&0&10 requires further installation.
HD-compliant consumer control device
Device HIDVID_046D&PID_C52B&REV_1203&MI_02&Qid_4004&WI_02&Class_0000001A&Col029&1488b11b&0&0001 requires further installation.
And Logitech
Device {A3535E08-EB26-49A9-8AE0-786ED1242812}VID_046D&PID_C52B&REV_1203&MI_02&Qid_4004&WI_02&Class_0000001A8&2b77d581&0&02 requires further installation.
And there are more under more devices. They all appear to be working OK and have had no errors.
