Drivers/Hardware :: Left Screen Turns Off 2 Mins After Boot Once Every Day
Jan 27, 2016
Recently I have wired to screens up as dual screens, they were working fine at day 1 but after the left screen (main monitor) has started turning itself off completely.
As soon as I boot, the screen goes black and I am greeted with the screen startup logo, then "no signal detected" Windows will only pick up the one screen (right monitor) until I restart the screen from the plug. My main monitor is connected via HDMI from the GPU into the screen, and the other DVI to HDMI adapter, again from the GPU, The weird thing is no matter what I try, it will always be the left screen, I have tried:
Swapping the screen over with another
Changing plug sockets,
System Refresh
Swapping screen power supplies
installing drivers
swapping HDMI cables
I can only assume it's something to do with Windows, but what is it?
View 3 Replies
Similar Messages:
Aug 17, 2015
I just updated my display driver to the latest from Nvidia. Now the left half of the display is darker than the right half. I tried uninstalling the driver and reinstalling, but the problem remains.
The driver is Nvidia 355.60 WHQL , and yes my display card in on the list of supported cards. This is the driver for Windows 10 64 bit and my Nvidia GTS 450.
I have never seen this issue before and I don't know if it is Windows 10 or the Nvidia driver causing the problem.
View 1 Replies
Feb 18, 2016
My Screen is displaying off center to the right just a little. I only found one other mention of this on another forum with no solution. There is a black strip on the left hand side of my screen. The other post was on a MS forum they theorized it had to do with the Intel HD device driver. I did not have this problem with Windows7. Hope the graphic card I have coming will fix this.
View 6 Replies
Sep 28, 2015
I've installed the latest insider on my desktop as it works fine on the netbook, and now the screen turns off after the boot screen, the computer doesn't hang and seems to show signs of working (HDD light flashing). The video card is OK. Once the screen came up after plugging a USB drive, and once the computer booted normally with screen, but now it doesn't.
View 5 Replies
Aug 6, 2015
I did an upgrade from Win 7 , and Screen Saver / Turn off display after 5 mins was working under Win 7 64 bit.As my title suggest Screen Saver / Lock screen Slideshow / Turn off display after 5 mins are not working under Win 10.The Lock screen Slideshow is there when Win 10 starts but only shows ONE image, never moves to another.
THINGS I've done so far to get any of these working ...Screen Saver / Lock screen Slideshow / Turn off display after 5 mins.I’ve turned off all the Wake on lan functions.Tried different folder/ images for the lockscreen Slideshow ,window spotlight and picture.Tried to set new power options , was able to get SLEEP to show up in "Start" as it was not there before, but once click , the display DID turn off, but wouldn’t turn back on with mouse movement keyboard presses, had to do a hard reboot. Win 10 started without issue and the SLEEP mode was no longer aviable via the power "start" menu.
how to get all of these working. Really would like my display to turn off after 5 mins , and the Screen saver to work , the Lock screen.
View 12 Replies
Jan 5, 2016
I reinstalled windows the day before yesterday and since then every time I turn my laptop on after entering my password the screen turns off for like 2 seconds then turns back on. This have never happened to me before. I tried putting my old windows back via Macrium Reflect and I even tried reinstalling it again but neither of those things worked. I have an Acer Aspire V3-572g laptop.
View 9 Replies
Jan 5, 2016
I recently upgraded to an SSD, I don't know if this is related.
While my PC was idle, it shut down for some reason (probably updates). I came back to an "Updating Windows" screen -- the exact screen used when installing, that big circle icon with a percentage. I have never had a computer boot to that on its own, but I assumed it was some important update. I let it do its thing.
Later, I came back to it doing this strange boot loop:
Motherboard splash screen
Normal W10 loading icon
Screen flash
A second, slightly larger loading icon
The "Updating WIndows" screen. Starts at 0%, raises to 75% a split second later, then disappears and turns off. This happens in about 1/5th of a second.
I booted into a startup repair disk, and ran startup repair. It said it couldn't fix issues. Next, I ran a chkdsk, there were issues it fixed but the boot loop is still in place.
Since I just installed an SSD last week, I still have my previous disk with the operating system still functioning. I booted it up, turned off automatic updates, and checked to see what may have caused this on my current disk. There were 2 updates available: A flash player update for IE, and Windows 10 version 1511 10586. I assume it is the latter, but how it installed, since I DID NOT AUTHORIZE THE INSTALL. Automatic updates are enabled, but I would have thought it'd install in November, when it was released (not 2 months later!)
I don't dare install it on my backup, in case I have to re-clone the SSD.
View 1 Replies
Jul 31, 2015
I've just upgraded my win 7 installation to win 10. The power and sleep setting was carried over, turn off screen after 5 minutes, but the monitors stay on forever. I checked the network adapters in the device manager (BT personal area network, BT RFCOMM, Realtek PCIe GBE family controller) but none of them had power options or anything related to waking up the computer.
View 2 Replies
Aug 31, 2015
I'm using a Packard Bell Easy Note TE Laptop (forgot the actual model number), upgraded from window 7 to Win10. After 30 minutes from logging in, the screen turns off regardless of whether I'm using it or not and brings me to the log in screen, just as if I put it to sleep or something.. It doesn't seem to matter if it's plugged in or not and it doesn't matter what I do in the power settings.
View 4 Replies
Sep 18, 2015
I'm running Windows 10 64-bit and whenever i right click on desktop the screen turns black. Check out video for more details(The video is in windows 8.1 but the problem is the same and still persists).
View 8 Replies
Sep 21, 2015
I have freshly formatted my computer, installed all the updates and drivers, I have also RMA'd my video card (which i thoroughly tested and found it works fine on other computers.) but I cant figure out why my screen goes black but the computer keeps running. I can hear my music still playing and I run a dual monitor setup but when my screen goes black both monitors keep bouncing around the "Analog / Digital" box and thats all i can see, i have tested the monitors on other computers and they work fine as well.
View 9 Replies
Jan 20, 2016
saw other post about Crashing without BSOD, and i followede some of the steps other people had to no luck. screen turns black, says no signal(one says no VGA and other say no HDMI), sounds cuts off, PC is still on, Lights in mouse and keyboard have to shut down the pc manual no BSOD.
ad the problem for some time now. first time i got them was in the Starcraft 2 legacy of the void, in some of the cutscenes, but only in the cutscenes, and now i have it again in blade and soul. sometimes at the login and sometimes when i enter the game(Cutscene). URL....starcraft was random times some cutscens were ok, some not, What i did was instant esc and watchede the cutscene online if it crashede) every other game i played/tryed i never crashede like this. WoW fallout 4 so on.
specs:
GPU: AMD radeon HD 7950 3GB
CPU:Intel Core i5-3570 @ 3.40GHz
Ram: 8GB ddr3 1333MHz
hard drive(s) 1: Samsung SSD 840 series 250GB
hard drive(s) 2: 500GB (SATA 6Gb/s) 7200RPM
mainboard: ASUS P8B75-M
PSU:XFX PRO XPS-550W-SEW
Windows: 10.
what i have try'ed so far. update all drivers,(also BIOS)removing mouse/keyborad/headset from usb(when the game was in loading scene to the cutscene removeing Ram blocks,MemTest did a Verifier /standard /all in CMD crashed(got minidump file) HW monitor C* on pc, GPU never came over 65, CPU never over 70 no overclocks Checked Voltages seems to be in range,
use WhoCrashed to read the DMP file.
On Wed 20-01-2016 19:42:35 GMT your computer crashed
crash dump file: C:WindowsMinidump12016-4453-01.dmp
[code]...
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time. URL...
View 1 Replies
Dec 31, 2015
I installed Windows 10 yesterday but had to return back to Win 7 because the driver problems crashed the whole system. Basically what happened was that I was stuck at black screen after every boot and got back only when going to sleep-mode through power button and back.
I tried to uninstall all graphic drivers but it doesn't really work when Windows is reinstalling them immediately. I though that I would only use my Nvidia and downloaded the latest drivers and after that disconnect from Internet but the driver installation just crashed the whole system. When I rebooted it crashed again so only thing I could do was to boot in safe mode and go back to Win 7.
View 1 Replies
Jan 19, 2016
I've had an issue with my laptop : it randomly turns off when I play some games without even a blue screen or a crash of any sort. It only happens with some specific games and happened a few times on each, something like once every several hours.
The games I've had these problems with are World of Warcraft, Call of Duty 2 and Civilisation 5. At first I thought this could be caused by some sort of exception unhandled by my processor, but it would give me blue screens, not just my computer turning off.
I've read online that it could be caused to overheating but WoW worked just fine when I was using it on the same laptop with windows 8.1, and amongst all the other games I play on this pc, WoW, CoD 2 and Civ 5 are really not the ones that use the most resources.
Note that it doesn't turn off like it would by just shutting windows down, there's no windows 10 shut down screen or anything at all and the programs running don't close before. It just goes black instantly.
View 7 Replies
Sep 13, 2015
So I was in my bios and I changed my CPU mode offset sign from + to -, I saved the settings and exited. When the PC restarted it came on perfectly fine but I am getting no signal on my monitor and my razer keyboard & mouse aren't coming on or lighting up.
My motherboard is a P8Z77-V LX
My CPU is a Intel Core i5 3470 3.20Ghz.
My RAM is G.Skill RipJawz 1866mhz 4 X 4
My GPU: Asus GeForce 660ti DirectCU II OC Edition.
I googled around and it said to take the battery out for 10 seconds and put it back in, I did that and no change, I also took the jumper from 1-2 and put it on 2-3 for 10 seconds then back again, Again no change.
Ive reseated the RAM/GPU and CPU and nothing seems to be working.
The pc turns on fine but nothing seems to be working.
Even my Corsair H80i pump LED changed from white to pink which is the colour I set it. All fans are working too.
Why I changed my cpu offset mode, Before this issue I just had a bluescreen for WHEA_Uncorrectable_Error, I turned my PC back on and I googled around and it said it was something to do with my CPU voltage, and one person suggested to try and change it from + or auto to -, So I restarted my PC and changed the cpu offset mode from + to -, after that it doesnt seem to be working and im not quite sure why.
What I can do to try and solve this issue or should I just order a new motherboard?
View 9 Replies
Aug 31, 2015
My computer screen turns black sometimes when I leave it for a minute. When I press the power button it doesn't turn on, to get it working again i need to hold down the power button for 20 seconds then press the power button again.
View 10 Replies
Feb 10, 2016
i have a corsair h100 from 2012 that has been acting weirdly. it randomly boosts itself high rpm then back to normal and sometimes turns itself off. i have to shut down my computer then start it for the h100 to turn on again.
i've checked the wires and im sure they are fine. since a restart does not make the h100 to turn on again.
is this normal wear and tear on something like a processor cooler that is 4 years old? should i rma if the warranty still active?
View 1 Replies
Aug 2, 2015
So I upgraded to Windows 10 and I was using it and shut down my computer. Now my computer turns on but won't load anything. It shows the windows loading screen for about 5 seconds and then goes blank and sits that way till I turn it off and restart.
View 1 Replies
Jan 30, 2016
I have an ASUS UX303ln with a clean install of Windows 10 in UEFI boot mode. It seems that: when I turn off the computer it turns off the screen and fans, but stays on, consuming an unusual amount of energy (in about 30% of the cases it actually turns off properly)When I hibernate the computer, same thing happensWhen I put it to sleep, in about 60-75% of the cases it won't wake up, instead it will just enter this high power mode with screen off, mentioned in the first bullet point.
These issues persist, even after turning off hybrid sleep, fast startup, hibernation, changing over to CSM boot, trying to downgrade/update drivers for Intel Bluetooth (which sometimes was stopped by windows due to not being Windows 10 compatible), the Management Interface, and Intel and Nvidia drivers.
View 1 Replies
Sep 24, 2015
Sometimes, when I shut down or restart Windows 10 64-bit, just before the screen turns black it makes the critical stop sound effect. It does not effect anything, the whole shut down process is like 3 seconds, which I really like in Win 10.
Nevertheless it bugs me a bit, I also had this sometimes in Win 7. I'm not running any programs while shutting down, it would notify me if I did.
View 1 Replies
Jan 12, 2016
I hooked up my computer to my TV with my VGA cable. After a few seconds, the screen glitched and it was later stuck on the left.
View 1 Replies
Mar 5, 2016
Ive come to the conclusion I've blown my right speaker as it is hardout crackling and nothing ive done changes it. I was wondering how can I send all my sound to the left speaker. I tried changing the levels but all that does is turn off the right speaker i dont get the sounds that should be going to the right speaker coming through the left which is what i want to do.
View 7 Replies
Aug 13, 2015
I have multiple small scroll bars on my screen whenever I am done scrolling on a page. If I hover over the scroll bars with the mouse, the 'busy' windows thingy spins around. All my drivers say they are up to date. Picture attached.
Dell L702X
Intel 3000 graphics
View 4 Replies
Feb 12, 2016
After upgrade from windows 7 everything works properly. After o while it was not possible to open the START MENY by left click the windows 10 icon in the lower left corner. Right click works ok. What is the reason to that?
View 1 Replies
Feb 23, 2016
The Start button in lower-left corner of screen/desktop is not responding to left click. Is there something an amateur can do?
View 4 Replies
Jan 5, 2016
I enabled tray balloon on my Windows 10 but it is showing up on the top left corner of the screen. How do I fix that?
View 4 Replies
