Drivers/Hardware :: Log File That States Drivers And Time They Loaded
Feb 23, 2016
I have a driver that loads late in the boot process. On every boot, the Win 10 boot process is interrupted about half way through by the "Found new Hardware" notification sound. It then continues to boot normally with no errors.Is there a log file that states the drivers that are loaded, and the time they loaded? If not, is there a 3rd party software that can give me that information like the old Dr Watson?
I figure the hardware driver making the "new hardware" sound is probably the last one to load, and I can find which one it is by observing the time it loads.I have unplugged every USB and other peripheral device with no luck. I have no flags in Device Manager, even the hidden devices have no errors.
View 3 Replies
Similar Messages:
Dec 13, 2015
I'm using a current Intel NUC (NUC5i3RYH) running Windows 10 Home x64.
I have this infuriating problem which may be related to the hardware but may also possibly be fixed in the OS. I've had no success so far changing power and sleep settings in the BIOS and Device Manager. I've had no luck with Intel directly.
The symptom is that any (of two different) USB TV tuners I use seems to lose the quality of signal anything from 20 minutes to an hour after I access that channel. If I change channel and then return straight back it instantly fixes it.
any registry or other settings I could try? Alternatively some utility or task I could use to poll or wakeup the port periodically? I'm just lost on this and have spent over a month off and on trying to work out ways of making it work.
View 6 Replies
Sep 1, 2015
I use Chinese Tablet Telclast Air 3G come with Windows 8.1 with Bing upgraded to Windows 10 Home.
Now I have problem with touch screen which I need to re-calibrate every time I turn on after turn off and charging tablet. When I turn on tablet touch screen is mess and I need to use external keyboard to log in and re-calibrate touch, if I turn off tablet with out charging it after turn on it work fine what can I do to solve this problem?
I never had this issue with windows 8.1 and after I upgrade to windows 10 it work for a few week then this problem occur.
My spec:
Intel Atom Z3763F
Ram: 2GB
Intel On Board graphic card with latest driver
View 1 Replies
Feb 2, 2016
I have lost all my Favorites in Edge. I have recovered a copy of the desired Favorites and have placed these favorites on my desktop as a file folder. The file structure has all the folders, and within each folder, the links to all the favorite websites. I have tried placing the contents of this file into the following location:
C:UsersAdminAppDataLocalPackagesMicrosoft.MicrosoftEdge_8wekyb3d8bbweACMicrosoftEdgeUserDe fault
I understand that this is the default location for Edge Favorites. With the desired "Favorites" folder placed and verified in the above location and I open Edge and click on Favorites and all I see under Favorites are two folders "Favorites Bar" and "BookmarksBar" (as expected both currently empty). I had hoped to see also an expandable "Favorites" folder with all the subfolders. How to use the previous referenced Desktop file folder or its content to restore my Favorites in Edge.
View 3 Replies
Oct 5, 2015
I now have issues with Windows 10 starting up. I've tried using the win 7 disc to do a repair but it's hard to tell if it's done anything. All I have right now is a mouse cursor and a black screen and because it was win 10 I have no disc for it. Just older versions on my flash drive but I can't seem to access it.
View 7 Replies
Jan 20, 2016
File explorer is struggling with my 2 external WD My Book 3TB HDD
Problems: 1 of the drives will keep running randomly all night (and gets real hot) after PC shut down. When trying to write a batch to one of the drives explorer keeps trying to access the drive, cannot open it and becomes unresponsive (task bar icons disappear).
View 2 Replies
Nov 4, 2015
I installed Windows 10 and now can not get my email back, what do I do? When i open the mail icon - it states not synced yet
View 1 Replies
Jan 29, 2016
I'm running Windows 10 Pro, Build 10586.71. Why I have my external hard drives showing twice in File Explorer (see Attachment) ...
I've had this since the first install of Win 10 ...
View 1 Replies
Dec 1, 2015
I just put the 1511 upgrade on (for the third time, but that's another story). I've noticed that when I open File Explorer I have a WHOLE BUNCH of USB ports that have nothing plugged into them... What the upgrade did, but these weren't visible previously. How do I turn them off?
And yes, I've gone into the File explorer options in the control panel and UNCHECKED "Hide empty drives". Didn't appear to make any difference...
View 9 Replies
Sep 6, 2015
The volume (V:) is formatted as Fat32. Maximum Fat32 volume size is 2 TB. To regain all of the volume space, format as NTFS, or split into 2TB and 1TB Fat32 volumes.
View 1 Replies
Nov 13, 2015
I was in the process of updating several sata controllers and chipset drivers. I also installed a new USB 3.0 hub and was in the process of moving around several devices between ports. I had a problem with my keyboard which uses USB 2.0 as a connector but I would recieve a "Unknown USB Device (Port Reset Failed)" code 43 on every port on the USB 3.0 Hub. I finally gave up and put the keyboard back into the 2.0 ports on my motherboard. When I finally fixed everything. I realized my DVD drive was not working. I had to reconnect the SATA cables because it got disconnected while I was moving my PC around. Upon the last restart of my PC.
I checked Disk Managment and noticed lots of system reserved partitions and drives which were not there before. What happened but I think updating several drivers and the combination of reinstalling USB ports via device manager or the optical drive being reconnected may have messed up how windows used to have system reserves as partitions. I only had one visible system reserved drive before, now I have 2 visible and lettered system reserved drives.
I also have a unknown partition at the top of the list, I cannot right click that partition and select any options. The only option in my context menu which brings me a link to Overview of Disk Management
I also had my video quick access as my DVD optical drive when I restarted. I have fixed this issue by changing my quick access links back to their proper folders and it removed the duplicate Videos Icon. My quick access links were remapped to the G: drive (CD Drive), they were usually on the F: drive. Why Windows did that during my driver updates and restarts.
I have only provided the above information to know what the unknown partition is and why I cannot modify or remove it. It's the recovery partition of the C: Drive. The System Reserved E: Drive, System Reserved D: Drive are both considered primary partitions.
Should I be concerned or is this all normal?
View 3 Replies
Nov 22, 2015
As shown below there are 2 drives missing from the Navigation Pane (vertical bar on the left of the File Explorer). How do I show them up there?
View 9 Replies
Aug 18, 2015
After a system refresh of Windows 10 all external disk storage drives, Micro SD and USB are listed twice in file explorer. This is a common problem, reported many times in forums and community support web sites. Could a solution be to reload file explorer. Is this possible and where would I find the download?
View 1 Replies
Nov 1, 2015
Unable to load media file to Sony Vegas Platinum 13.0 since I upgraded to windows 10 from 7, error message Unsupported Open GL version. HitFilm requires 2.0 or above. Current hardware GL 1.1 GLSL 0.0. This happened after the upgrade to windows 10.
How do I get the GL 2.0 or above?
View 1 Replies
Sep 13, 2015
Windows states that my Lexmark wireless printer is offline yet I can print from other computers in the house not running Windows 10 ... Model X4650 ....
View 1 Replies
Nov 15, 2015
when I try to print any documdent with a print command, I only get anoption to save the document as a tiff file. Saving the document and then trying to print it gives the same "save as" option again. Printer is HP photosmart 6100 series.
View 1 Replies
Aug 28, 2015
Why can Microsoft understand I don't want to use these POS Realtek drivers. I use to disable driver updates from Windows 10 by going into Device Installation settings and Never install drivers from Windows update but now since the last stupid update everytime the POS Realtek drives install automatically no matter how many times I roll back and remove them. I hate the Realtek drives because the audio is super loud and sounds terrible. I just want to use the Microsoft HD Audio Driver which sounds great and uses little resources but no Windows 10 decides that the POS Realtek driver is better.
View 7 Replies
Jul 29, 2015
Just like the title says, I don't want the realtek audio drivers as it completely messes with my audio and also doesn't correctly switch when i plug in headphones for example.
It also doesn't allow for the 'speaker fill' enhancement to be used when playing stereo content through surround sound.
Windows itself does a far better job as opposed to realtek.
Every time i uninstall realtek it automatically gets reinstalled.
View 9 Replies
Aug 29, 2015
Upgraded old laptop (HP Pavilion dv2225) to WinX and everything works except for sound. Device Manger (Win key+ X) shows no missing drivers for sound. Used to play AoK under Win 7.
View 2 Replies
Jan 28, 2016
I have been installing and reinstalling windows 10 through bootcamp 6 on El Captain on my Macbook Pro.
But i keep getting the same result - the speakers and right click option are missing.
Where i can download drivers for Windows 10 on bootcamp 6 or what other way to resolve this issue.
View 5 Replies
Jul 17, 2015
I'm using build 10240, and in the first install, it installed the Realtek audio drivers.
The problem with these drivers is that they completely mess up the sound in my headphones.
Anyways, I've tried : Uninstalling the audio manager in control panelDeleting the oem#.infUninstalling the drivers in Device Manager
None of these work. When I uninstall it, the driver is just reinstalled when my computer reboots.
View 9 Replies
Mar 5, 2016
so before I wiped my entire PC the sound was working flawlessly - I would use the audio inputs for the Razer Blackwidow Chroma and it would work perfectly.Since the reset however, no sound has been discoverable, I get a red x on my speaker, and it says "No audio drivers installed" on "Playback Devices" I have tried putting my headphones in every audio jack on my PC (front, back and keyboard) and it still isn't picking my headphones up, I have installed the latest drivers and still no joy.
View 1 Replies
Sep 21, 2015
Unfortunatley I am unable to install any driver for my phone; the Oneplus One. This is the error I'm getting:
"one of the installers for this device cannot perform the installation at this time"
I get the same error for ADB and Fastboot drivers.
View 4 Replies
Aug 9, 2015
After upgrade from 7 to 10 my 2 brother printers were visible and apparently ready. The HL2270DW would not print - just spooled forever but the MFCJ825DW worked. I tried using the Brother uninstall tool to remove the laser driver then installed the W8.1 package for it. Would not install. So I wondered if the other printer was to blame and removed it as well and re-installed. I have done this many times now getting progressively more thorough including removing all mentions of Brother drivers using Devices and Printers interface, uninstalling in Device Manager installing in a different order and as administrator, removing folders left over etc. The result is always the same. I can get one of them installed but attempting to print gives the error Driver not installed - do you want to install? Click through, install via windows process but it fails anyway.
View 2 Replies
Dec 28, 2015
It used to be possible to do this in Device Manager IIRC, but with Windows 10 installed I can't see how to get a device driver report. Has this been taken away? If so what will produce such a report?
View 3 Replies
Nov 6, 2015
I just got this laptop (Dell Vostro 3558 i3), a few days ago i upgraded to windows 10 using the media creation tool. After the upgrade, the touch pad works but I cannot scroll. I have tried uninstalling the drivers and reinstalling them. When I upgraded there was nothing listed that went along the lines of synaptics in the control panel (uninstall).
I have tried installing the drivers of windows 10 and windows 7 from the dell website, what happens is quite weird, the installer says it installs without any errors but nothing happens, there is no synaptics program listed in the control panel.
Excuse me if I left any important details out but it is the first time that i have come across this issue and don't know what info I should give. I should also note that before I upgraded the touch pad worked along with the program of the drivers, now all I get is the usual mouse options and in device manager it recognizes it as a P/S2 mouse.
View 2 Replies
