I received an update for windows 10, and after installing, my mouse didn't work. I tried several other mice, and none of them worked. I looked more into the problem and after a while of exploring Device manager, the drivers weren't installed, but when I followed the instructions to install the drivers, it said the drivers didn't exist, even though a couple hours before hand, the mouse had been working fine.
View 2 Replies
I started to upgrade all my drivers since I downloaded windows 10. Everything was going along fine until I hit the driver on my mouse. Gone the mouse disappeared. There was no way to get it back. So I finally hooked up another mouse and tried to go back and roll back the driver to the other version. The roll back box won't lite up and it has to be lite to be able to roll back.
View 8 RepliesI have a Acer Aspire E17 with a precision touchpad. The touchpad works, but I prefer the mouse. Sometimes when I am using the mouse I hear a strange sound then it stops working. It only lasts for about 10 seconds then the sound returns and the mouse works again.
View 5 RepliesI recently upgraded from windows 7 to windows 10. My mouse worked fine in windows 7, but it does not work in windows 10. Without my mouse to work with, I am lost on the computer.
Information from the Control Panel (System) is as follows:
HP pavilion dv5 notebooselectk PC , windows 10 Home , 64-bit operating system .
The mouse that I have is a Rocketfish Nano Laptop Optical Mouse.
Information from the Control Panel (Harware and Sound) (Devises and Printers) shows an icon
of the RF Nano Laptop Optical Mouse.
When I select the icon , there is information at the bottom of the page that reads:
RF Nano Laptop Optical Mouse Status: Driver error
Model: Rf Nano Laptop Optic...
Category: Mouse
Status: Needs troubleshooting
More info from the Control Panel (Hardware and Sound) (Devises and Printers) is taken from the Mouse link.
The (Hardware tab) in the Mouse link shows two different types of mouse.
One is a Pluralinput Mouse 0.8.2.0 and the other is a Synaptics P/S2 Port Touch Pad.
The Pluralinput information reads:
Manufacturer : Pluralinput
Location : on RF Nano Laptop Optical Mouse
Devise status : This devise cannot start (Code 10)
I have just upgraded to windows 10 the other day. I am running an Acer Aspire Notebook R3-471T, Intel HD 4400 Series, i5-4210U @ 1.7GHz 2.40GHz, 6GB Ram. So after i upgraded to win 10, i downloaded auto detect driver update from acer and intel. I updated all my drivers and then i downloaded some games. Apparently every 4-5 secs mouse freezes for a fraction then goes back to normal. I can't play anything because every 5 seconds my mouse (therefore the gameplay) freezes. I didn't have this problem on win 8.1.
View 1 RepliesEvery 5/10 minutes, my mouse pointer keeps sticking, for around 1 second, then jumps to where it should have been. It's almost as if the pointer isn't actually sticking but the screen isn't updating. This started happening after upgrading to Windows 10.
View 4 RepliesI've had a Logitech M510 mouse for about a month and time is running out on a return. My problem is jerky and intermittent movement problems. These may have a workaround my using a USB extension cable since moving the receiver away from USB 3.0 ports may eliminate the interference.
I'm thinking of returning the mouse tomorrow before the return term expires. Are there mice that do not exhibit the 3.0 interference or is this simply a technology impediment to using wireless mouce?
Okay so I had this problem in windows 8.1 but fixed it by turning off smart sense which still has the same function in windows 10 but it did not work. I am looking so find solutions online because this problem is really annoying when it comes to games.
View 9 RepliesI just upgraded to Windows 10 a few days ago on my desktop. After it booted for the first time, everything worked just like before on Windows 8.1.
After a bit, it prompted me to restart for updates. After it finished with the updates, I noticed that the mouse started a major stuttering problem when scrolling.
I noticed it first in Chrome, so I switched over to another program (Notepad++) and it did it over there as well.
I am assuming that it was caused by the update after upgrading to Windows 10.
I've got this issue that comes and goes. So basically my mouse wont click my taskbar sometimes and on google chrome when i press on one of my bookmarks it opens a new tab instead and when i press on it, it closes down, and no im not pressing the X, its wherever i press it will just close down.
This issue started happening this summer when i did a fresh install of Windows 10 but then i fixed it by restarting explorer.exe and it disappeared but now even that wont work. It started to happen again when i installed Windows 10 on my SSD yesterday and the problem just showed up and then after a while it disappeared but now its back again.It is really frustrating. i read somewhere that it could be my middle mousewheel that is lagging up but i dont think so.
I successfully upgraded (well not without issues!) to Win10 Pro. I have been having issues where when I click on something the computer just goes into La La Land. Only way I can get out is to do a hard reset or hold down the power button for four seconds. I am not sure what error report to look at to see what is hanging up the system. Initially the machine did not like my old Logitech Trackman Mx trackball unit so I shut down the machine and unplugged it and plugged in a standard USB Microsoft mouse. The issue is still there but not quite as bad. Seems to be related to moving and clicking the mouse.
View 1 RepliesAfter I installed Windows 10 from windows 7 I couldn't use my mouse and keyboard it works when I boot up BIOS Utility but when im on windows 10 it does not work. I tried switching usb ports and that didn't work either.
View 9 RepliesI just upgraded from 8.1 (brand new) and I can move my mouse cursor for a couple seconds then it freezes and starts showing a loading circle every few seconds.
View 6 RepliesAfter upgrading to windows 10 my touchpad was not working, after googling around i saw someone say that windows 10 turns it off by default so i went through the device manager and turned it back on but now it is unable to click on anything and i can't use the two finger scroll thing that i use to be able to.
View 1 RepliesAfter the latest updates to Windows 10 on 1 September, my Logitech mouse has lost several of its functions (including the scroll function) in all applications. I downloaded the latest Setpoint and reinstalled it and then rebooted, but nothing has changed.
View 9 RepliesI notice that the Mouse settings still will not be saved in Windows 10. This is one of those things that will drag on for ever before we see it fixed?
View 5 RepliesLately mouse wheel has not been working. When I press the middle mouse button, the wheel appears for just a little bit, and then disappears. I can't use it to scroll.
View 9 RepliesIs it possible to enable 4 way scrolling with Apple Magic Mouse on Windows10? I loaded the drivers from Bootcamp which enables 2 way scrolling. The only drivers I have found that work well are from Parallels on my Mac. Trying to enable the same capabilities on my PC with the Magic Mouse.
View 1 RepliesI downloaded Windows 10 a few days ago, and every time I turn off my computer and log back in, my mouse settings revert back to their defaults. The defaults have a lot of annoying extra features, and the scroll is backwards. Every time I change the mouse settings to my preferences and apply them, on the next restart they are back to defaults.
How to make my settings permanent? I'm sure once a patch or two for Windows 10 comes in the problem will sort itself out, but in the meantime?
I have just bought a brand new Viglen Omnio 5 all in one PC pre loaded with Windows 10. Everything works fine except that when I go into file explorer and try to right click on a file to edit/copy etc it just hangs and locks the whole screen. The mouse works perfectly on everything out of file explorer. I know this problem has been around for a while but I cannot find a solution anywhere. Because the OS was preloaded I don't have any driver discs.
View 8 RepliesJust upgraded to 10. Not blown away so far, but it's a lot less stupid than 8. Glad they gave it away for free, seems like the fair thing to do considering they actually charged people money for 8.
Anyway, I'm here because my mouse settings keep reverting back to factory every time I restart the laptop. I can't stand finger gestures and tap to click, but they keep coming back like a bad case of herpes. Unlike my herpes, I'm still hoping I can cure this problem.
In the Device Manager I went to Mice and other pointing devices > HID-compliant mouse > Properties > Power Management > Allow this device to wake the computer, and unchecked it. But still the mouse wakes up the laptop from sleep. Why?
View 1 RepliesRecently, I acquired a Microsoft Bluetooth Mouse (3600). It works perfectly well, both on my Android tablet and on my old but efficient Netbook (still running valiantly under XP SP3). Never a problem in pairing the mouse on these two machines (and no problem either with the Logitech Bluetooth portable keyboard (K480), which is a real marvel in its own right).On the Android Lollipop tablet, Bluetooth is built in, while the built-in Bluetooth feature on the Netbook gave up some time ago, but was replaced by a dongle, which does its job without a hiccup.
So far, so good.On my desktop, running on Windows 10, which has no built-in Bluetooth capability (but the Bluetooth "service" coming with Windows), I use the same dongle as on the Netbook. With the Logitech keyboard mentioned above, no problem whatsoever: Bluetooth "sees" it immediately and pairs it in seconds - so there is certainly nothing wrong either with the dongle or with pairing a device, or the Bluetooth drivers and softwares, which came with the dongle, or with the Windows Bluetooth properties, which are correctly started and functioning.)
It's the Microsoft Mouse that presents an apparently intractable problem on that same desktop.
When activating the Mouse so that it can be detected when one wants to add a device, it is "seen" almost immediately. It is when wanting to pair the device to the machine that the problem arises. The pairing as such takes a far longer time than it normally does and when that operation concludes, I get error messages saying either that the mouse did not send the correct pairing code OR that it did not send a pairing reaction at all.
So, this is quite mysterious. Having a device that functions perfectly well with other machines, and not at all on my powerful desktop (while it can be detected, and while other devices function normally).I guess that the problem resides with that "code". However, Windows does not ask for it and Microsoft says that the mouse does not need one - which makes things even more strange, since it mentions a code when the pairing misfires.They are in Dutch (language of my Win OS) but the images speak for themselves. The error message on the 3rd screenshot says: "Communication with Bluetooth device has failed / No pairing reaction received". Sometimes (after bootup) the error message says failure but "Bluetooth device sends wrong code".
I recently upgraded to Windows 10 and now find that I can not disable the touch pad as I did in Windows 8. I have found I can disable it except for the buttons but when the computer starts again I have to disable it again.
View 2 RepliesOften when playing games, either in browser or not, the mouse pointer speed will change by itself. I can go into the mouse setup menu and change it back, but sometimes it then changes again. This happened in Win7 also. The touchpad also sometimes just stops working. This didn't happen in Win7. I gotta say Win10 makes some weird changes to things
View 1 RepliesWith Windows 8.1 either mouse button could be used at the login screen to select a user account for login. In Windows 10 it seems that only the left mouse button can be used at the login screen. With kids, some of whom are left-handed and use the mouse left-handed, this is confusing, as they click on their user name but nothing happens. Once they login the mouse buttons work as they expect, but for the left-handed ones, the mouse doesn't work as they expect at the login screen. The previous Windows 8.1 behaviour was preferable.
View 4 Replies
