Drivers/Hardware :: Lightscribe Drive Won't Write Labels
Sep 7, 2015
Normal PC that was running win 7 Pro. Had an HP 1260 Lightscribe drive. Burned CDs, DVDs AND Lightscribe labels... Worked perfectly. Worked for years. I know how to use it.
Upgraded from Win 7 to Win 10 Pro. Concurrently, my hp 1260 died and I bought a TSST L632M USB Lightscribe drive. I plug is into a USB port AND IT WORKS. It burns CDs. It burns DVDs. It does NOT burn Lightscribe labels. Drive is clearly marked "Lightscribe". The Internet SAYS it's a Lightscribe drive.
The Lightscribe service is running. The Lightscribe Control Panel SAYS IT'S THERE. The DISK is a TDK and clearly marked "Lightscribe". As near as I can tell, it should work.
The Lightscribe template labeler goes through the WHOLE process of "writing" with the animation showing the text being written. BUT, the drive LED never flashes, and nothing gets written.
I tried it on a SECOND machine - one running Win 10 HOME. Same result. Unfortunately, I've upgraded all four PCs to either Win 10 Pro or Win 10 Home, so I no longer have a Win 7 PC to try the drive on.
WHY this thing won't do what it's clearly marked to do? Driver of some sort?
View 9 Replies
Similar Messages:
Oct 11, 2015
DVD-RW are re-writable correct? I tired to format it and it said i couldn't because of write protection is there any way I can remove the write protection on it?
View 2 Replies
Feb 2, 2016
I tried CMD, StorageDevicePolicies in Regedit but nothing. Still Write Protected.
View 3 Replies
Aug 17, 2015
I have upgraded to window 10 about a week ago and I have Samsung DVD Write SH224DB/RSMS DVD supawriter, in my pc desk top pc and since upgrading to windows 10 I can't use it, it do's not even show in the devise manager or any online hardware dives programs.I do know it has power to the device but will not read and disc or film disc.
View 5 Replies
Dec 20, 2015
I reset the computer and got it all back and when I turned on the computer this morning the icons were missing and just the names of them were there. and on the task bar there are icons there but not the ones that fit the names they are like a dll file, then on top of that I tried to go into properties and see what was happening there and I cant do that either.
View 1 Replies
Jan 12, 2016
How can I print labels directly to stock. Now it keeps insisting on a PDF file that does not print to label stock correctly.
View 11 Replies
Jul 30, 2015
Is it possible to only show the icons in the favorites bar, and get rid of the labels?
View 6 Replies
Sep 9, 2015
When I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
View 9 Replies
Jan 14, 2016
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
View 2 Replies
Apr 14, 2016
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
View 9 Replies
Jan 9, 2016
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 Replies
Oct 24, 2015
I have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
View 6 Replies
Feb 10, 2016
Whats up with the missing text labels? Sometimes its my start menu sometimes its the right click menu.
View 7 Replies
Feb 10, 2016
I have been working with windows 10 X64 PRO for a little bit now. I can still not figure out why my scripts (.vbs) or .exe that I push to or use on my domain machines will not edit or create keys in the registry. The only way i can do it is to full kill UAC then reboot then make changes then turn it back on then reboot again. Listed below our the UAC settings we have set for our select few windows 10 machines. We have UAC fully off in windows 7, but it is needed in windows 10 to have apps run.
[HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem]
"ConsentPromptBehaviorAdmin"=dword:00000000
"ConsentPromptBehaviorUser"=dword:00000000
"EnableInstallerDetection"=dword:00000000
[Code] …..
What I need to do so i can make registry change on the fly. This going to be a big deal breaker for us to move to Windows 10 if i can not change values.
View 1 Replies
Sep 15, 2015
I upgraded a workstation to Win 10 Pro. The system, System X, has two admin users, A and B. A is logged on to System X. Volume C is shared from the root on System X, and all admins on the system have permissions to Share C with full control. B is logged on to another system, System Y (Win 8.1). B can access (read) almost all folders on System X from System Y, but cannot write to the folders as he did in the past. I included a screenshot of the sharing options, which are the same for all networks, though Network Discovery is off.
View 9 Replies
Jan 4, 2016
I have a Freenas Server (based on FreeBSD Unix) connected to my network. I can't get it to show up in file explorer untill I type "//000.000.000.000" (it's IP address). When I try to drag a file to the window CIF shares (Permissions in Unix are Allow Guest Access and Recursively set sane default windows permissions on share) I get the error "You Need Permission to Perform this Action". Both of these features worked on Win 7 Pro before I did an upgrade to Win 10 Pro. I also did a fresh install of Win 10 Pro and it made no difference so I restored a Macrium image of the Win10 Pro Upgrade.
View 8 Replies
Oct 27, 2015
( do you want to allow this app to make changes to your pc ( yes ) ( no )). And we all know the pros and cons of disabling the UAC. Wouldn't it be good if the Yes Box was automatically Clicked for you. All we need is some type of Batch File that would specifically watch for that Message and Answer it for you. Or maybe hidden deep within the registry it may be possible Tick the right Box to do it for us. Looking for some Positive Answers.???
View 3 Replies
Aug 15, 2015
My standard Documents located in C:users...documents is no longer a writable folder following upgrade to Windows 10. Affects Visual Studio, Outlook and some other software. eg for Visual Studio 2013: CurrentSettings.vssettings cannot be written. I own the folder of course and attempts to remove the "Read Only" flag appear to work and then immediately fail when I attempt a write operation to a file in one of the folders. I am administrator but this doesn't useful. Also logged on as a local user instead of Windows Live account, but same results.
View 6 Replies
Oct 16, 2015
As described above, I have games with varying degrees of the problem. Some cannot save settings, still some other cannot save game progression, the worst has it both. I was able to do various workarounds that let me partially solve the problem.
However, I hit a block with my newly installed Metro Last Light Redux, it doesn't write any saves anywhere. I Googled my problem and no solution fit me, I tried writing an "attrib" modification on "My Documents" using an elevated command prompt to rid the "Read-Only" attribute but that still didn't work. I tried taking ownership of the folders in question but still nothing.
View 1 Replies
Aug 8, 2015
I have only one active account on Windows 10, and it xy -> account type is administrator. My UAC settings are set to never notify. Now every program that i run is not run as admin (as was the case on windows 7) but rather as normal user account. Is there a way to change that globally?
Some problems that i have because of that: Torrent program can't write on disc (first time i see this), all games can't update and write to disc, they run fine tho. I usually let BSPlayer to download subtitles and write them in movie folder that doesn't work as well. If i right click -> run as admin program s work fine but it's a hassle i want to avoid.
View 1 Replies
Oct 11, 2015
I recently upgraded to windows ten but ever since I did my computer keeps telling me I do not have the correct permissions to read/write files. I have tried to change the settings to allow the one and only account the permissions. It works temporarily but after a few days it goes back to not allowing me again. I also tried activating the built in administrator account to save files but of course a built in administrator account cannot access the same things as the original account can.
View 4 Replies
Oct 3, 2015
Today i turned my computer on and for some reason I cant restart it( the shutdown/restart on the right bottom corner is locked) and my password is locked(cant write it).
View 1 Replies
Dec 10, 2015
I disabled UAC & i'm using the only account on this system, which is admin. Yet i'm not allowed to write to C roots and being ask to write in many other places.. How do i disable that & i'm having admin rights ALL THE TIME while using my admin account..?Ok so what i mostly need is the ability (permanently) to write to C: disk root. How do i do that?
View 9 Replies
Oct 3, 2015
Today i turned my computer on and for some reason i cant restart it( the shutdown/restart on the right bottom corner is locked) and my password is locked(cant write it).
View 1 Replies
Jan 1, 2016
Everytime I wake up my desktop from sleep, I get the BSOD with the message - Attempted Write To Readonly Memory, and the system restarts. I have this problem for a few months now, since I was on Windows 7. I thought the problem might go away after upgrading to Windows 10. But even after the upgrade, the issue still remains. It is pretty annoying as I can't leave my system idle for a few minutes. I'm attaching recent dumps and msinfo file ....
View 1 Replies
Jan 17, 2016
My computer delivers a BSOD and reboots when I get to about 95% through a Windows backup. The error message points to VHDMP.SYS. It's actually failed intermittently for some weeks and then backed-up okay but today some 10 attempts have all failed. I've tried checks to the limit of my technical capabilities (checked disk and memory).
View 5 Replies
