I just changed from DVI to HDMI and now when I shutdown my computer my monitor will not enter sleep mode, and will display 'Cable Not Connected' as shown in the image attached.
View 2 RepliesI installed Windows 10 one week ago, but I still have issues with the sleep mode. I configured the laptop, that whenever I close the lid or I use my function key the sleep mode is started.
Unfortunately the laptop is either not entering the sleep mode correctly or is not able to restore it. Which means when I open several programs they won't open again.
If have an ASUS Transformer Book Flip TP500LA:
Intel i3 4030
4 GB Ram
240 GB SSD
I tried the following so far: BIOS Update to the newest version 203Downgrade the Intel MEI driver to an older oneReinstall the graphic and touchpad driver Nothing of that was successful. Are there any logfiles to analyse?
I recently got a new monitor, an Eizo EV2750, which Windows only recognizes as a generic PnP monitor.
I've tried connecting it thorugh DisplayPort, HDMI and DVI without any luck. The often mentioned sollution, to unlplug everything and wait 10 minutes, does not work either.
The graphics card seems to read the EDID however, as in nVidia control panel it displays correctly as EV2750. Same thing with other applications, like DisplayCAL which I use as my color management system.
Seems like it's only an issue with Windows. This issue, however, also means that I can't get full functionality from the monitor. For instance, the ambient light sensor does not work (which is typical when Windows doesn't recognize the display properly).
I have installed W10 twice using the update feature. Everything work fine except when I want to shutdown or put the machine to sleep by clicking on those options, the machine makes noise like the HD is working. It then just shuts down and reboots again. The only way I can shut it off is by using the button on the computer.
View 2 RepliesI had recently performed a clean reinstall when I upgraded my laptop to a Samsung 850 Evo, and ever since then I've had problems with sleep. If I initiate sleep, hibernation, or shutdown then the screen goes black but the status LEDs stay on. punching all the buttons do NOTHING, with my only recourse being to press the power button until the lights go out. After which the system acts as if I woke from hibernation as normal. Restarts are unaffected, which is a good thing as having to force-restart my laptop every week will get old fast.I believe I have installed all needed drivers, and Device Manager does not show anything missing.
View 1 RepliesI have tried disabling some suspect services tasks, and drivers, but nothing works. I have a couple of MiniDumps here which haven't told me much.
View 1 RepliesHow to enable Sleep? Power only gives me Shutdown & Restart
View 7 RepliesEverytime I reboot my monitor says Monitor is going to sleep, then logo from Dell then boots, been doing this for a year, I use no sleep functions in power options,
View 1 RepliesWhen I put my laptop to sleep and then attempt to wake it up, it will power on (going through the boot up screens) instead of just waking up, thus causing me to lose any information open on the computer.
I have tried a few things to try to wake it up to no avail:
sfc /scannow in cmd
unplug all usb devices before going to sleep/waking up
rollback graphics drivers
resetting power plan settings and power button settings back to default state
Is there some memory dump file to fix this?
I upgraded from 8.1 to 10 on the 29th. At that time my system would go to standby sleep without and issue. Since the big day, I can only get it to sleep by using the sleep option on the shut down or sign out drop down.
I have reinstalled my graphics card drivers. I have also reinstalled my network adapter and deselected the option in power management to "allow this device to wake the computer".
I can't remember when and how this started, but definitely after upgrading from Windows 8.1 to Windows 10 Pro.So, my screen (Acer LCD, connected to GTX 560 with 1 meter DVI cable) started going black (power light on, background light completely off) when I watched a video that had lot of dark on it. Happens in some games as well where the cut scenes change.
I tested it by full screening a plain black image and the screen went to sleep, mouse cursor dissapeared.Moving the mouse does not wake up the screen, only when i press Win key to bring up some color to the screen. (the task bar seems to be enough to wake the screen.)I have checked all the power settings and turned off all the sleep settings, 'Turn off display after' is set to 'Never' 'Multimedia settings' are set to ' Prevent idling ' and 'Optimize video quality'
Every time I try to put put my laptop to sleep, hibernate, restart it or shutdown, it stalls for about 10 minutes before giving me a Driver Power State Failure.
Having installed "WhoCrashed" and "Windbg", I was able to determine it was related to "ntkrnlmp.exe", "ndis.sys", "raspppoe.sys" and a vpn driver at one point or another. I "believe" I managed to uninstall the offending vpn driver but of course still overall have the same issue.
This appeared to occur while trying to do a windows update last week but I can't be sure. I presume, there is a out of date or corrupt driver but just can't seem to determine which one.
My laptop, running Windows Ten from a clean install, has issues with the sleep function. About once a day, when I either put the computer to sleep or when it does it on its own, the screen will go black but the computer will not stop running. All the lights are on, the fan and disks keep running. Nothing works to turn the screen back on and my only option becomes to force a shut down.
I've tried tweaking all the power options in various ways, I've tried disabling/enabling hibernation/fast start and I've searched for an answer but I do not have one.
The computer goes to sleep after a period of inactivity, when mouse or keyboard is used the tower starts up but the monitor won't. I've gone into Device Manager and made sure mouse and keyboard will wake machine, but alas, no monitor. Must reboot every time.
View 3 RepliesSince upgrading from Windows 7 x64 to Windows 10, my monitor/display on my desktop will no longer go to sleep/turn off after the scheduled 5 minutes. I had no issues with this in Windows 7. I have updated the BIOS, video drivers, USB wireless mouse driver and anything that could be related and no change. All i want is for the monitor to turn off after the set time. I don't use a screensaver. There is no driver update for the monitor (Viewsonic VX2450). I've also tried uninstalling the monitor driving and reinstalling but no change. Seems like the system also will not sleep when set to sleep.
View 3 RepliesI set monitor to turn off after 15 minutes and computer to sleep after 3 hours, none of that works unless i disconnect game controller, than it works perfectly. is there any way to solve this or i just to wait for microsoft to release some kind of update?
View 1 RepliesI'm running my audio via HDMI from my graphics card and it plays through the speakers built into my monitor.
When I first did the Win 10 update I had no audio whatsoever, and followed some suggestions on online forums that lead me to disable the Realtek High Definition Audio which I did and upon a reboot- my HDMI audio was working.
But then I had another weird issue. My PC is set to never sleep as I use it as a media server, but my screens turn off automatically after 10 minutes. What im finding is that when I wake up my monitors the audio stops. When I view playback devices I can't do any tests because "the device is already in use by another application"
(note: I have the checkbox for allowing an application to take exclusive control of a device un-checked).
So far there are only 2 ways to restore audio. 1) restart the PC. 2) go into device manager > Sound, video and game controllers > AMD High Definition Audio Device > Disable... wait a few moments > Enable.
I upgraded to Win10 about a month agn Friday my pc was stuck in the Automatic Repair Loop. I tried alt+ctrl+del no result. I reboot and pressed F10 the monitor went to sleep mode. When I pressed the on button on the monitor, the Monitor Status reads as follows:
DVI: No signal
VGA: No signal
Auto Switch Source: on
Default Source: DVI
At a point in time, a msg appeared saying "check video cable" so I used the VGA cable on two different ports no success. I bought a DVI-D cable and used it still the monitor is in sleep mode
Freezing, black screen, no cursor, monitor goes to sleep, computer still running after upgrading to Windows 10 from Windows 7. Must manually force computer shutdown. HP desktop.
View 1 RepliesIf I leave Western Digital My Book plugged into a usb3 port at shut down there will be a restart in a few seconds.
This has been the action through both versions of Win10. (Currently on the 2nd version as of Nov.20) At this time the only items that allow restart are mouse, keyboard and network adapter Fast Start is turned off An extra usb3 board was installed during the first Win10 but two usb3 items cannot be inserted side by side.
One will read as a usb2 if two are inserted into the new 2 ports in the rear. This My Book now is the only item plugged into that back USB3 port. The drivers for usb3 appear to be current according to the mfg site. When this external is ejected then the computer shuts down. On Win7 pro this external could be left plugged in all the time.
Is a line of attack to remove this new usb (2 on front, 2 on back) and start over with another?
I just recently updated. I then created a boot disk and performed a clean install. I use a Razor Black Widow Ultimate keyboard and a Logitech G9x laser mouse. I can reboot, I can shut down and restart and everything seems to work fine. But, after leaving the pc off all night and start in the morning I have no mouse or keyboard. This has happened Saturday morning, Sunday morning and yet again today. Fortunately, I have Acronis backup of my install, so when this happens I just re-image the hard drive and start searching for solutions again.
I have the latest Logitech mouse drivers and running Razor Synapse for keyboard software.
The latest thing I have done is disable fast boot but have not had it shut down long enough to see if it fixes the issue.
I have a dual monitor setup. I have 2 AOC e2252V monitors that would work fine on Windows 7. I have all updated drivers. I've checked the internet for multiple solutions but everyone's problem seemed to be that they didnt extend their displays. My problem is that both windows 10 and my graphics card are not detecting it. They are both connected to the DVI-D connections on my MSI R9 390 graphics card (installed with the latest drivers from 11/30/2015 on the MSI website.) One monitor is hooked up from VGA through a DVI-D adapter to connect to my graphics card. I assumed this wasn't the problem because I did the same thing on my previous card where it worked just fine. I checked to see if one of my DVI-D connections were faulty on the card, but my one monitor hooked up directly through a DVI-D cable (no adapter) works on both of them. If I hook up my TV through HDMI connection, it will detect my TV. I wonder if this is a problem with Windows 10, MSI R9 390, or the adapter. [URL]
View 4 RepliesI'm having trouble to get picture on my main and only monitor when booting up. The green led indicator on the monitor is just flashing.
Usually I have to push the restart button 10-15 times until picture finally appears. Sometime I am able to log on in the dark. Hit space and logon, then do a win+p until picture appears.
I've tried to uninstall the drivers, but that didn't solve it. I had to use a different monitor to get in for the first time after that. Driver is the most recent one.
Just got a new monitor today, Samsung S24D300HL which I have plugged into my Nvidia Geforce GTX 745 video card via HDMI.
Picture is great no problems there. However I have no sound at all. I've updated my graphics driver via Nvidia Experience program version 361.43 I've right clicked and went to Nvidia control panel audio tab and my monitor was listed there as audio under HDMI still no sound. I've restarted the computer a couple times. Checked Windows update. Switch to a different HDMI cord and still no sound. I've right clicked the speaker in the taskbar and went to playback and what I have is. Nvidia HDMI Output (Port 0) and Nvidia HDMI Output (Port 1) both say not plugged in. I'm confused about the Port 0 and Port 1 because there is only one HDMI spot on the back of the card.
for a month or so I have a samsung tv-monitor (27 TV monitor with the blue Touch of Colour (Black) (LT27D390EW/XU) | Support | SAMSUNG UK ) . Problem is that sometimes (rarely tbh -like once a day) the monitor reboots itself (the screen for 1 sec turns black in my next sec throws the Samsung logo and then it comes back to where it was before.
The monitor is connected to hdmi cable at 1080p resolution and I also have and an internal S / PDIF cable to get the sound passing from the motherboard to the gpu.
I sent the monitor to Samsung where they told me that this is a software problem that comes with windows 10 and that as far as they are concerned there is no solution to this other than reverting to windows 7. I had already installed windows 10.I have already tried installing the drivers that Samsung have on their site but it wont fix the problem.
I'm trying to tune a new AOC monitor, model E2250Swdn, as when plugged into my laptop I noticed that my taskbar on the new monitor appears to have less blue to it than is presented in the attached image below. looking at the screenshot here that I took on my laptop's screen of my taskbar, what adjustments I need to make to the monitor? is it color correction, gamma or brightness?
View 1 Replies