I have recently built my own PC. During the initial setup process my friend create a partition on my ssd. I would like to remove the partition without losing anything.
I have a 250 GB SSD and a 1TB HDD. My OS and personal data is on the SSD. I want to keep everything where it is at or at least be able to put it back.
is there any way to move EVERYTHING to my HDD, clean the SSD, then move it back.
I have a drive that I want to use as a backup drive for a Windows 10 machine. The problem is the old drive has a boot partition on it that is making Windows 10 go nuts every time I plug it in. If I wait until after the machine boots and then plug it in via USB adapter then I can get to the files but I want to install it inside the machine permanently.A photo of the Disk Manager is below. How do I (or should I) remove that EFI System Partition? The Disk Manager won't let me do it.
View 3 RepliesI was in the process of updating several sata controllers and chipset drivers. I also installed a new USB 3.0 hub and was in the process of moving around several devices between ports. I had a problem with my keyboard which uses USB 2.0 as a connector but I would recieve a "Unknown USB Device (Port Reset Failed)" code 43 on every port on the USB 3.0 Hub. I finally gave up and put the keyboard back into the 2.0 ports on my motherboard. When I finally fixed everything. I realized my DVD drive was not working. I had to reconnect the SATA cables because it got disconnected while I was moving my PC around. Upon the last restart of my PC.
I checked Disk Managment and noticed lots of system reserved partitions and drives which were not there before. What happened but I think updating several drivers and the combination of reinstalling USB ports via device manager or the optical drive being reconnected may have messed up how windows used to have system reserves as partitions. I only had one visible system reserved drive before, now I have 2 visible and lettered system reserved drives.
I also have a unknown partition at the top of the list, I cannot right click that partition and select any options. The only option in my context menu which brings me a link to Overview of Disk Management
I also had my video quick access as my DVD optical drive when I restarted. I have fixed this issue by changing my quick access links back to their proper folders and it removed the duplicate Videos Icon. My quick access links were remapped to the G: drive (CD Drive), they were usually on the F: drive. Why Windows did that during my driver updates and restarts.
I have only provided the above information to know what the unknown partition is and why I cannot modify or remove it. It's the recovery partition of the C: Drive. The System Reserved E: Drive, System Reserved D: Drive are both considered primary partitions.
Should I be concerned or is this all normal?
I am loving Windows 10 and I want to remove Windows XP from my dual-boot configuration (and remove the whole dual-boot thing completely) but it also acts as the system partition, so I guess it's not as straight-forward as I had hoped. Is there a way to make my Windows 10 partition the system partition?
View 1 RepliesAs we all know, the classical Windows XP has a tool.... XpLitePro ... to remove all unwanted software and services you wish to have deleted. XpLite could both remove hidden programs/services which are not visible in configuration screen/ remove programs section
Question: Does Windows 10 have such a tool already? I can't hardly wait to remove unwanted stuff..
This is a new behavior over the past few days - the default printer becomes unchecked, leaving me unable to print. Happens with or without a reboot. This would be relatively easy to fix each time, except that the Devices & Printers page takes 30-60 seconds to open
View 9 RepliesProblem back with 10547. Windows Update trying to install 15 year old driver for printer. Previously hid the update with Wushowhide and it was gone for months. Back again this morning. Reran Wushowhide and it showed the update was hidden but still there after restart.
View 1 RepliesI'm using build 10240, and in the first install, it installed the Realtek audio drivers.
The problem with these drivers is that they completely mess up the sound in my headphones.
Anyways, I've tried : Uninstalling the audio manager in control panelDeleting the oem#.infUninstalling the drivers in Device Manager
None of these work. When I uninstall it, the driver is just reinstalled when my computer reboots.
I'm having quite a bit of trouble removing the generic bluetooth drivers that Windows installs for you. Those have to be gone if I want to install Toshiba Bluetooth Stacks, which I need in order to use my Wii U Pro Controller in my computer. I've gone through a few methods to try this out and all have failed.
I started out by simply uninstalling the drivers on the device manager (or whatever it is called in English). Didn't work, as the drivers were back when I had to plug in my dongle to complete the installation for TBS. When I tried this in Windows 7, it worked flawlessly, yet in Windows 10 this method did not work.
Afterwards, I tried deactivating the forced driver signature, as well as make it so Windows Update doesn't automatically download any drivers it finds suitable. On top of this, I traveled into the INF folder of my Windows folder to do steps that Microsoft recommended: rename bth.inf to bth.inf.old and bth.pnf to bth.pnf.old. With all this, it should in theory work right? Nope, it didn't. Not even after a reset.
My last attempt involved unplugging my PC from the Internet as a first step, followed by everything else listed above and then a reset. The drivers were still back, bth.inf and bth.pnf somehow magically appearing in my Windows folder when I have no Internet access. I'm at a loss as to what I'm supposed to do.
I recently installed Windows 10 on my Samsung Series 7 Chronos (NP700Z5A-A01DX). The HDD is a Hitachi HTS547575A9E384 which I originally thought was a hybrid HDD with 8gb ssd partition, but I'm not 100% sure.Anyway, with Windows 7 the computer came back from sleep in 1 or 2 seconds, now it's much slower. I've followed all the instruction online for reinstalling ExpressCache etc. but I get the error message "SSD not fund, please create a partition manually".Running DISKPART, List Disk I only have a one disk showing. (750gb, Drive 0)
View 6 RepliesI have a SSD where my operating system is installed.I also have a 3 3TB drives. A 746.52 partition on one of the drives became unallocated after installation of windows 10. I've managed to recover all the data from the unallocated partition. Would now like to fix the partition. I think it may be something to do with MBR/GPT?
View 9 RepliesSince upgrading to Windows 10 I have had to keep extending the primary partition, now up to 250Gb and full. I do have free capacity on another partition from which I have been taking spare capacity with any problems so far, but the partition tool won't let me take any more.
View 9 RepliesI need to hide my recovery partition but i'm using gpt. How to hide? The Set id only work in mbr mode ....
View 8 RepliesWhy is w10 so slow to read a partition ?
For example if i click on a partition J , w10 start to read the partition but is a lot slower then w7 ...
I work with HAAS CNC lathes and mills, which only accept FAT16-formatted USB drives. I have an old 2gb drive that is starting to fail so I got a new drive. problem is the smallest size I could find is 8GB, which is too big for FAT16. I tried using Disk Management but the resize option was greyed out. Is there any other tool I can use?
View 4 RepliesI did once manage to Partition in to 2 separate drives the Disk 2 - New Volume (G:) external drive
However I can not repeat that and instead I keep getting it split in to 3 partitions?
I only want 2 partitions 1 x 1TB + 1 x 2 TB
I am doing this on this system (Windows 10, 32 bit) Home edition, because my ACRONIS Total Image 2016 won't recognise a 3 TB drive.
BTW: I have two other registered Windows systems 1. Windows 10 Prof. & 2. Windows 7 Prof. both using 64 bit, that I don't have problems with.
Please see attched .jpeg image
I have a DELL-XPS13 Laptop. After upgrading it from win8 to win10, i noticed a restore partition is getting showed up in explorer as Z drive.
When I open Disk Management, i do not see this Z drive assignment to the drive.
I do not know how I can hide this drive.
I have a USB flash drive which for some reason is formatted with an active partition.
I usually use Minitool Partition Wizard to set a partition as inactive but for some reason it doesn't work on this flash drive. I also tried booting from the Partition Wizard boot disk but that won't set the partition inactive either. I even deleted the partition and reformatted the flash drive but it popped up as active again!
How can I force the partition to be set inactive? Note it's quite an old USB flash drive so I'm wondering if there something in the hardware which stops it being set inactive?
I purchased a 1TB hard drive to place media files on it so that I could plug it into my DVD player which has a USB port. I made sure to format the hard drive to Fat32. What I can surmise is that the 1TB hard drive is too big for the DVD player to read. I plug it in and it says Device Not Supported. But I've successfully plugged in an external card reader and used a 16GB SD card to place files on and it reads them fine. So I'm thinking it's the size of the drive that is the issue.
I might have to partition the hard drive into two partitions. One partition 16gb and then the other partition with whatever is left. They did say they were not sure if there was a way to set it up so the 16gb Partition is what is recognized first when plugged into the DVD player. This way I would transfer movies I want to watch to the 16 GB partition, and transfer them over.
Now when I search hard disk partitions in Windows 10 the manager comes up and I can see the hard drive, but I can not change the size to partition it. It's grayed out. Is there a freeware program that works with Windows 10 that will split the hard drive into two partitions in sizes I specify, and make sure that the 16GB partition is the first one loaded or seen? And if I set it up that way when I plug it into my computer will the computer see both partitions?
Had 8.1 then downloaded 10, unfortunately when I originally installed 8.1 I made my C partition too small and it's almost full all the time.
Is there anyway to increase the size?
Also I want to reset my PC right now since it's gotten extremely sluggish for some odd reason and I can't see any thumbnails for many things despite trying loads of stuff suggested on the web.
When resetting will I get any option to change the partition size?
Until recently, I ran a dual boot system with Ubuntu - but for business reasons, I uninstalled it (along with it's bootloader). Anyway, I cleared up the hard drive space in the Disk Management app on windows 10, I have about 350GB free space from Ubuntu and I cannot extend the C: partition, you can see what I mean here
I can't seem to extend my partition and whatever program I use I have to buy the full version to extend my partition,
I have a two laptops with Windows 10 x64. Recently I noticed new partition with next available letter. Size is 128mb and it can't be accessed. I checked in Disk Management but this partition is not listed there as per the below screen:
I used MiniTool Partition Wizard and managed to see details about this partition.
I tried Diskpart to remove Drive Letter but no luck:
This happened at the same time on my two HP laptops but not sure what could cause it. Maybe some Windows update? I do not remember installing any new apps. I would like to remove this disk from the list of available disks.
I had 2 useless partitions, one at the very beginning of my HD and the second at the very end. My setup is GPT Basic btw.
I would like to know, using MiniTool Partition Wizard version 9.1, if it is possible to merge these former partitions (now 'unallocated' space) into the Windows partition (C??
I right clicked on both of the unallocated space 'partitions' but any operations (namely, move) was greyed out.
I would like to clean up the disk layout (even if we are talking about only 1 GB. of space)
The volume (V:) is formatted as Fat32. Maximum Fat32 volume size is 2 TB. To regain all of the volume space, format as NTFS, or split into 2TB and 1TB Fat32 volumes.
View 1 RepliesI just assembled a new PC. It has a single 4TB hard drive. During Windows 10 installation, I created a 200gb partition to install to as the C: drive. It auto partitioned my drive into a 500MB system reserved partition, my C: drive, and two unallocated spaces of 1852.69GB and 1678.02GB respectively. The 1852GB space I can create a partition on, but the 1678GB space I cannot do anything with: Cannot create a partition, and cannot combine it with the rest of the unallocated space.
I would like to combine the two unallocated spaces to create a single partition from the remaining unallocated spaces, but cannot figure out how. I contacted Microsoft tech support via chat, allowed them to remote in to my machine, but they could not determine the issue either.
Need to make a ext4 logical partition but it is allowing only primary:
View 9 Replies
