Drivers/Hardware :: Intel HD Drivers Trying To Update But Device Is Disabled
Nov 12, 2015
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
I very briefly switched on the IGP whilst swapping from Nvidia to AMD last month and now Windows Update is constantly trying to update (and failing) the drivers even though no Intel drivers are currently installed, I used DDU to remove the Intel and Nvidia drivers.
How to stop it? Now whenever I open Windows update I get updates are available for Graphics Adaptor WDDM1.1, 1.2 and 1.3 for Intel HD Graphics 4600
Upgraded Win 7 Pro Dell laptop to Win 10 Pro. Screen resolution changed on first win 10 boot and other resolutions greyed out. Windows update says unable to update Intel HD graphics drivers. Downloaded win 10 drivers from Intel site and installed. On reboot get continual bsod as above. No restore point since upgrade. Can't boot to Windows. how to get past the bsod
Upgraded old laptop (HP Pavilion dv2225) to WinX and everything works except for sound. Device Manger (Win key+ X) shows no missing drivers for sound. Used to play AoK under Win 7.
It used to be possible to do this in Device Manager IIRC, but with Windows 10 installed I can't see how to get a device driver report. Has this been taken away? If so what will produce such a report?
I have just done a Clean Install of Windows 10 on my Sony Vaio VGN-NW21ZF laptop following a partition corruption while trying to repartition the HDD. previously it had been upgraded to Windows 10 from Windows 7 and there were no device driver issues.
All appears to be working OK, but in device manager I have two unknown devices that do not have drivers installed. On is described as Base System Device, and the other as Unknown Device. Looking at Sysyinfo I see the following details:
How do I work out what these devices are so I can try to find the correct drivers?
Looking in Computer Management I see this information
Over the past few weeks I've been trying various Alfa Wi-Fi adaptors, and different drivers. I've now given up and bought a device (TP-Link) that has a driver built into Windows 10.
However, when I plugged it in it seems to have picked up on an Alfa driver, possibly as the chipset is similar.
Is there a way to purge all drivers for a device type, except the Microsoft ones?
I have a laptop with an intel AC 7265 wireless adapter built in. With the normal Windows 10 driver, AP mode works - which I need to run Connectify.
I upgraded to the latest Intel driver as I was having other issues (Wireless would just disconnect and give me a 1609 address) but the new driver apparently doesn't support AP mode (hosted network support = no).
I have an Acer Aspire E5-571 and am trying to switch from the graphics driver provided by Acer to the newer version for my graphics card available directly from Intel. The card model is HD Graphics 4400 and the CPU is a 4th gen Core i5 so I'm pretty sure this is the correct driver.
I have tried uninstalling the graphics driver through the Windows Device Manager, then rebooting and installing the driver from Intel, but I continually get the message about my computer having a customized driver from the computer manufacturer. It seems that as soon as I uninstall the driver, it is immediately reinstalled by Windows, thereby not giving me the chance to switch to the Intel driver.Is there a way to manually switch to Intel's driver?
I have an ASUS e56u laptop that I updated from Windows 7 to 10. Since the update the -Intel(R) Centrino(R) Wifi N-6150- driver is not starting up. It is the newest version (ver15.12.0.9).
I updated W7x64 to W10 Pro x64. The machine is WXP generation notebook. My problem is that the Intel PRO/Wireless 3945ABG is not recognized or Network and Sharing Center - Change Adapter Settings does not list this adapter. The Device Manager does show the adapter but with exclamation mark. What I have done so far are uninstalling/reinstalling the adapter and installing the drivers in compatibility mode.
For my mobo, Asus P8Z77-V-Deluxe, I downloaded the official asus chipset drivers.
There is one for Win8.1 x64 and a Beta version for Win10.
The chipset driver for Win8.1 has installed the following:
1. under Device Manager> IDE ATA/ATAPI controller > Inter 7 series/C216 chipset Family SATA AHCI Controller
2. Version 12.8.0.1016 - Date 2013/08/01
If I install the Asus Win10 chipset driver, then instead of the Inel SATA controller, I'll end up having Standard SATA controller by Microsoft.
I'm currently using the Asus beta Win10 chipset driver, however I manually installed the Intel SATA controller which is officially supported on Win8.1 and is digitally signed.
I ran two SSD benchmark test with AS SSD (latest version).
With just the official Win8.1 chipset driver as mentioned above, I'm getting the following results:
With the Win10 beta chipset driver and the Standard SATA controller by Microsoft:
And here are the test results made by Intel SSD 520 Series Solid State Drive | Intel,SSD,520 Series,Solid State Drive,SSDSC2CW240A3,Benchmarks,Performance,Reviews,Olin Coles,Intel SSD 520 Series Solid State Drive SSDSC2CW240A3 Benchmark Performance Review by Olin Coles
I have a PC with Asus P9X79 Deluxe motherboard. It has Intel chipset and Intel BIOS RAID (RSTe) and 6 SATA ports connected to it. The chipset IDE controller lists in Linux as:
Intel Corporation C600/X79 series chipset SATA RAID Controller (rev 06), and the PCI ID is: 0104: 8086:2826 (rev 06).
My RAID configuration is 2xOCZ-VERTEX4 256GB SSD's in RAID0, as boot drive (C: drive), and 2 (quite old) WDC WD2500KS 250GB disks in RAID0 for extra storage (games, movies etc) (J: drive).
So yesterday I decided to upgrade my Windows 7 Ultimate to Windows 10 Pro. All seemingly went well during the upgrade process, and the system booted fine, and most stuff seemed to work as it should. But after a while when I accessed files on the J: drive I started experiencing random (temporary) freezes.
Then after a while it got more serious and the whole system froze, I had to hit the reset button.
So I rebooted and looked in the event log, I get see tons of errors there saying that the disk has a bad sector.
Then I try using the J-drive again, by viewing some videos there, and it works fine, but after a while there are some freezes and then I see in the event log, that the drive was reset. After this it works again for a while but then another of those resets comes, and freezes everything for a short while (like 30 seconds).
But when I try to copy some large files off the J-drive, another reset comes, and then the event log starts showing a lot of the error messages from before, with "the disk has an bad sector". (I will post screenshots of these errors after I reboot back into Windows).
After this I can't access the J-drive at all, and Windows gives me error messages when I try to.
So, I figure that I might have just got unlucky and the old WDC drive actually developed read errors, although it's strange that it happens exactly when I install Windows 10 (these drives are something like 7 years old).
Well I can't copy the contents off the disk from Windows since it keeps failing as described above, so I boot into Ubuntu Linux from a USB stick, so I can use ntfsclone to image the J-drive to another disk. I start it running expecting that I'll start seeing read errors, but to my surprise there are NONE. It also copies all files off the J-drive without any problems from inside Linux!
So it was after all not the old drive that had failed, but instead Windows 10/Intel had failed me in a big way.
I trawled the web for updated Intel chipset drivers and installed those from the Asus site, but it made no difference at all. I couldn't find any other Intel drivers and when I searched for the RST drivers on Intel's own site, I could only find ones for Windows XP upto Windows 8.1, but none for Windows 10.
For now I'm left with a PC that I can't use, because I can't go back to Windows 7 and Windows 10 is not working with my RAID arrays. I got some spare 2TB disks, and I'm right now copying all the data from the old J-drive (the RAID1 about 500GB) over to this, hopefully I can then work in Win 10, but I am VERY concerned because the same RAID and drivers are used for my master boot drive with the two OCZ SSD's.
I get this error on a Surface Pro 3 which I have updated to Windows 10. It normally occurs when playing Minecraft, anywhere from 5 minutes to 1 hour after opening. I have attempted to update the drivers, but it says that the drivers are up to date (which is odd as I am using Windows 8 drivers on a Windows 10 machine).
i have my ASUS X555LD for almost a year now, so as far as date is concerned my laptop shouldn't be too old to suffer such illness. So it came with Win8.1 x64 of course and just recently, as soon as Windows 10 was released, i upgraded quickly.
but right after i upgraded to Windows 10, my laptop became ill and had this errors:
1. i got BSoD Most of the Time, one would say CRITICAL_PROCESS_DIED or UNEXPECTED_STORE_EXCEPTION. there are times my laptop would freeze in the BSoD, not even the 0% would move to 100%. so i had no other choice but to force shutdown it, and sometimes after turning my laptop on again i end up at my BIOS with no HDD nor BOOT ENTRY listed. as i experimented, i had to press slightly hard on the right side of my Laptop where my HDD is Located just for my Laptop to re-read my HDD once again, as soon as i got back to Windows 10, i ran an HDD Check and nothing was wrong, no bad sectors or anything. this is confusing me as to how it is happening. so i somehow got used to BSoD since my Laptop frequently experience it. sometimes just a simple movement that would shake my laptop would turn into BSoD again, i suspect something like my HDD or loose or the likes. i dont really know.
2. after the BSoD Case, a week or three i guess. i started to loose Audio Ability. it was just this morning, the Volume Icon has a "RED X" on its icon and states "No Audio Output Device is installed.". and after checking my Device Manager, to my surprise the Built-in Audio Device (Realtek) is not there. i don't know how or why it happened but i can't get it back.
even checking the sound tab on the control panel doesn't bring out Audio Devices.
i was wondering if ASUS or the PC Store where i bought my Laptop would fix it for me as per warranty is involved ?
I recently put my camera memory card into my computer to download photos. I couldn't open them and need to leave so hit "remove device" figuring that I'd go back later when I had more time to get them. When I went back and reinserted the card it didn't show up. I've tried to "add a device" but it still doesn't work. When I hit the device and printers icon it doesn't show up. What do I do?
Reading this [URL] there is a troubleshooter which I have downloaded and run. According to that there are drivers for my HP 710C and D1460 printers waiting at windows update but it is not downloading and installing them.
I have enabled automatic driver installation and wu is set to automatic, yet no drivers.
I have a Sony Optiarc DVD drive. When I first upgraded from Windows 7 to Windows 10 it was working but later it is not. It shows in the Bios but not in Windows. I even bought a new Lite-on DVD drive and put it in and still not recognized by Windows 10.
I noticed after a clean install of Win 10 Pro that in the Device Manager I had two "Standard SATA AHCI Controller" entries that showed the driver dated in 2006. I run 2 x SSD's a HDD and a BluRay writer.
So I downloaded the latest version of SATA drivers at the Asus ROG site for my motherboard. After running, one entry in Device Manager has changed to "Intel(R) 8 Series/C220 Chipset Family SATA AHCI Controller" but the other remains "Standard SATA AHCI Controller" - still with the 2006 driver version 10.0.10240.16384 dated 2006/06/21
ALSO: The driver installed "Intel Rapid Storage Technology" program. Do I need this? If I do need it, must it be enabled at start up? I am wondering if it might conflict with Samsung's Magician which I also have installed?
I am being bugged by a problem associated with USB ports apparently being intermittently disabled or disconnected.
The result is a cacophony of device disconnected sounds being played. It ultimately means the PC has to be shutdown. Occasionally a device connected sound will be heard as well.
I have heard that Win 10 is disabling or disconnecting USB ports to save power for tablets and such. Understandable for limited power availability but for PCs where power is always available this seems misguided.
I need to know if this is by design or can it be selected off via registry option.
In win7 and win8.1, i could set the screen of my tablet (Lenovo Miix3) to switch off after 3 min (not sleep, just switch off the screen). Tapping the touchscreen would bring it immediately to life again.
With win10, this does not happen. I need to click the on/off button to bring up the screen. So, it seems that Win10 switches off the touchscreen electronics. This is not a hardware issue, because previous Windows versions would let me switch off the touchscreen backlight but retain its sensitivity to touch (and therefore switching on upon tapping).
What do I need to do to restore the standard behavior (tappable touchscreen after switchoff) in Win10?
My touch screen randomly won't work, only to find that it's disabled in Device Manager. "USB Input Device" is what it shows up as. I believe it's a software I have installed that may be interfering.
New build. From a fresh install of windows 10 i try to install the drver for my IGPU Intel HD 530. each time i do that i get a BSOD with this message:
VIDEO_TDR_FAILURE igdkmd64.sys Or sometimes it's SYSTEM_THREAD_EXEPTION_NOT_HANDELED igdkmd64.sys
I've tried drivers from motherboard manufacturer CD, website and intel and some autodetect driver software. I always get the same behavior:
The screen start blinking several time ( black screen) before showing the BSOD then reboot and repeat it self. Even the driver downloaded by windows update have the same impact.
I've managed to install it in safe mode but when i restart in normal mode i get the same behavior. I've tried 2 different monitors, VGA and HDMI , tried with UEFI on/off => same result. I've tweaked once the tdr delay to 8 second, but didn't work.
CPU: Intel I7-6700KMotherboard: ASUS Z170 PRO GAMING RAM: HyperX FURY HX421C14FBK2/16 - 16Go Kit (2x 8Go) 2133MHz DDR4 Non-ECC CL14 DIMM SSD: Samsung EVO 850 MZ-75E250B/EU 250 GB with 80 PLUS 550W power supply. OS: WINDOWS 10 FRENCH HOME X20-25432
Since upgrading to Windows 10 when ever I launch a game my wireless card gets disabled and is not enabled until I exit the game. I have tried updating drivers for the card and the graphics card and nothing has worked.
Graphics - Dual graphics Intel and Nvidia GTX860m (Drivers: 355.60)
Upgraded (???) a Windows 8 machine (HP with MS ergonomic keyboard) to Windows 10 a couple of months ago. It seemed to work, but most of the apps didn't work, and I couldn't access files as Administrator. this week I upgraded (???) a Lovono using Windows 7 to Windows 10. They are networked with printers and other computers via ethernet. Thursday afternoon the HP stopped recognizing key strokes. It allows password input on restart, but will not type anything else. It clicks like the buffer is full. Yesterday the Lovono started doing the same thing. My first thought was virus, although McAfee runs constantly on both machines. Used Malwarebytes on both and found a few PUPs, but no malware or virus. One forum suggested using DriverWizz, but it didn't change the keyboard driver. The Windows 7 computer on the same network, sharing files with both, is unaffected as yet. I'm thinking the solution will be to junk Windows 10 and go back to 7 and 8. If Windows 10 were a Vacuum Cleaner it would be terrific, but sucking like this is not all that terrific for an OpSys.
